Electrical Rewiring & Panel Cost Calculator — District of Columbia
Average electrical rewiring & panel cost in District of Columbia: $33,953 (typical range $29,879–$39,046, $19 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from District of Columbia pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a electrical rewiring & panel cost in District of Columbia?
Based on current District of Columbia labor rates and material prices, a typical electrical rewiring & panel costs about $33,953. Most projects fall between $29,879 and $39,046, or roughly $19 per sq ft. This example assumes: home size 1,800 sq ft, scope Full rewire, panel 200 A, ev charger No.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 900 sq ft | $19,988 |
| 1,800 sq ft | $33,953 |
| 3,600 sq ft | $61,885 |
Where the money goes
- Rewiring$16,660 (63%)
- Wall repair$4,872 (18%)
- Service & panel$3,565 (13%)
- Extras$1,055 (4%)
- Permit & inspection$348 (1%)
Materials $7,151 · Labor $18,765 (230 hours) · Equipment, disposal & permits $585 — before contingency, contractor overhead & profit and tax.
District of Columbia vs. United States average
A typical electrical rewiring & panel in District of Columbia costs 18% more than the United States average ($33,953 vs. $28,860). The difference comes mainly from local wages — a carpenter earns on average $31.73 per hour in District of Columbia — and from regional material prices and Sales tax (materials) of 6%.
Electrical Rewiring & Panel in District of Columbia: local factors
District of Columbia ranks 7th of 51 states for electrical rewiring & panel cost (1 = most expensive) — among the most expensive.
| Nearby state | Typical cost | vs. District of Columbia |
|---|---|---|
| District of Columbia | $33,953 | — |
| Maryland | $29,414 | -13% |
| Virginia | $27,516 | -19% |
Permits & contractor licensing in District of Columbia
- Contractor license: Licensing rules in District of Columbia depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in District of Columbia are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in District of Columbia
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Electrician | 171 | $42.72 | $85.44 |
| Drywall installer | 60 | $35.02 | $70.04 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a electrical rewiring & panel includes
Rewiring includes a new panel and service, new circuits fished through walls, outlets, switches and detectors, plus patching the access holes. Plaster walls take longer than drywall.
Main cost factors
- Home size
- Panel size
- Full or partial rewire
- Wall repair after rewiring
- EV charger
How to save money
- Upgrade to a 200 A panel if you plan an EV charger, heat pump or induction cooking.
- Do rewiring before painting and flooring.
- Add outlets and USB-C receptacles while walls are open.
- Whole-home surge protection is inexpensive insurance.
Timeline
3–10 days for a full rewire.
Permits
Electrical permits and inspections are always required; utility coordination is needed for service upgrades.
Frequently asked questions
How much does a electrical rewiring & panel cost in District of Columbia?
A typical electrical rewiring & panel in District of Columbia costs about $33,953, with most projects between $29,879 and $39,046. That is about $19 per sq ft.
How much of the cost is labor?
Labor is about 71% of the direct cost (230 work hours) for a typical project in District of Columbia. Materials are $7,151 and equipment, disposal and permits $585, before contingency, contractor overhead and tax.
Is a electrical rewiring & panel cheaper in District of Columbia than in nearby states?
A typical electrical rewiring & panel costs $33,953 in District of Columbia. Among nearby states, Virginia is the lowest at $27,516 and Maryland the highest at $29,414. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in District of Columbia?
Licensing rules in District of Columbia depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
How long does a electrical rewiring & panel take?
3–10 days for a full rewire.
Do I need a permit for a electrical rewiring & panel?
Electrical permits and inspections are always required; utility coordination is needed for service upgrades.
Do I need to rewire an old house?
Homes with knob-and-tube, aluminum branch wiring or a fuse box are strong candidates.
How much does a panel upgrade cost?
Choose “Panel upgrade only” to see just the panel and service cost.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Electrical Rewiring & Panel cost in other states
Compare electrical rewiring & panel costs in every state, province and territory →