Drywall Installation Cost Calculator — Queensland

Average drywall installation cost in Queensland: A$9,594 (typical range A$8,443–A$11,033, A$65 per m² of board area). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

How much does a drywall installation cost in Queensland?

Based on current Queensland labor rates and material prices, a typical drywall installation costs about A$9,594. Most projects fall between A$8,443 and A$11,033, or roughly A$65 per m² of board area. This example assumes: wall area 111 m², ceiling area 37 m², sheets 56, finish Level 4.

Cost by project size

Project sizeEstimated cost
56 m², 19 m²A$4,801
111 m², 37 m²A$9,594
223 m², 74 m²A$19,045

Where the money goes

  • LaborA$5,074 (74%)
  • MaterialsA$1,821 (26%)

Materials A$1,821 · Labor A$5,074 (53 hours) · Equipment, disposal & permits A$0 — before contingency, contractor overhead & profit and tax.

Queensland vs. Australia average

A typical drywall installation in Queensland costs 2% less than the Australia average (A$9,594 vs. A$9,796). The difference comes mainly from local wages — a carpenter earns on average A$51.14 per hour in Queensland — and from regional material prices and GST of 10%.

Drywall Installation in Queensland: local factors

Queensland ranks 6th of 8 states and territories for drywall installation cost (1 = most expensive) — among the most affordable.

Nearby regionTypical costvs. Queensland
QueenslandA$9,594—
New South WalesA$9,908+3%
Northern TerritoryA$9,827+2%
South AustraliaA$9,328-3%

What affects the price in Queensland

  • Heat & humidity: Use moisture- and mold-resistant board and a properly sized exhaust fan; humidity control matters more than in dry climates.

Permits & contractor licensing in Queensland

  • Contractor license: Builders and trades must be licensed or registered in Queensland, and most states require home warranty insurance above a contract value.
  • Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
  • Permits: Building approval comes from your council or a private building certifier.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Queensland

TradeHoursAvg. wage / hourInstalled rate / hour
Drywall installer45A$48.59A$97.18
Painter8A$45.01A$90.02
  • Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a drywall installation includes

Drywall cost depends on the board area, board type, ceiling height and finish level. Level 4 is standard for flat paint; level 5 is for gloss paint and critical lighting.

Main cost factors

  • Wall and ceiling area
  • Board type
  • Finish level
  • Ceiling height

How to save money

  • Use moisture-resistant board in bathrooms and fire-rated board in garages.
  • Larger 4×12 sheets mean fewer seams on long walls.
  • Hire a separate finisher for high-visibility areas.
  • Prime with drywall primer before painting.

Timeline

3–7 days including drying time between coats.

Permits

Usually part of a larger remodel permit; fire-rated assemblies need inspection.

Frequently asked questions

How much does a drywall installation cost in Queensland?

A typical drywall installation in Queensland costs about A$9,594, with most projects between A$8,443 and A$11,033. That is about A$65 per m² of board area.

How much of the cost is labor?

Labor is about 74% of the direct cost (53 work hours) for a typical project in Queensland. Materials are A$1,821 and equipment, disposal and permits A$0, before contingency, contractor overhead and tax.

Is a drywall installation cheaper in Queensland than in nearby regions?

A typical drywall installation costs A$9,594 in Queensland. Among nearby regions, South Australia is the lowest at A$9,328 and New South Wales the highest at A$9,908. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Queensland?

Builders and trades must be licensed or registered in Queensland, and most states require home warranty insurance above a contract value.

What local conditions affect drywall installation costs in Queensland?

Use moisture- and mold-resistant board and a properly sized exhaust fan; humidity control matters more than in dry climates.

How long does a drywall installation take?

3–7 days including drying time between coats.

Do I need a permit for a drywall installation?

Usually part of a larger remodel permit; fire-rated assemblies need inspection.

How many drywall sheets do I need?

The breakdown shows the sheet count for your wall and ceiling area with 10% extra.

What is the cost per square foot to hang and finish drywall?

See the cost per square foot under the total.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Drywall Installation cost in other states

Compare drywall installation costs in every state, province and territory →

More cost calculators for Queensland

Choose your location

NSW New South WalesVIC VictoriaQLD QueenslandSA South AustraliaWA Western AustraliaTAS TasmaniaNT Northern TerritoryACT Australian Capital Territory