Paver Patio Cost Calculator — South Australia
Average paver patio cost in South Australia: A$10,145 (typical range A$8,928–A$11,667, A$364 per m²). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from South Australia pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a paver patio cost in South Australia?
Based on current South Australia labor rates and material prices, a typical paver patio costs about A$10,145. Most projects fall between A$8,928 and A$11,667, or roughly A$364 per m². This example assumes: patio area 28 m², paver Concrete pavers, base 6".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 14 m² | A$5,624 |
| 28 m² | A$10,145 |
| 56 m² | A$19,793 |
Where the money goes
- PaversA$4,104 (56%)
- ExcavationA$1,642 (23%)
- BaseA$1,544 (21%)
Materials A$2,909 · Labor A$3,201 (41 hours) · Equipment, disposal & permits A$1,180 — before contingency, contractor overhead & profit and tax.
South Australia vs. Australia average
A typical paver patio in South Australia costs 4% less than the Australia average (A$10,145 vs. A$10,572). The difference comes mainly from local wages — a carpenter earns on average A$49.40 per hour in South Australia — and from regional material prices and GST of 10%.
Paver Patio in South Australia: local factors
South Australia ranks 8th of 8 states and territories for paver patio cost (1 = most expensive) — among the most affordable.
| Nearby region | Typical cost | vs. South Australia |
|---|---|---|
| South Australia | A$10,145 | — |
| Western Australia | A$11,125 | +10% |
| Northern Territory | A$11,200 | +10% |
| Queensland | A$10,358 | +2% |
| New South Wales | A$10,686 | +5% |
| Victoria | A$10,419 | +3% |
What affects the price in South Australia
- Expansive / reactive clay soils: Expansive clay soil swells and shrinks with moisture: expect more rebar, a thicker or post-tensioned slab, and good drainage.
Permits & contractor licensing in South Australia
- Contractor license: Builders and trades must be licensed or registered in South Australia, and most states require home warranty insurance above a contract value.
- Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
- Permits: Building approval comes from your council or a private building certifier.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in South Australia
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Landscaper / hardscape | 41 | A$39.52 | A$79.04 |
- Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
- Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.
What a paver patio includes
A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.
Main cost factors
- Patio area
- Paver type
- Base depth
- Borders and edging
- Steps or seat walls
How to save money
- Do not skimp on base depth on clay soils.
- Simple running-bond patterns waste less paver material.
- Permeable pavers can reduce storm-water fees in some cities.
- Seat walls and steps add the most cost per square foot.
Timeline
2–5 days.
Permits
Usually not required for ground-level patios; check lot coverage rules.
Frequently asked questions
How much does a paver patio cost in South Australia?
A typical paver patio in South Australia costs about A$10,145, with most projects between A$8,928 and A$11,667. That is about A$364 per m².
How much of the cost is labor?
Labor is about 44% of the direct cost (41 work hours) for a typical project in South Australia. Materials are A$2,909 and equipment, disposal and permits A$1,180, before contingency, contractor overhead and tax.
Is a paver patio cheaper in South Australia than in nearby regions?
A typical paver patio costs A$10,145 in South Australia. Among nearby regions, Queensland is the lowest at A$10,358 and Northern Territory the highest at A$11,200. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in South Australia?
Builders and trades must be licensed or registered in South Australia, and most states require home warranty insurance above a contract value.
What local conditions affect paver patio costs in South Australia?
Expansive clay soil swells and shrinks with moisture: expect more rebar, a thicker or post-tensioned slab, and good drainage.
How long does a paver patio take?
2–5 days.
Do I need a permit for a paver patio?
Usually not required for ground-level patios; check lot coverage rules.
How much base gravel do I need?
See the “Base” category for cubic yards for your base depth.
How long do paver patios last?
25–50 years with occasional re-sanding of joints.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Paver Patio cost in other states
Compare paver patio costs in every state, province and territory →