Block Wall Fence Cost Calculator — District of Columbia
Average block wall fence cost in District of Columbia: $23,352 (typical range $20,550–$26,855, $234 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from District of Columbia pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a block wall fence cost in District of Columbia?
Based on current District of Columbia labor rates and material prices, a typical block wall fence costs about $23,352. Most projects fall between $20,550 and $26,855, or roughly $234 per linear foot. This example assumes: length 100 ft, height 6 ft, blocks 709, face area 600 sq ft.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 50 ft | $13,550 |
| 100 ft | $23,352 |
| 200 ft | $43,490 |
Where the money goes
- Block wall$11,285 (62%)
- Excavation & footing$4,579 (25%)
- Gates$926 (5%)
- Permit & engineering$770 (4%)
- Cap & finish$575 (3%)
Materials $6,868 · Labor $9,508 (152 hours) · Equipment, disposal & permits $1,758 — before contingency, contractor overhead & profit and tax.
District of Columbia vs. United States average
A typical block wall fence in District of Columbia costs 8% more than the United States average ($23,352 vs. $21,702). The difference comes mainly from local wages — a carpenter earns on average $31.73 per hour in District of Columbia — and from regional material prices and Sales tax (materials) of 6%.
Block Wall Fence in District of Columbia: local factors
District of Columbia ranks 13th of 51 states for block wall fence cost (1 = most expensive) — among the most expensive.
| Nearby state | Typical cost | vs. District of Columbia |
|---|---|---|
| District of Columbia | $23,352 | — |
| Maryland | $20,649 | -12% |
| Virginia | $19,710 | -16% |
What affects the price in District of Columbia
- Moderate frost: Posts and footings typically go 24–42 in. (0.6–1.1 m) deep to stay below the frost line.
Permits & contractor licensing in District of Columbia
- Contractor license: Licensing rules in District of Columbia depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in District of Columbia are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in District of Columbia
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Brick / block mason | 75 | $36.26 | $72.52 |
| Construction laborer | 65 | $25.11 | $50.22 |
| Cement mason / concrete finisher | 8 | $30.90 | $61.80 |
| Ironworker / welder | 4 | $38.70 | $77.40 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a block wall fence includes
A concrete block (CMU) wall needs a reinforced footing, vertical rebar grouted into the cells, horizontal reinforcement, mortar and a cap. Stucco or paint finish adds cost and life. Walls over 4 ft often need engineering.
Main cost factors
- Wall length and height
- Block type
- Footing and rebar
- Pilasters and cap
- Stucco or paint finish
How to save money
- Closer rebar spacing is required in high-wind and seismic areas.
- Split-face block looks finished without stucco.
- Pilasters every 10–16 ft stiffen tall walls.
- Plan drainage behind walls that hold back soil.
Timeline
1–3 weeks depending on length.
Permits
Walls over 4 ft (or retaining walls) usually need a permit and engineered design.
Frequently asked questions
How much does a block wall fence cost in District of Columbia?
A typical block wall fence in District of Columbia costs about $23,352, with most projects between $20,550 and $26,855. That is about $234 per linear foot.
How much of the cost is labor?
Labor is about 52% of the direct cost (152 work hours) for a typical project in District of Columbia. Materials are $6,868 and equipment, disposal and permits $1,758, before contingency, contractor overhead and tax.
Is a block wall fence cheaper in District of Columbia than in nearby states?
A typical block wall fence costs $23,352 in District of Columbia. Among nearby states, Virginia is the lowest at $19,710 and Maryland the highest at $20,649. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in District of Columbia?
Licensing rules in District of Columbia depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
What local conditions affect block wall fence costs in District of Columbia?
Posts and footings typically go 24–42 in. (0.6–1.1 m) deep to stay below the frost line.
How long does a block wall fence take?
1–3 weeks depending on length.
Do I need a permit for a block wall fence?
Walls over 4 ft (or retaining walls) usually need a permit and engineered design.
How many blocks do I need?
The breakdown shows the block count (wall face area ÷ 0.89 sq ft per block + 5%).
Block wall or wood fence?
Block walls cost more but last 50+ years and block noise.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Block Wall Fence cost in other states
Compare block wall fence costs in every state, province and territory →