Wood & Vinyl Fence Cost Calculator — Queensland
Average wood & vinyl fence cost in Queensland: A$11,600 (typical range A$10,208–A$13,340, A$254 per metre). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Queensland pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a wood & vinyl fence cost in Queensland?
Based on current Queensland labor rates and material prices, a typical wood & vinyl fence costs about A$11,600. Most projects fall between A$10,208 and A$13,340, or roughly A$254 per metre. This example assumes: length 45.7 m, height 1.8 m, material Pressure-treated pine, posts 21.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 23 m | A$6,713 |
| 46 m | A$11,600 |
| 91 m | A$21,541 |
Where the money goes
- Rails & panelsA$5,163 (62%)
- Posts & footingsA$2,061 (25%)
- Permit & utility locateA$559 (7%)
- GatesA$554 (7%)
Materials A$3,461 · Labor A$4,708 (54 hours) · Equipment, disposal & permits A$167 — before contingency, contractor overhead & profit and tax.
Queensland vs. Australia average
A typical wood & vinyl fence in Queensland costs 2% less than the Australia average (A$11,600 vs. A$11,842). The difference comes mainly from local wages — a carpenter earns on average A$51.14 per hour in Queensland — and from regional material prices and GST of 10%.
Wood & Vinyl Fence in Queensland: local factors
Queensland ranks 6th of 8 states and territories for wood & vinyl fence cost (1 = most expensive) — among the most affordable.
| Nearby region | Typical cost | vs. Queensland |
|---|---|---|
| Queensland | A$11,600 | — |
| New South Wales | A$11,971 | +3% |
| Northern Territory | A$12,272 | +6% |
| South Australia | A$11,327 | -2% |
What affects the price in Queensland
- Bushfire-prone areas: Your block’s BAL rating (AS 3959) sets the required materials: BAL-29 and above need ember screens, toughened glass and non-combustible cladding/decking.
- Termites: Use pressure-treated or naturally resistant lumber and keep wood off the soil; new homes need a termite treatment or physical barrier.
Permits & contractor licensing in Queensland
- Contractor license: Builders and trades must be licensed or registered in Queensland, and most states require home warranty insurance above a contract value.
- Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
- Permits: Building approval comes from your council or a private building certifier.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Queensland
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Fence erector | 54 | A$43.47 | A$86.94 |
- Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
- Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.
What a wood & vinyl fence includes
Fence cost is driven by length, height, material and gates. Posts set in concrete every 8 ft, rails and pickets or panels make up the materials; labor is mostly digging and setting posts.
Main cost factors
- Fence length and height
- Material (pine, cedar, vinyl)
- Style
- Number of gates
- Old fence removal
How to save money
- Pressure-treated pine is the cheapest; cedar resists rot naturally.
- Vinyl costs more up front but never needs staining.
- Share the cost with neighbors on property-line fences.
- Call your utility locate service before digging.
Timeline
2–4 days for 150 ft.
Permits
Many cities require a permit for fences over 6 ft; HOAs may have style rules.
Frequently asked questions
How much does a wood & vinyl fence cost in Queensland?
A typical wood & vinyl fence in Queensland costs about A$11,600, with most projects between A$10,208 and A$13,340. That is about A$254 per metre.
How much of the cost is labor?
Labor is about 56% of the direct cost (54 work hours) for a typical project in Queensland. Materials are A$3,461 and equipment, disposal and permits A$167, before contingency, contractor overhead and tax.
Is a wood & vinyl fence cheaper in Queensland than in nearby regions?
A typical wood & vinyl fence costs A$11,600 in Queensland. Among nearby regions, South Australia is the lowest at A$11,327 and Northern Territory the highest at A$12,272. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Queensland?
Builders and trades must be licensed or registered in Queensland, and most states require home warranty insurance above a contract value.
What local conditions affect wood & vinyl fence costs in Queensland?
Your block’s BAL rating (AS 3959) sets the required materials: BAL-29 and above need ember screens, toughened glass and non-combustible cladding/decking. Use pressure-treated or naturally resistant lumber and keep wood off the soil; new homes need a termite treatment or physical barrier.
How long does a wood & vinyl fence take?
2–4 days for 150 ft.
Do I need a permit for a wood & vinyl fence?
Many cities require a permit for fences over 6 ft; HOAs may have style rules.
How much does a fence cost per foot?
See the cost per linear foot (or metre) under the total.
How long does a wood fence last?
10–15 years for treated pine, 15–20 for cedar with regular sealing.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Wood & Vinyl Fence cost in other states
Compare wood & vinyl fence costs in every state, province and territory →