Concrete Driveway & Slab Cost Calculator — District of Columbia
Average concrete driveway & slab cost in District of Columbia: $11,643 (typical range $10,246–$13,389, $15 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from District of Columbia pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a concrete driveway & slab cost in District of Columbia?
Based on current District of Columbia labor rates and material prices, a typical concrete driveway & slab costs about $11,643. Most projects fall between $10,246 and $13,389, or roughly $15 per sq ft. This example assumes: size 40 ft × 20 ft, area 800 sq ft, concrete 10.5 cu yd, thickness 4".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 20 × 10 ft | $3,632 |
| 24 × 24 ft | $8,898 |
| 40 × 20 ft | $11,643 |
| 50 × 24 ft | $17,153 |
Where the money goes
- Concrete$6,010 (67%)
- Base & forms$2,812 (31%)
- Permit$178 (2%)
Materials $4,315 · Labor $3,826 (66 hours) · Equipment, disposal & permits $859 — before contingency, contractor overhead & profit and tax.
District of Columbia vs. United States average
A typical concrete driveway & slab in District of Columbia costs 7% more than the United States average ($11,643 vs. $10,880). The difference comes mainly from local wages — a carpenter earns on average $31.73 per hour in District of Columbia — and from regional material prices and Sales tax (materials) of 6%.
Concrete Driveway & Slab in District of Columbia: local factors
District of Columbia ranks 11th of 51 states for concrete driveway & slab cost (1 = most expensive) — among the most expensive.
| Nearby state | Typical cost | vs. District of Columbia |
|---|---|---|
| District of Columbia | $11,643 | — |
| Maryland | $10,703 | -8% |
| Virginia | $10,275 | -12% |
Permits & contractor licensing in District of Columbia
- Contractor license: Licensing rules in District of Columbia depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in District of Columbia are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in District of Columbia
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Cement mason / concrete finisher | 42 | $30.90 | $61.80 |
| Construction laborer | 24 | $25.11 | $50.22 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a concrete driveway & slab includes
Concrete flatwork costs depend on area, thickness, reinforcement and finish. A compacted gravel base, forms, ready-mix delivery and finishing labor are included; stamped and colored finishes add materials and time.
Main cost factors
- Area and thickness
- Reinforcement
- Decorative finish
- Removing old concrete
- Access for the truck
How to save money
- 5–6 inches thickness for driveways with heavy vehicles.
- Small pours under ~8 cubic yards pay a short-load fee — combine projects.
- Seal the concrete after curing to prevent salt and stain damage.
- Control joints every 8–12 ft prevent random cracks.
Timeline
2–4 days, plus 7 days before driving on it.
Permits
Driveway and curb-cut permits are common; check before pouring.
Frequently asked questions
How much does a concrete driveway & slab cost in District of Columbia?
A typical concrete driveway & slab in District of Columbia costs about $11,643, with most projects between $10,246 and $13,389. That is about $15 per sq ft.
How much of the cost is labor?
Labor is about 43% of the direct cost (66 work hours) for a typical project in District of Columbia. Materials are $4,315 and equipment, disposal and permits $859, before contingency, contractor overhead and tax.
Is a concrete driveway & slab cheaper in District of Columbia than in nearby states?
A typical concrete driveway & slab costs $11,643 in District of Columbia. Among nearby states, Virginia is the lowest at $10,275 and Maryland the highest at $10,703. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in District of Columbia?
Licensing rules in District of Columbia depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
How long does a concrete driveway & slab take?
2–4 days, plus 7 days before driving on it.
Do I need a permit for a concrete driveway & slab?
Driveway and curb-cut permits are common; check before pouring.
How many cubic yards do I need?
The breakdown shows the volume for your size and thickness with 6% extra.
Concrete or pavers?
Concrete is cheaper per square foot; pavers are easier to repair.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Concrete Driveway & Slab cost in other states
Compare concrete driveway & slab costs in every state, province and territory →