Iron & Metal Fence Cost Calculator — Washington
Average iron & metal fence cost in Washington: $16,604 (typical range $14,612–$19,095, $111 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Washington pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a iron & metal fence cost in Washington?
Based on current Washington labor rates and material prices, a typical iron & metal fence costs about $16,604. Most projects fall between $14,612 and $19,095, or roughly $111 per linear foot. This example assumes: type Wrought iron / ornamental steel, length 150 ft, height 5 ft, gates 1 walk / 0 drive.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 75 ft | $9,445 |
| 150 ft | $16,604 |
| 300 ft | $31,514 |
Where the money goes
- Fence materials$11,508 (91%)
- Gates & automation$714 (6%)
- Permit & layout$412 (3%)
Materials $9,575 · Labor $2,918 (48 hours) · Equipment, disposal & permits $141 — before contingency, contractor overhead & profit and tax.
Washington vs. United States average
A typical iron & metal fence in Washington costs 11% more than the United States average ($16,604 vs. $14,917). The difference comes mainly from local wages — a carpenter earns on average $38.06 per hour in Washington — and from regional material prices and Sales tax (materials) of 6.5%.
Iron & Metal Fence in Washington: local factors
Washington ranks 5th of 51 states for iron & metal fence cost (1 = most expensive) — among the most expensive.
What affects the price in Washington
- Moderate frost: Posts and footings typically go 24–42 in. (0.6–1.1 m) deep to stay below the frost line.
Permits & contractor licensing in Washington
- Contractor license: Contractors must register with the Department of Labor & Industries (bond and insurance required); electricians and plumbers are licensed by L&I.
- Building code: The Washington State Building Code and Washington State Energy Code — one of the strictest energy codes in the US.
- Permits: Permits are issued by the city or county; L&I issues electrical permits in many areas.
Verify a contractor: Washington Department of Labor & Industries ↗. Rules change — always confirm with your local building department.
Labor rates for this project in Washington
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Fence erector | 48 | $30.14 | $60.28 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a iron & metal fence includes
Metal fences range from budget chain link to ornamental aluminum and wrought iron. Driveway gates and automatic openers can cost as much as the fence itself.
Main cost factors
- Fence type
- Length and height
- Walk and driveway gates
- Automatic gate opener
- Finish (galvanized, powder coat)
How to save money
- Chain link is the cheapest way to enclose a large yard.
- Aluminum looks like iron but never rusts and costs less.
- Powder-coated steel lasts much longer than painted steel.
- Sliding gates suit sloped driveways; swing gates are cheaper on flat ground.
Timeline
2–5 days, plus 2–4 weeks for custom gates.
Permits
Permits are often required for fences over 6 ft and for electrical work on gate openers.
Frequently asked questions
How much does a iron & metal fence cost in Washington?
A typical iron & metal fence in Washington costs about $16,604, with most projects between $14,612 and $19,095. That is about $111 per linear foot.
How much of the cost is labor?
Labor is about 23% of the direct cost (48 work hours) for a typical project in Washington. Materials are $9,575 and equipment, disposal and permits $141, before contingency, contractor overhead and tax.
Is a iron & metal fence cheaper in Washington than in nearby states?
A typical iron & metal fence costs $16,604 in Washington. Among nearby states, Idaho is the lowest at $14,639 and Oregon the highest at $15,345. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Washington?
Contractors must register with the Department of Labor & Industries (bond and insurance required); electricians and plumbers are licensed by L&I.
What local conditions affect iron & metal fence costs in Washington?
Posts and footings typically go 24–42 in. (0.6–1.1 m) deep to stay below the frost line.
How long does a iron & metal fence take?
2–5 days, plus 2–4 weeks for custom gates.
Do I need a permit for a iron & metal fence?
Permits are often required for fences over 6 ft and for electrical work on gate openers.
Is wrought iron more expensive than aluminum?
Yes — compare both by switching the fence type above.
How much does an automatic gate opener cost?
Turn on “Automatic gate opener” to see opener, safety and wiring costs.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Iron & Metal Fence cost in other states
Compare iron & metal fence costs in every state, province and territory →