Wood & Vinyl Fence Cost Calculator — Texas
Average wood & vinyl fence cost in Texas: $6,414 (typical range $5,644–$7,376, $43 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Texas pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a wood & vinyl fence cost in Texas?
Based on current Texas labor rates and material prices, a typical wood & vinyl fence costs about $6,414. Most projects fall between $5,644 and $7,376, or roughly $43 per linear foot. This example assumes: length 150 ft, height 6 ft, material Pressure-treated pine, posts 21.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 75 ft | $3,719 |
| 150 ft | $6,414 |
| 300 ft | $11,900 |
Where the money goes
- Rails & panels$3,074 (62%)
- Posts & footings$1,214 (25%)
- Gates$344 (7%)
- Permit & utility locate$308 (6%)
Materials $2,642 · Labor $2,170 (54 hours) · Equipment, disposal & permits $128 — before contingency, contractor overhead & profit and tax.
Texas vs. United States average
A typical wood & vinyl fence in Texas costs 9% less than the United States average ($6,414 vs. $7,078). The difference comes mainly from local wages — a carpenter earns on average $24.51 per hour in Texas — and from regional material prices and Sales tax (materials) of 6.25%.
Wood & Vinyl Fence in Texas: local factors
Texas ranks 44th of 51 states for wood & vinyl fence cost (1 = most expensive) — among the most affordable.
| Nearby state | Typical cost | vs. Texas |
|---|---|---|
| Texas | $6,414 | — |
| Arkansas | $6,065 | -5% |
| Louisiana | $6,400 | -0% |
| New Mexico | $6,473 | +1% |
| Oklahoma | $6,308 | -2% |
What affects the price in Texas
- Hurricane-force winds: Fences must resist high winds: deeper concrete-set posts, closer post spacing or reinforced masonry.
- Termites: Use pressure-treated or naturally resistant lumber and keep wood off the soil; new homes need a termite treatment or physical barrier.
Permits & contractor licensing in Texas
- Contractor license: Texas has no statewide license for general or remodeling contractors. Plumbers are licensed by the Texas State Board of Plumbing Examiners, and electricians and HVAC contractors by the Texas Department of Licensing and Regulation (TDLR).
- Building code: Cities enforce the International Residential Code (the edition varies by city). Unincorporated county areas have few building rules, so check what applies at your address.
- Permits: Permits are issued by the city. In the 14 coastal counties, windstorm certification from the Texas Department of Insurance is needed to keep TWIA wind coverage.
Verify a contractor: Texas Department of Licensing and Regulation (TDLR) ↗. Rules change — always confirm with your local building department.
Labor rates for this project in Texas
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Fence erector | 54 | $20.04 | $40.08 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a wood & vinyl fence includes
Fence cost is driven by length, height, material and gates. Posts set in concrete every 8 ft, rails and pickets or panels make up the materials; labor is mostly digging and setting posts.
Main cost factors
- Fence length and height
- Material (pine, cedar, vinyl)
- Style
- Number of gates
- Old fence removal
How to save money
- Pressure-treated pine is the cheapest; cedar resists rot naturally.
- Vinyl costs more up front but never needs staining.
- Share the cost with neighbors on property-line fences.
- Call your utility locate service before digging.
Timeline
2–4 days for 150 ft.
Permits
Many cities require a permit for fences over 6 ft; HOAs may have style rules.
Frequently asked questions
How much does a wood & vinyl fence cost in Texas?
A typical wood & vinyl fence in Texas costs about $6,414, with most projects between $5,644 and $7,376. That is about $43 per linear foot.
How much of the cost is labor?
Labor is about 44% of the direct cost (54 work hours) for a typical project in Texas. Materials are $2,642 and equipment, disposal and permits $128, before contingency, contractor overhead and tax.
Is a wood & vinyl fence cheaper in Texas than in nearby states?
A typical wood & vinyl fence costs $6,414 in Texas. Among nearby states, Arkansas is the lowest at $6,065 and New Mexico the highest at $6,473. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Texas?
Texas has no statewide license for general or remodeling contractors. Plumbers are licensed by the Texas State Board of Plumbing Examiners, and electricians and HVAC contractors by the Texas Department of Licensing and Regulation (TDLR).
What local conditions affect wood & vinyl fence costs in Texas?
Fences must resist high winds: deeper concrete-set posts, closer post spacing or reinforced masonry. Use pressure-treated or naturally resistant lumber and keep wood off the soil; new homes need a termite treatment or physical barrier.
How long does a wood & vinyl fence take?
2–4 days for 150 ft.
Do I need a permit for a wood & vinyl fence?
Many cities require a permit for fences over 6 ft; HOAs may have style rules.
How much does a fence cost per foot?
See the cost per linear foot (or metre) under the total.
How long does a wood fence last?
10–15 years for treated pine, 15–20 for cedar with regular sealing.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Wood & Vinyl Fence cost in other states
Compare wood & vinyl fence costs in every state, province and territory →