Iron & Metal Fence Cost Calculator — Michigan

Average iron & metal fence cost in Michigan: $14,967 (typical range $13,171–$17,212, $100 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Michigan pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a iron & metal fence cost in Michigan?

Based on current Michigan labor rates and material prices, a typical iron & metal fence costs about $14,967. Most projects fall between $13,171 and $17,212, or roughly $100 per linear foot. This example assumes: type Wrought iron / ornamental steel, length 150 ft, height 5 ft, gates 1 walk / 0 drive.

Cost by project size

Project sizeEstimated cost
75 ft$8,505
150 ft$14,967
300 ft$28,427

Where the money goes

  • Fence materials$10,413 (91%)
  • Gates & automation$647 (6%)
  • Permit & layout$348 (3%)

Materials $8,949 · Labor $2,327 (48 hours) · Equipment, disposal & permits $132 — before contingency, contractor overhead & profit and tax.

Michigan vs. United States average

A typical iron & metal fence in Michigan costs 0% less than the United States average ($14,967 vs. $14,917). The difference comes mainly from local wages — a carpenter earns on average $29.88 per hour in Michigan — and from regional material prices and Sales tax (materials) of 6%.

Iron & Metal Fence in Michigan: local factors

Michigan ranks 21st of 51 states for iron & metal fence cost (1 = most expensive) — in the middle.

Nearby stateTypical costvs. Michigan
Michigan$14,967—
Indiana$14,753-1%
Ohio$14,811-1%
Wisconsin$15,089+1%

What affects the price in Michigan

  • Deep frost: Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post.

Permits & contractor licensing in Michigan

  • Contractor license: Residential builders and maintenance & alteration contractors need a state license (LARA) for jobs over $600.
  • Building code: The Michigan Residential Code applies statewide.
  • Permits: Permits are issued by the local building department (or the state where a community does not enforce the code).

Verify a contractor: Michigan LARA – Residential Builders ↗. Rules change — always confirm with your local building department.

Labor rates for this project in Michigan

TradeHoursAvg. wage / hourInstalled rate / hour
Fence erector48$24.04$48.08
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a iron & metal fence includes

Metal fences range from budget chain link to ornamental aluminum and wrought iron. Driveway gates and automatic openers can cost as much as the fence itself.

Main cost factors

  • Fence type
  • Length and height
  • Walk and driveway gates
  • Automatic gate opener
  • Finish (galvanized, powder coat)

How to save money

  • Chain link is the cheapest way to enclose a large yard.
  • Aluminum looks like iron but never rusts and costs less.
  • Powder-coated steel lasts much longer than painted steel.
  • Sliding gates suit sloped driveways; swing gates are cheaper on flat ground.

Timeline

2–5 days, plus 2–4 weeks for custom gates.

Permits

Permits are often required for fences over 6 ft and for electrical work on gate openers.

Frequently asked questions

How much does a iron & metal fence cost in Michigan?

A typical iron & metal fence in Michigan costs about $14,967, with most projects between $13,171 and $17,212. That is about $100 per linear foot.

How much of the cost is labor?

Labor is about 20% of the direct cost (48 work hours) for a typical project in Michigan. Materials are $8,949 and equipment, disposal and permits $132, before contingency, contractor overhead and tax.

Is a iron & metal fence cheaper in Michigan than in nearby states?

A typical iron & metal fence costs $14,967 in Michigan. Among nearby states, Indiana is the lowest at $14,753 and Wisconsin the highest at $15,089. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Michigan?

Residential builders and maintenance & alteration contractors need a state license (LARA) for jobs over $600.

What local conditions affect iron & metal fence costs in Michigan?

Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post.

How long does a iron & metal fence take?

2–5 days, plus 2–4 weeks for custom gates.

Do I need a permit for a iron & metal fence?

Permits are often required for fences over 6 ft and for electrical work on gate openers.

Is wrought iron more expensive than aluminum?

Yes — compare both by switching the fence type above.

How much does an automatic gate opener cost?

Turn on “Automatic gate opener” to see opener, safety and wiring costs.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Iron & Metal Fence cost in other states

Compare iron & metal fence costs in every state, province and territory →

More cost calculators for Michigan

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming