Roof Replacement Cost Calculator — Texas
Average roof replacement cost in Texas: $15,467 (typical range $13,611–$17,787, $7 per sq ft of roof area). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
How much does a roof replacement cost in Texas?
Based on current Texas labor rates and material prices, a typical roof replacement costs about $15,467. Most projects fall between $13,611 and $17,787, or roughly $7 per sq ft of roof area. This example assumes: footprint 1,800 sq ft, roof area 2,277 sq ft, roofing squares 22.8 sq, material Architectural shingles.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 1,000 sq ft | $9,752 |
| 1,500 sq ft | $13,275 |
| 2,000 sq ft | $17,799 |
| 3,000 sq ft | $24,835 |
Where the money goes
- Roofing$10,874 (91%)
- Permits & setup$738 (6%)
- Roof decking$343 (3%)
Materials $5,511 · Labor $3,808 (86 hours) · Equipment, disposal & permits $2,637 — before contingency, contractor overhead & profit and tax.
Texas vs. United States average
A typical roof replacement in Texas costs 8% less than the United States average ($15,467 vs. $16,823). The difference comes mainly from local wages — a carpenter earns on average $24.51 per hour in Texas — and from regional material prices and Sales tax (materials) of 6.25%.
Roof Replacement in Texas: local factors
Texas ranks 46th of 51 states for roof replacement cost (1 = most expensive) — among the most affordable.
| Nearby state | Typical cost | vs. Texas |
|---|---|---|
| Texas | $15,467 | — |
| Arkansas | $15,044 | -3% |
| Louisiana | $15,902 | +3% |
| New Mexico | $15,623 | +1% |
| Oklahoma | $15,415 | -0% |
What affects the price in Texas
- Hurricane-force winds: Expect hurricane straps or clips at the roof-to-wall connection, a sealed roof deck (secondary water barrier) and wind-rated shingles. A wind-mitigation inspection afterward can reduce insurance premiums.
- Hail: Class 4 impact-resistant shingles cost about 10–25% more but qualify for insurance discounts in many hail-prone areas.
- Hot summers: Reflective “cool roof” shingles or light-colored metal reduce attic heat and cooling bills.
Permits & contractor licensing in Texas
- Contractor license: Texas has no statewide license for general or remodeling contractors. Plumbers are licensed by the Texas State Board of Plumbing Examiners, and electricians and HVAC contractors by the Texas Department of Licensing and Regulation (TDLR).
- Building code: Cities enforce the International Residential Code (the edition varies by city). Unincorporated county areas have few building rules, so check what applies at your address.
- Permits: Permits are issued by the city. In the 14 coastal counties, windstorm certification from the Texas Department of Insurance is needed to keep TWIA wind coverage.
Verify a contractor: Texas Department of Licensing and Regulation (TDLR) ↗. Rules change — always confirm with your local building department.
Labor rates for this project in Texas
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Roofer | 61 | $22.69 | $45.38 |
| Construction laborer | 25 | $20.63 | $41.26 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a roof replacement includes
Roofers price by the “square” (100 sq ft of roof). The total depends on roof area, pitch, the material, how many old layers must be torn off and how much decking is rotten. Steep and multi-story roofs need more safety equipment and labor.
Main cost factors
- Roof area and pitch
- Roofing material
- Layers to tear off
- Decking replacement
- Chimneys, skylights and gutters
How to save money
- Get the decking checked — replacing a few sheets now prevents leaks later.
- Architectural shingles cost only slightly more than 3-tab but last longer.
- Replace gutters and flashing at the same time to save on labor.
- Book in the off-season for better availability.
Timeline
1–3 days for an asphalt roof on a typical house.
Permits
Most cities require a re-roofing permit; some limit the number of shingle layers to two.
Frequently asked questions
How much does a roof replacement cost in Texas?
A typical roof replacement in Texas costs about $15,467, with most projects between $13,611 and $17,787. That is about $7 per sq ft of roof area.
How much of the cost is labor?
Labor is about 32% of the direct cost (86 work hours) for a typical project in Texas. Materials are $5,511 and equipment, disposal and permits $2,637, before contingency, contractor overhead and tax.
Is a roof replacement cheaper in Texas than in nearby states?
A typical roof replacement costs $15,467 in Texas. Among nearby states, Arkansas is the lowest at $15,044 and Louisiana the highest at $15,902. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Texas?
Texas has no statewide license for general or remodeling contractors. Plumbers are licensed by the Texas State Board of Plumbing Examiners, and electricians and HVAC contractors by the Texas Department of Licensing and Regulation (TDLR).
What local conditions affect roof replacement costs in Texas?
Expect hurricane straps or clips at the roof-to-wall connection, a sealed roof deck (secondary water barrier) and wind-rated shingles. A wind-mitigation inspection afterward can reduce insurance premiums. Class 4 impact-resistant shingles cost about 10–25% more but qualify for insurance discounts in many hail-prone areas.
How long does a roof replacement take?
1–3 days for an asphalt roof on a typical house.
Do I need a permit for a roof replacement?
Most cities require a re-roofing permit; some limit the number of shingle layers to two.
How do I measure my roof?
Enter your house footprint and pitch — the calculator converts it to roof area and squares.
Metal vs. shingles — which is cheaper long-term?
Metal costs more up front but lasts 40–70 years versus 20–30 for asphalt.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Roof Replacement cost in other states
Compare roof replacement costs in every state, province and territory →