Swimming Pool Cost Calculator — South Australia

Average swimming pool cost in South Australia: A$134,034 (typical range A$117,950–A$154,139, A$2,818 per m² of water surface). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from South Australia pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a swimming pool cost in South Australia?

Based on current South Australia labor rates and material prices, a typical swimming pool costs about A$134,034. Most projects fall between A$117,950 and A$154,139, or roughly A$2,818 per m² of water surface. This example assumes: pool size 9.8 m × 4.9 m, water surface 48 m², volume 72,479 L, type Concrete / gunite.

Cost by project size

Project sizeEstimated cost
7.3 × 3.7 mA$108,375
9.8 × 4.9 mA$134,034
12 × 6.1 mA$163,368

Where the money goes

  • Pool structureA$48,224 (50%)
  • Design, permits & excavationA$15,065 (16%)
  • Plumbing & equipmentA$11,131 (12%)
  • Safety fence & gateA$8,290 (9%)
  • Pool deckA$7,586 (8%)
  • ElectricalA$4,249 (4%)
  • Start-upA$1,778 (2%)

Materials A$49,301 · Labor A$33,717 (340 hours) · Equipment, disposal & permits A$13,305 — before contingency, contractor overhead & profit and tax.

South Australia vs. Australia average

A typical swimming pool in South Australia costs 4% less than the Australia average (A$134,034 vs. A$139,351). The difference comes mainly from local wages — a carpenter earns on average A$49.40 per hour in South Australia — and from regional material prices and GST of 10%.

Swimming Pool in South Australia: local factors

South Australia ranks 8th of 8 states and territories for swimming pool cost (1 = most expensive) — among the most affordable.

Nearby regionTypical costvs. South Australia
South AustraliaA$134,034—
Western AustraliaA$146,258+9%
Northern TerritoryA$150,043+12%
QueenslandA$136,562+2%
New South WalesA$140,815+5%
VictoriaA$137,467+3%

What affects the price in South Australia

  • Hot summers: A long swim season makes pools popular; plan for shade, a variable-speed pump and evaporation.
  • Expansive / reactive clay soils: Expansive clay soil swells and shrinks with moisture: expect more rebar, a thicker or post-tensioned slab, and good drainage.

Permits & contractor licensing in South Australia

  • Contractor license: Builders and trades must be licensed or registered in South Australia, and most states require home warranty insurance above a contract value.
  • Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
  • Permits: Building approval comes from your council or a private building certifier.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in South Australia

TradeHoursAvg. wage / hourInstalled rate / hour
Cement mason / concrete finisher114A$48.41A$96.82
Brick / block mason58A$50.39A$100.78
Ironworker / welder40A$54.34A$108.68
Construction laborer32A$39.52A$79.04
Plumber32A$56.31A$112.62
Fence erector26A$41.99A$83.98
Equipment operator22A$53.35A$106.70
Electrician16A$57.30A$114.60
  • Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a swimming pool includes

An in-ground pool includes design and permits, excavation and haul-off, the pool structure, plumbing and equipment, electrical bonding, coping and tile, a deck and a code-compliant safety fence. Concrete pools are the most flexible and most expensive; fiberglass is fastest to install.

Main cost factors

  • Pool type and size
  • Depth and shape
  • Heater and automation
  • Deck area and material
  • Safety fencing

How to save money

  • A simple rectangle costs less than a freeform shape with many curves.
  • A variable-speed pump pays for itself in lower electricity bills.
  • A heat pump is cheaper to run than a gas heater in warm climates.
  • Budget for fencing, landscaping and higher insurance.

Timeline

6–12 weeks for concrete; 3–5 weeks for fiberglass.

Permits

A pool permit, electrical permit and a compliant barrier/fence are required almost everywhere.

Frequently asked questions

How much does a swimming pool cost in South Australia?

A typical swimming pool in South Australia costs about A$134,034, with most projects between A$117,950 and A$154,139. That is about A$2,818 per m² of water surface.

How much of the cost is labor?

Labor is about 35% of the direct cost (340 work hours) for a typical project in South Australia. Materials are A$49,301 and equipment, disposal and permits A$13,305, before contingency, contractor overhead and tax.

Is a swimming pool cheaper in South Australia than in nearby regions?

A typical swimming pool costs A$134,034 in South Australia. Among nearby regions, Queensland is the lowest at A$136,562 and Northern Territory the highest at A$150,043. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in South Australia?

Builders and trades must be licensed or registered in South Australia, and most states require home warranty insurance above a contract value.

What local conditions affect swimming pool costs in South Australia?

A long swim season makes pools popular; plan for shade, a variable-speed pump and evaporation. Expansive clay soil swells and shrinks with moisture: expect more rebar, a thicker or post-tensioned slab, and good drainage.

How long does a swimming pool take?

6–12 weeks for concrete; 3–5 weeks for fiberglass.

Do I need a permit for a swimming pool?

A pool permit, electrical permit and a compliant barrier/fence are required almost everywhere.

Concrete, vinyl or fiberglass — which is cheapest?

Vinyl liner pools usually have the lowest upfront cost, concrete the highest. Switch the pool type in the calculator to compare.

What does a pool cost to maintain?

Plan for chemicals, electricity, and periodic resurfacing or liner replacement.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Swimming Pool cost in other states

Compare swimming pool costs in every state, province and territory →

More cost calculators for South Australia

Choose your location

NSW New South WalesVIC VictoriaQLD QueenslandSA South AustraliaWA Western AustraliaTAS TasmaniaNT Northern TerritoryACT Australian Capital Territory