HVAC Replacement Cost Calculator — Queensland

Average hvac replacement cost in Queensland: A$20,702 (typical range A$18,218–A$23,807, A$111 per m²). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

How much does a hvac replacement cost in Queensland?

Based on current Queensland labor rates and material prices, a typical hvac replacement costs about A$20,702. Most projects fall between A$18,218 and A$23,807, or roughly A$111 per m². This example assumes: home size 186 m², capacity 3.5 ton, system Gas furnace + central AC, efficiency High (16–17 SEER2 / 96% AFUE).

Cost by project size

Project sizeEstimated cost
93 m²A$18,254
186 m²A$20,702
372 m²A$27,033

Where the money goes

  • EquipmentA$9,283 (62%)
  • InstallationA$3,970 (27%)
  • DuctworkA$1,318 (9%)
  • PermitA$307 (2%)

Materials A$10,147 · Labor A$4,075 (36 hours) · Equipment, disposal & permits A$655 — before contingency, contractor overhead & profit and tax.

Queensland vs. Australia average

A typical hvac replacement in Queensland costs 2% less than the Australia average (A$20,702 vs. A$21,121). The difference comes mainly from local wages — a carpenter earns on average A$51.14 per hour in Queensland — and from regional material prices and GST of 10%.

HVAC Replacement in Queensland: local factors

Queensland ranks 7th of 8 states and territories for hvac replacement cost (1 = most expensive) — among the most affordable.

Nearby regionTypical costvs. Queensland
QueenslandA$20,702—
New South WalesA$21,340+3%
Northern TerritoryA$23,076+11%
South AustraliaA$20,359-2%

What affects the price in Queensland

  • Hot summers: Cooling is the main load: a higher-efficiency (higher SEER2) system pays back faster here, and federal minimums are stricter in the southern region.

Permits & contractor licensing in Queensland

  • Contractor license: Builders and trades must be licensed or registered in Queensland, and most states require home warranty insurance above a contract value.
  • Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
  • Permits: Building approval comes from your council or a private building certifier.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Queensland

TradeHoursAvg. wage / hourInstalled rate / hour
HVAC technician32A$56.26A$112.52
Electrician4A$59.33A$118.66
  • Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a hvac replacement includes

HVAC cost depends on house size (system tonnage), system type, efficiency and how much ductwork needs work. Heat pumps and high-efficiency systems cost more up front but lower energy bills and often qualify for rebates.

Main cost factors

  • Home size (system tonnage)
  • System type
  • Efficiency rating
  • Ductwork condition
  • Thermostat and zoning

How to save money

  • Ask for a Manual J load calculation instead of sizing by rule of thumb.
  • Sealing leaky ducts can save 20% on heating and cooling.
  • Check federal, state and utility rebates for heat pumps.
  • Replace furnace and AC together so the components match.

Timeline

1–3 days.

Permits

A mechanical permit and inspection are required for equipment replacement.

Frequently asked questions

How much does a hvac replacement cost in Queensland?

A typical hvac replacement in Queensland costs about A$20,702, with most projects between A$18,218 and A$23,807. That is about A$111 per m².

How much of the cost is labor?

Labor is about 27% of the direct cost (36 work hours) for a typical project in Queensland. Materials are A$10,147 and equipment, disposal and permits A$655, before contingency, contractor overhead and tax.

Is a hvac replacement cheaper in Queensland than in nearby regions?

A typical hvac replacement costs A$20,702 in Queensland. Among nearby regions, South Australia is the lowest at A$20,359 and Northern Territory the highest at A$23,076. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Queensland?

Builders and trades must be licensed or registered in Queensland, and most states require home warranty insurance above a contract value.

What local conditions affect hvac replacement costs in Queensland?

Cooling is the main load: a higher-efficiency (higher SEER2) system pays back faster here, and federal minimums are stricter in the southern region.

How long does a hvac replacement take?

1–3 days.

Do I need a permit for a hvac replacement?

A mechanical permit and inspection are required for equipment replacement.

What size system do I need?

Roughly 1 ton per 500–600 sq ft — the calculator sizes it from your home area.

Heat pump or furnace + AC?

Heat pumps are more efficient in most climates; switch the system type to compare costs.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

HVAC Replacement cost in other states

Compare hvac replacement costs in every state, province and territory →

More cost calculators for Queensland

Choose your location

NSW New South WalesVIC VictoriaQLD QueenslandSA South AustraliaWA Western AustraliaTAS TasmaniaNT Northern TerritoryACT Australian Capital Territory