Block Wall Fence Cost Calculator — Texas

Average block wall fence cost in Texas: $19,284 (typical range $16,970–$22,177, $193 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Texas pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a block wall fence cost in Texas?

Based on current Texas labor rates and material prices, a typical block wall fence costs about $19,284. Most projects fall between $16,970 and $22,177, or roughly $193 per linear foot. This example assumes: length 100 ft, height 6 ft, blocks 709, face area 600 sq ft.

Cost by project size

Project sizeEstimated cost
50 ft$11,291
100 ft$19,284
200 ft$35,749

Where the money goes

  • Block wall$9,072 (61%)
  • Excavation & footing$3,932 (26%)
  • Gates$776 (5%)
  • Permit & engineering$692 (5%)
  • Cap & finish$467 (3%)

Materials $6,169 · Labor $7,191 (152 hours) · Equipment, disposal & permits $1,579 — before contingency, contractor overhead & profit and tax.

Texas vs. United States average

A typical block wall fence in Texas costs 11% less than the United States average ($19,284 vs. $21,702). The difference comes mainly from local wages — a carpenter earns on average $24.51 per hour in Texas — and from regional material prices and Sales tax (materials) of 6.25%.

Block Wall Fence in Texas: local factors

Texas ranks 44th of 51 states for block wall fence cost (1 = most expensive) — among the most affordable.

Nearby stateTypical costvs. Texas
Texas$19,284—
Arkansas$18,604-4%
Louisiana$19,3690%
New Mexico$18,719-3%
Oklahoma$19,071-1%

What affects the price in Texas

  • Hurricane-force winds: Fences must resist high winds: deeper concrete-set posts, closer post spacing or reinforced masonry.

Permits & contractor licensing in Texas

  • Contractor license: Texas has no statewide license for general or remodeling contractors. Plumbers are licensed by the Texas State Board of Plumbing Examiners, and electricians and HVAC contractors by the Texas Department of Licensing and Regulation (TDLR).
  • Building code: Cities enforce the International Residential Code (the edition varies by city). Unincorporated county areas have few building rules, so check what applies at your address.
  • Permits: Permits are issued by the city. In the 14 coastal counties, windstorm certification from the Texas Department of Insurance is needed to keep TWIA wind coverage.

Verify a contractor: Texas Department of Licensing and Regulation (TDLR) ↗. Rules change — always confirm with your local building department.

Labor rates for this project in Texas

TradeHoursAvg. wage / hourInstalled rate / hour
Brick / block mason75$26.03$52.06
Construction laborer65$20.63$41.26
Cement mason / concrete finisher8$23.69$47.38
Ironworker / welder4$27.87$55.74
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a block wall fence includes

A concrete block (CMU) wall needs a reinforced footing, vertical rebar grouted into the cells, horizontal reinforcement, mortar and a cap. Stucco or paint finish adds cost and life. Walls over 4 ft often need engineering.

Main cost factors

  • Wall length and height
  • Block type
  • Footing and rebar
  • Pilasters and cap
  • Stucco or paint finish

How to save money

  • Closer rebar spacing is required in high-wind and seismic areas.
  • Split-face block looks finished without stucco.
  • Pilasters every 10–16 ft stiffen tall walls.
  • Plan drainage behind walls that hold back soil.

Timeline

1–3 weeks depending on length.

Permits

Walls over 4 ft (or retaining walls) usually need a permit and engineered design.

Frequently asked questions

How much does a block wall fence cost in Texas?

A typical block wall fence in Texas costs about $19,284, with most projects between $16,970 and $22,177. That is about $193 per linear foot.

How much of the cost is labor?

Labor is about 48% of the direct cost (152 work hours) for a typical project in Texas. Materials are $6,169 and equipment, disposal and permits $1,579, before contingency, contractor overhead and tax.

Is a block wall fence cheaper in Texas than in nearby states?

A typical block wall fence costs $19,284 in Texas. Among nearby states, Arkansas is the lowest at $18,604 and Louisiana the highest at $19,369. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Texas?

Texas has no statewide license for general or remodeling contractors. Plumbers are licensed by the Texas State Board of Plumbing Examiners, and electricians and HVAC contractors by the Texas Department of Licensing and Regulation (TDLR).

What local conditions affect block wall fence costs in Texas?

Fences must resist high winds: deeper concrete-set posts, closer post spacing or reinforced masonry.

How long does a block wall fence take?

1–3 weeks depending on length.

Do I need a permit for a block wall fence?

Walls over 4 ft (or retaining walls) usually need a permit and engineered design.

How many blocks do I need?

The breakdown shows the block count (wall face area ÷ 0.89 sq ft per block + 5%).

Block wall or wood fence?

Block walls cost more but last 50+ years and block noise.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Block Wall Fence cost in other states

Compare block wall fence costs in every state, province and territory →

More cost calculators for Texas

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming