Paver Patio Cost Calculator — Michigan

Average paver patio cost in Michigan: $6,311 (typical range $5,554–$7,258, $21 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Michigan pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a paver patio cost in Michigan?

Based on current Michigan labor rates and material prices, a typical paver patio costs about $6,311. Most projects fall between $5,554 and $7,258, or roughly $21 per sq ft. This example assumes: patio area 300 sq ft, paver Concrete pavers, base 6".

Cost by project size

Project sizeEstimated cost
150 sq ft$3,558
300 sq ft$6,311
600 sq ft$12,255

Where the money goes

  • Pavers$2,720 (56%)
  • Excavation$1,135 (23%)
  • Base$1,024 (21%)

Materials $2,312 · Labor $1,630 (41 hours) · Equipment, disposal & permits $938 — before contingency, contractor overhead & profit and tax.

Michigan vs. United States average

A typical paver patio in Michigan costs 0% less than the United States average ($6,311 vs. $6,312). The difference comes mainly from local wages — a carpenter earns on average $29.88 per hour in Michigan — and from regional material prices and Sales tax (materials) of 6%.

Paver Patio in Michigan: local factors

Michigan ranks 21st of 51 states for paver patio cost (1 = most expensive) — in the middle.

Nearby stateTypical costvs. Michigan
Michigan$6,311—
Indiana$6,206-2%
Ohio$6,254-1%
Wisconsin$6,436+2%

What affects the price in Michigan

  • Snow loads: Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.

Permits & contractor licensing in Michigan

  • Contractor license: Residential builders and maintenance & alteration contractors need a state license (LARA) for jobs over $600.
  • Building code: The Michigan Residential Code applies statewide.
  • Permits: Permits are issued by the local building department (or the state where a community does not enforce the code).

Verify a contractor: Michigan LARA – Residential Builders ↗. Rules change — always confirm with your local building department.

Labor rates for this project in Michigan

TradeHoursAvg. wage / hourInstalled rate / hour
Landscaper / hardscape41$20.12$40.24
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a paver patio includes

A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.

Main cost factors

  • Patio area
  • Paver type
  • Base depth
  • Borders and edging
  • Steps or seat walls

How to save money

  • Do not skimp on base depth on clay soils.
  • Simple running-bond patterns waste less paver material.
  • Permeable pavers can reduce storm-water fees in some cities.
  • Seat walls and steps add the most cost per square foot.

Timeline

2–5 days.

Permits

Usually not required for ground-level patios; check lot coverage rules.

Frequently asked questions

How much does a paver patio cost in Michigan?

A typical paver patio in Michigan costs about $6,311, with most projects between $5,554 and $7,258. That is about $21 per sq ft.

How much of the cost is labor?

Labor is about 33% of the direct cost (41 work hours) for a typical project in Michigan. Materials are $2,312 and equipment, disposal and permits $938, before contingency, contractor overhead and tax.

Is a paver patio cheaper in Michigan than in nearby states?

A typical paver patio costs $6,311 in Michigan. Among nearby states, Indiana is the lowest at $6,206 and Wisconsin the highest at $6,436. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Michigan?

Residential builders and maintenance & alteration contractors need a state license (LARA) for jobs over $600.

What local conditions affect paver patio costs in Michigan?

Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.

How long does a paver patio take?

2–5 days.

Do I need a permit for a paver patio?

Usually not required for ground-level patios; check lot coverage rules.

How much base gravel do I need?

See the “Base” category for cubic yards for your base depth.

How long do paver patios last?

25–50 years with occasional re-sanding of joints.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Paver Patio cost in other states

Compare paver patio costs in every state, province and territory →

More cost calculators for Michigan

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming