Concrete Driveway & Slab Cost Calculator — Texas
Average concrete driveway & slab cost in Texas: $9,914 (typical range $8,724–$11,401, $12 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Texas pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a concrete driveway & slab cost in Texas?
Based on current Texas labor rates and material prices, a typical concrete driveway & slab costs about $9,914. Most projects fall between $8,724 and $11,401, or roughly $12 per sq ft. This example assumes: size 40 ft × 20 ft, area 800 sq ft, concrete 10.5 cu yd, thickness 4".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 20 × 10 ft | $3,127 |
| 24 × 24 ft | $7,601 |
| 40 × 20 ft | $9,914 |
| 50 × 24 ft | $14,592 |
Where the money goes
- Concrete$5,053 (66%)
- Base & forms$2,433 (32%)
- Permit$160 (2%)
Materials $3,875 · Labor $2,999 (66 hours) · Equipment, disposal & permits $771 — before contingency, contractor overhead & profit and tax.
Texas vs. United States average
A typical concrete driveway & slab in Texas costs 9% less than the United States average ($9,914 vs. $10,880). The difference comes mainly from local wages — a carpenter earns on average $24.51 per hour in Texas — and from regional material prices and Sales tax (materials) of 6.25%.
Concrete Driveway & Slab in Texas: local factors
Texas ranks 45th of 51 states for concrete driveway & slab cost (1 = most expensive) — among the most affordable.
| Nearby state | Typical cost | vs. Texas |
|---|---|---|
| Texas | $9,914 | — |
| Arkansas | $9,506 | -4% |
| Louisiana | $10,094 | +2% |
| New Mexico | $10,128 | +2% |
| Oklahoma | $9,628 | -3% |
What affects the price in Texas
- Expansive / reactive clay soils: Expansive clay soil swells and shrinks with moisture: expect more rebar, a thicker or post-tensioned slab, and good drainage.
Permits & contractor licensing in Texas
- Contractor license: Texas has no statewide license for general or remodeling contractors. Plumbers are licensed by the Texas State Board of Plumbing Examiners, and electricians and HVAC contractors by the Texas Department of Licensing and Regulation (TDLR).
- Building code: Cities enforce the International Residential Code (the edition varies by city). Unincorporated county areas have few building rules, so check what applies at your address.
- Permits: Permits are issued by the city. In the 14 coastal counties, windstorm certification from the Texas Department of Insurance is needed to keep TWIA wind coverage.
Verify a contractor: Texas Department of Licensing and Regulation (TDLR) ↗. Rules change — always confirm with your local building department.
Labor rates for this project in Texas
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Cement mason / concrete finisher | 42 | $23.69 | $47.38 |
| Construction laborer | 24 | $20.63 | $41.26 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a concrete driveway & slab includes
Concrete flatwork costs depend on area, thickness, reinforcement and finish. A compacted gravel base, forms, ready-mix delivery and finishing labor are included; stamped and colored finishes add materials and time.
Main cost factors
- Area and thickness
- Reinforcement
- Decorative finish
- Removing old concrete
- Access for the truck
How to save money
- 5–6 inches thickness for driveways with heavy vehicles.
- Small pours under ~8 cubic yards pay a short-load fee — combine projects.
- Seal the concrete after curing to prevent salt and stain damage.
- Control joints every 8–12 ft prevent random cracks.
Timeline
2–4 days, plus 7 days before driving on it.
Permits
Driveway and curb-cut permits are common; check before pouring.
Frequently asked questions
How much does a concrete driveway & slab cost in Texas?
A typical concrete driveway & slab in Texas costs about $9,914, with most projects between $8,724 and $11,401. That is about $12 per sq ft.
How much of the cost is labor?
Labor is about 39% of the direct cost (66 work hours) for a typical project in Texas. Materials are $3,875 and equipment, disposal and permits $771, before contingency, contractor overhead and tax.
Is a concrete driveway & slab cheaper in Texas than in nearby states?
A typical concrete driveway & slab costs $9,914 in Texas. Among nearby states, Arkansas is the lowest at $9,506 and New Mexico the highest at $10,128. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Texas?
Texas has no statewide license for general or remodeling contractors. Plumbers are licensed by the Texas State Board of Plumbing Examiners, and electricians and HVAC contractors by the Texas Department of Licensing and Regulation (TDLR).
What local conditions affect concrete driveway & slab costs in Texas?
Expansive clay soil swells and shrinks with moisture: expect more rebar, a thicker or post-tensioned slab, and good drainage.
How long does a concrete driveway & slab take?
2–4 days, plus 7 days before driving on it.
Do I need a permit for a concrete driveway & slab?
Driveway and curb-cut permits are common; check before pouring.
How many cubic yards do I need?
The breakdown shows the volume for your size and thickness with 6% extra.
Concrete or pavers?
Concrete is cheaper per square foot; pavers are easier to repair.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Concrete Driveway & Slab cost in other states
Compare concrete driveway & slab costs in every state, province and territory →