Drywall Installation Cost Calculator — New South Wales

Average drywall installation cost in New South Wales: A$9,908 (typical range A$8,719–A$11,394, A$67 per m² of board area). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from New South Wales pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a drywall installation cost in New South Wales?

Based on current New South Wales labor rates and material prices, a typical drywall installation costs about A$9,908. Most projects fall between A$8,719 and A$11,394, or roughly A$67 per m² of board area. This example assumes: wall area 111 m², ceiling area 37 m², sheets 56, finish Level 4.

Cost by project size

Project sizeEstimated cost
56 m², 19 m²A$4,958
111 m², 37 m²A$9,908
223 m², 74 m²A$19,668

Where the money goes

  • LaborA$5,245 (74%)
  • MaterialsA$1,875 (26%)

Materials A$1,875 · Labor A$5,245 (53 hours) · Equipment, disposal & permits A$0 — before contingency, contractor overhead & profit and tax.

New South Wales vs. Australia average

A typical drywall installation in New South Wales costs 1% more than the Australia average (A$9,908 vs. A$9,796). The difference comes mainly from local wages — a carpenter earns on average A$52.87 per hour in New South Wales — and from regional material prices and GST of 10%.

Drywall Installation in New South Wales: local factors

New South Wales ranks 3rd of 8 states and territories for drywall installation cost (1 = most expensive) — among the most expensive.

Nearby regionTypical costvs. New South Wales
New South WalesA$9,908—
QueenslandA$9,594-3%
VictoriaA$9,624-3%
South AustraliaA$9,328-6%
Australian Capital TerritoryA$10,535+6%

Permits & contractor licensing in New South Wales

  • Contractor license: Builders and trades must be licensed or registered in New South Wales, and most states require home warranty insurance above a contract value.
  • Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
  • Permits: Building approval comes from your council or a private building certifier.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in New South Wales

TradeHoursAvg. wage / hourInstalled rate / hour
Drywall installer45A$50.23A$100.46
Painter8A$46.53A$93.06
  • Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a drywall installation includes

Drywall cost depends on the board area, board type, ceiling height and finish level. Level 4 is standard for flat paint; level 5 is for gloss paint and critical lighting.

Main cost factors

  • Wall and ceiling area
  • Board type
  • Finish level
  • Ceiling height

How to save money

  • Use moisture-resistant board in bathrooms and fire-rated board in garages.
  • Larger 4×12 sheets mean fewer seams on long walls.
  • Hire a separate finisher for high-visibility areas.
  • Prime with drywall primer before painting.

Timeline

3–7 days including drying time between coats.

Permits

Usually part of a larger remodel permit; fire-rated assemblies need inspection.

Frequently asked questions

How much does a drywall installation cost in New South Wales?

A typical drywall installation in New South Wales costs about A$9,908, with most projects between A$8,719 and A$11,394. That is about A$67 per m² of board area.

How much of the cost is labor?

Labor is about 74% of the direct cost (53 work hours) for a typical project in New South Wales. Materials are A$1,875 and equipment, disposal and permits A$0, before contingency, contractor overhead and tax.

Is a drywall installation cheaper in New South Wales than in nearby regions?

A typical drywall installation costs A$9,908 in New South Wales. Among nearby regions, South Australia is the lowest at A$9,328 and Australian Capital Territory the highest at A$10,535. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in New South Wales?

Builders and trades must be licensed or registered in New South Wales, and most states require home warranty insurance above a contract value.

How long does a drywall installation take?

3–7 days including drying time between coats.

Do I need a permit for a drywall installation?

Usually part of a larger remodel permit; fire-rated assemblies need inspection.

How many drywall sheets do I need?

The breakdown shows the sheet count for your wall and ceiling area with 10% extra.

What is the cost per square foot to hang and finish drywall?

See the cost per square foot under the total.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Drywall Installation cost in other states

Compare drywall installation costs in every state, province and territory →

More cost calculators for New South Wales

Choose your location

NSW New South WalesVIC VictoriaQLD QueenslandSA South AustraliaWA Western AustraliaTAS TasmaniaNT Northern TerritoryACT Australian Capital Territory