Concrete Driveway & Slab Cost Calculator — South Australia
Average concrete driveway & slab cost in South Australia: A$16,740 (typical range A$14,731–A$19,251, A$225 per m²). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from South Australia pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a concrete driveway & slab cost in South Australia?
Based on current South Australia labor rates and material prices, a typical concrete driveway & slab costs about A$16,740. Most projects fall between A$14,731 and A$19,251, or roughly A$225 per m². This example assumes: size 12.2 m × 6.1 m, area 74 m², concrete 8.0 m³, thickness 4".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 6.1 × 3 m | A$5,106 |
| 7.3 × 7.3 m | A$12,712 |
| 12 × 6.1 m | A$16,740 |
| 15 × 7.3 m | A$24,719 |
Where the money goes
- ConcreteA$8,054 (67%)
- Base & formsA$3,769 (31%)
- PermitA$207 (2%)
Materials A$5,028 · Labor A$6,002 (66 hours) · Equipment, disposal & permits A$1,001 — before contingency, contractor overhead & profit and tax.
South Australia vs. Australia average
A typical concrete driveway & slab in South Australia costs 4% less than the Australia average (A$16,740 vs. A$17,473). The difference comes mainly from local wages — a carpenter earns on average A$49.40 per hour in South Australia — and from regional material prices and GST of 10%.
Concrete Driveway & Slab in South Australia: local factors
South Australia ranks 7th of 8 states and territories for concrete driveway & slab cost (1 = most expensive) — among the most affordable.
| Nearby region | Typical cost | vs. South Australia |
|---|---|---|
| South Australia | A$16,740 | — |
| Western Australia | A$18,418 | +10% |
| Northern Territory | A$18,309 | +9% |
| Queensland | A$17,119 | +2% |
| New South Wales | A$17,663 | +6% |
| Victoria | A$17,209 | +3% |
What affects the price in South Australia
- Expansive / reactive clay soils: Expansive clay soil swells and shrinks with moisture: expect more rebar, a thicker or post-tensioned slab, and good drainage.
Permits & contractor licensing in South Australia
- Contractor license: Builders and trades must be licensed or registered in South Australia, and most states require home warranty insurance above a contract value.
- Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
- Permits: Building approval comes from your council or a private building certifier.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in South Australia
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Cement mason / concrete finisher | 42 | A$48.41 | A$96.82 |
| Construction laborer | 24 | A$39.52 | A$79.04 |
- Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
- Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.
What a concrete driveway & slab includes
Concrete flatwork costs depend on area, thickness, reinforcement and finish. A compacted gravel base, forms, ready-mix delivery and finishing labor are included; stamped and colored finishes add materials and time.
Main cost factors
- Area and thickness
- Reinforcement
- Decorative finish
- Removing old concrete
- Access for the truck
How to save money
- 5–6 inches thickness for driveways with heavy vehicles.
- Small pours under ~8 cubic yards pay a short-load fee — combine projects.
- Seal the concrete after curing to prevent salt and stain damage.
- Control joints every 8–12 ft prevent random cracks.
Timeline
2–4 days, plus 7 days before driving on it.
Permits
Driveway and curb-cut permits are common; check before pouring.
Frequently asked questions
How much does a concrete driveway & slab cost in South Australia?
A typical concrete driveway & slab in South Australia costs about A$16,740, with most projects between A$14,731 and A$19,251. That is about A$225 per m².
How much of the cost is labor?
Labor is about 50% of the direct cost (66 work hours) for a typical project in South Australia. Materials are A$5,028 and equipment, disposal and permits A$1,001, before contingency, contractor overhead and tax.
Is a concrete driveway & slab cheaper in South Australia than in nearby regions?
A typical concrete driveway & slab costs A$16,740 in South Australia. Among nearby regions, Queensland is the lowest at A$17,119 and Western Australia the highest at A$18,418. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in South Australia?
Builders and trades must be licensed or registered in South Australia, and most states require home warranty insurance above a contract value.
What local conditions affect concrete driveway & slab costs in South Australia?
Expansive clay soil swells and shrinks with moisture: expect more rebar, a thicker or post-tensioned slab, and good drainage.
How long does a concrete driveway & slab take?
2–4 days, plus 7 days before driving on it.
Do I need a permit for a concrete driveway & slab?
Driveway and curb-cut permits are common; check before pouring.
How many cubic yards do I need?
The breakdown shows the volume for your size and thickness with 6% extra.
Concrete or pavers?
Concrete is cheaper per square foot; pavers are easier to repair.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Concrete Driveway & Slab cost in other states
Compare concrete driveway & slab costs in every state, province and territory →