Electrical Rewiring & Panel Cost Calculator — South Australia
Average electrical rewiring & panel cost in South Australia: A$47,560 (typical range A$41,853–A$54,694, A$284 per m²). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from South Australia pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a electrical rewiring & panel cost in South Australia?
Based on current South Australia labor rates and material prices, a typical electrical rewiring & panel costs about A$47,560. Most projects fall between A$41,853 and A$54,694, or roughly A$284 per m². This example assumes: home size 167 m², scope Full rewire, panel 200 A, ev charger No.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 84 m² | A$27,718 |
| 167 m² | A$47,560 |
| 334 m² | A$87,243 |
Where the money goes
- RewiringA$21,694 (63%)
- Wall repairA$6,406 (19%)
- Service & panelA$4,365 (13%)
- ExtrasA$1,308 (4%)
- Permit & inspectionA$406 (1%)
Materials A$8,333 · Labor A$25,164 (230 hours) · Equipment, disposal & permits A$682 — before contingency, contractor overhead & profit and tax.
South Australia vs. Australia average
A typical electrical rewiring & panel in South Australia costs 5% less than the Australia average (A$47,560 vs. A$49,952). The difference comes mainly from local wages — a carpenter earns on average A$49.40 per hour in South Australia — and from regional material prices and GST of 10%.
Electrical Rewiring & Panel in South Australia: local factors
South Australia ranks 7th of 8 states and territories for electrical rewiring & panel cost (1 = most expensive) — among the most affordable.
| Nearby region | Typical cost | vs. South Australia |
|---|---|---|
| South Australia | A$47,560 | — |
| Western Australia | A$53,014 | +11% |
| Northern Territory | A$50,067 | +5% |
| Queensland | A$48,925 | +3% |
| New South Wales | A$50,524 | +6% |
| Victoria | A$49,075 | +3% |
Permits & contractor licensing in South Australia
- Contractor license: Builders and trades must be licensed or registered in South Australia, and most states require home warranty insurance above a contract value.
- Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
- Permits: Building approval comes from your council or a private building certifier.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in South Australia
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Electrician | 171 | A$57.30 | A$114.60 |
| Drywall installer | 60 | A$46.93 | A$93.86 |
- Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
- Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.
What a electrical rewiring & panel includes
Rewiring includes a new panel and service, new circuits fished through walls, outlets, switches and detectors, plus patching the access holes. Plaster walls take longer than drywall.
Main cost factors
- Home size
- Panel size
- Full or partial rewire
- Wall repair after rewiring
- EV charger
How to save money
- Upgrade to a 200 A panel if you plan an EV charger, heat pump or induction cooking.
- Do rewiring before painting and flooring.
- Add outlets and USB-C receptacles while walls are open.
- Whole-home surge protection is inexpensive insurance.
Timeline
3–10 days for a full rewire.
Permits
Electrical permits and inspections are always required; utility coordination is needed for service upgrades.
Frequently asked questions
How much does a electrical rewiring & panel cost in South Australia?
A typical electrical rewiring & panel in South Australia costs about A$47,560, with most projects between A$41,853 and A$54,694. That is about A$284 per m².
How much of the cost is labor?
Labor is about 74% of the direct cost (230 work hours) for a typical project in South Australia. Materials are A$8,333 and equipment, disposal and permits A$682, before contingency, contractor overhead and tax.
Is a electrical rewiring & panel cheaper in South Australia than in nearby regions?
A typical electrical rewiring & panel costs A$47,560 in South Australia. Among nearby regions, Queensland is the lowest at A$48,925 and Western Australia the highest at A$53,014. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in South Australia?
Builders and trades must be licensed or registered in South Australia, and most states require home warranty insurance above a contract value.
How long does a electrical rewiring & panel take?
3–10 days for a full rewire.
Do I need a permit for a electrical rewiring & panel?
Electrical permits and inspections are always required; utility coordination is needed for service upgrades.
Do I need to rewire an old house?
Homes with knob-and-tube, aluminum branch wiring or a fuse box are strong candidates.
How much does a panel upgrade cost?
Choose “Panel upgrade only” to see just the panel and service cost.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Electrical Rewiring & Panel cost in other states
Compare electrical rewiring & panel costs in every state, province and territory →