Whole-Home Renovation Cost Calculator — Texas

Average whole-home renovation cost in Texas: $94,778 (typical range $83,405–$108,995, $86 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

How much does a whole-home renovation cost in Texas?

Based on current Texas labor rates and material prices, a typical whole-home renovation costs about $94,778. Most projects fall between $83,405 and $108,995, or roughly $86 per sq ft. This example assumes: floor area 1,100 sq ft, rooms 4, bathrooms 2, condition Bare shell (new build, nothing inside).

Cost by finish level

Finish levelEstimated costTypical range
Economy (budget)$77,223$67,956 – $88,806
Standard (mid-range)$94,778$83,405 – $108,995
Premium (high-end)$137,799$121,263 – $158,469

Cost by project size

Project sizeEstimated cost
600 sq ft, 2 rooms, 1 bathrooms$57,642
1,100 sq ft, 4 rooms, 2 bathrooms$94,778
2,000 sq ft, 6 rooms, 3 bathrooms$146,469

Where the money goes

  • Bathroom & kitchen fixtures$16,667 (23%)
  • Wall plastering & floor screed$8,657 (12%)
  • Partition walls$7,623 (10%)
  • Tile$7,214 (10%)
  • Electrical wiring$5,068 (7%)
  • Painting$5,042 (7%)
  • Electrical fixtures & lighting$4,367 (6%)
  • Flooring$4,078 (6%)

Materials $38,266 · Labor $30,708 (604 hours) · Equipment, disposal & permits $4,059 — before contingency, contractor overhead & profit and tax.

Texas vs. United States average

A typical whole-home renovation in Texas costs 10% less than the United States average ($94,778 vs. $104,819). The difference comes mainly from local wages — a carpenter earns on average $24.51 per hour in Texas — and from regional material prices and Sales tax (materials) of 6.25%.

Whole-Home Renovation in Texas: local factors

Texas ranks 44th of 51 states for whole-home renovation cost (1 = most expensive) — among the most affordable.

Nearby stateTypical costvs. Texas
Texas$94,778—
Arkansas$89,643-5%
Louisiana$94,627-0%
New Mexico$95,629+1%
Oklahoma$93,390-1%

Permits & contractor licensing in Texas

  • Contractor license: Texas has no statewide license for general or remodeling contractors. Plumbers are licensed by the Texas State Board of Plumbing Examiners, and electricians and HVAC contractors by the Texas Department of Licensing and Regulation (TDLR).
  • Building code: Cities enforce the International Residential Code (the edition varies by city). Unincorporated county areas have few building rules, so check what applies at your address.
  • Permits: Permits are issued by the city. In the 14 coastal counties, windstorm certification from the Texas Department of Insurance is needed to keep TWIA wind coverage.

Verify a contractor: Texas Department of Licensing and Regulation (TDLR) ↗. Rules change — always confirm with your local building department.

Labor rates for this project in Texas

TradeHoursAvg. wage / hourInstalled rate / hour
Brick / block mason99$26.03$52.06
Electrician98$28.50$57.00
Drywall installer94$23.58$47.16
Tile & stone setter83$24.53$49.06
Painter80$22.13$44.26
Plumber67$29.22$58.44
Carpenter39$24.51$49.02
Floor layer22$24.49$48.98
Cement mason / concrete finisher22$23.69$47.38
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a whole-home renovation includes

A whole-home renovation covers everything inside: walls, electrical and plumbing rough-in, heating, plaster, screed, drywall, waterproofing, tile, paint, flooring, doors, lighting and bathroom fixtures. Starting from a bare shell costs the most; a cosmetic refresh the least.

Main cost factors

  • Floor area and number of rooms
  • Starting condition (shell, dated, good)
  • Number of bathrooms
  • Finish package
  • Electrical, plumbing and heating scope

How to save money

  • Finish all “wet” work (plaster, screed, tile) before flooring and paint.
  • Buy tile, flooring and doors early — delivery delays stop the whole job.
  • Keep 10% of the budget for surprises behind walls.
  • Electrical and plumbing points are cheaper to add before plastering than later.

Timeline

2–4 months for a 1,000–1,500 sq ft home or apartment.

Permits

Electrical, plumbing and any wall changes need permits; cosmetic work usually does not.

Frequently asked questions

How much does a whole-home renovation cost in Texas?

A typical whole-home renovation in Texas costs about $94,778, with most projects between $83,405 and $108,995. Economy finishes start around $77,223 and premium projects reach $137,799. That is about $86 per sq ft.

How much of the cost is labor?

Labor is about 42% of the direct cost (604 work hours) for a typical project in Texas. Materials are $38,266 and equipment, disposal and permits $4,059, before contingency, contractor overhead and tax.

Is a whole-home renovation cheaper in Texas than in nearby states?

A typical whole-home renovation costs $94,778 in Texas. Among nearby states, Arkansas is the lowest at $89,643 and New Mexico the highest at $95,629. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Texas?

Texas has no statewide license for general or remodeling contractors. Plumbers are licensed by the Texas State Board of Plumbing Examiners, and electricians and HVAC contractors by the Texas Department of Licensing and Regulation (TDLR).

How long does a whole-home renovation take?

2–4 months for a 1,000–1,500 sq ft home or apartment.

Do I need a permit for a whole-home renovation?

Electrical, plumbing and any wall changes need permits; cosmetic work usually does not.

How much does it cost to renovate per square foot?

See the cost per square foot under the total. It depends mostly on the starting condition and finish package.

What should I renovate first?

Infrastructure first (wiring, plumbing, heating, windows), then walls and floors, then finishes and fixtures.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Whole-Home Renovation cost in other states

Compare whole-home renovation costs in every state, province and territory →

More cost calculators for Texas

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming