Electrical Rewiring & Panel Cost Calculator — Queensland

Average electrical rewiring & panel cost in Queensland: A$48,925 (typical range A$43,054–A$56,264, A$293 per m²). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

How much does a electrical rewiring & panel cost in Queensland?

Based on current Queensland labor rates and material prices, a typical electrical rewiring & panel costs about A$48,925. Most projects fall between A$43,054 and A$56,264, or roughly A$293 per m². This example assumes: home size 167 m², scope Full rewire, panel 200 A, ev charger No.

Cost by project size

Project sizeEstimated cost
84 m²A$28,476
167 m²A$48,925
334 m²A$89,824

Where the money goes

  • RewiringA$22,353 (64%)
  • Wall repairA$6,612 (19%)
  • Service & panelA$4,449 (13%)
  • ExtrasA$1,336 (4%)
  • Permit & inspectionA$410 (1%)

Materials A$8,416 · Labor A$26,055 (230 hours) · Equipment, disposal & permits A$689 — before contingency, contractor overhead & profit and tax.

Queensland vs. Australia average

A typical electrical rewiring & panel in Queensland costs 2% less than the Australia average (A$48,925 vs. A$49,952). The difference comes mainly from local wages — a carpenter earns on average A$51.14 per hour in Queensland — and from regional material prices and GST of 10%.

Electrical Rewiring & Panel in Queensland: local factors

Queensland ranks 6th of 8 states and territories for electrical rewiring & panel cost (1 = most expensive) — among the most affordable.

Nearby regionTypical costvs. Queensland
QueenslandA$48,925—
New South WalesA$50,524+3%
Northern TerritoryA$50,067+2%
South AustraliaA$47,560-3%

Permits & contractor licensing in Queensland

  • Contractor license: Builders and trades must be licensed or registered in Queensland, and most states require home warranty insurance above a contract value.
  • Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
  • Permits: Building approval comes from your council or a private building certifier.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Queensland

TradeHoursAvg. wage / hourInstalled rate / hour
Electrician171A$59.33A$118.66
Drywall installer60A$48.59A$97.18
  • Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a electrical rewiring & panel includes

Rewiring includes a new panel and service, new circuits fished through walls, outlets, switches and detectors, plus patching the access holes. Plaster walls take longer than drywall.

Main cost factors

  • Home size
  • Panel size
  • Full or partial rewire
  • Wall repair after rewiring
  • EV charger

How to save money

  • Upgrade to a 200 A panel if you plan an EV charger, heat pump or induction cooking.
  • Do rewiring before painting and flooring.
  • Add outlets and USB-C receptacles while walls are open.
  • Whole-home surge protection is inexpensive insurance.

Timeline

3–10 days for a full rewire.

Permits

Electrical permits and inspections are always required; utility coordination is needed for service upgrades.

Frequently asked questions

How much does a electrical rewiring & panel cost in Queensland?

A typical electrical rewiring & panel in Queensland costs about A$48,925, with most projects between A$43,054 and A$56,264. That is about A$293 per m².

How much of the cost is labor?

Labor is about 74% of the direct cost (230 work hours) for a typical project in Queensland. Materials are A$8,416 and equipment, disposal and permits A$689, before contingency, contractor overhead and tax.

Is a electrical rewiring & panel cheaper in Queensland than in nearby regions?

A typical electrical rewiring & panel costs A$48,925 in Queensland. Among nearby regions, South Australia is the lowest at A$47,560 and New South Wales the highest at A$50,524. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Queensland?

Builders and trades must be licensed or registered in Queensland, and most states require home warranty insurance above a contract value.

How long does a electrical rewiring & panel take?

3–10 days for a full rewire.

Do I need a permit for a electrical rewiring & panel?

Electrical permits and inspections are always required; utility coordination is needed for service upgrades.

Do I need to rewire an old house?

Homes with knob-and-tube, aluminum branch wiring or a fuse box are strong candidates.

How much does a panel upgrade cost?

Choose “Panel upgrade only” to see just the panel and service cost.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Electrical Rewiring & Panel cost in other states

Compare electrical rewiring & panel costs in every state, province and territory →

More cost calculators for Queensland

Choose your location

NSW New South WalesVIC VictoriaQLD QueenslandSA South AustraliaWA Western AustraliaTAS TasmaniaNT Northern TerritoryACT Australian Capital Territory