Iron & Metal Fence Cost Calculator — North Carolina
Average iron & metal fence cost in North Carolina: $13,931 (typical range $12,259–$16,021, $93 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from North Carolina pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a iron & metal fence cost in North Carolina?
Based on current North Carolina labor rates and material prices, a typical iron & metal fence costs about $13,931. Most projects fall between $12,259 and $16,021, or roughly $93 per linear foot. This example assumes: type Wrought iron / ornamental steel, length 150 ft, height 5 ft, gates 1 walk / 0 drive.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 75 ft | $7,908 |
| 150 ft | $13,931 |
| 300 ft | $26,477 |
Where the money goes
- Fence materials$9,777 (91%)
- Gates & automation$608 (6%)
- Permit & layout$302 (3%)
Materials $8,680 · Labor $1,879 (48 hours) · Equipment, disposal & permits $128 — before contingency, contractor overhead & profit and tax.
North Carolina vs. United States average
A typical iron & metal fence in North Carolina costs 7% less than the United States average ($13,931 vs. $14,917). The difference comes mainly from local wages — a carpenter earns on average $24.28 per hour in North Carolina — and from regional material prices and Sales tax (materials) of 4.75%.
Iron & Metal Fence in North Carolina: local factors
North Carolina ranks 47th of 51 states for iron & metal fence cost (1 = most expensive) — among the most affordable.
| Nearby state | Typical cost | vs. North Carolina |
|---|---|---|
| North Carolina | $13,931 | — |
| Georgia | $13,975 | 0% |
| South Carolina | $14,139 | +1% |
| Tennessee | $14,234 | +2% |
| Virginia | $14,558 | +5% |
What affects the price in North Carolina
- Hurricane-force winds: Fences must resist high winds: deeper concrete-set posts, closer post spacing or reinforced masonry.
Permits & contractor licensing in North Carolina
- Contractor license: Projects of $40,000 or more require a license from the NC Licensing Board for General Contractors; electrical, plumbing and HVAC work need separate state licenses.
- Building code: The North Carolina Residential Code applies statewide, enforced by county and city inspection departments.
- Permits: Permits are issued by the county or city inspections department; homeowners may pull permits for work on their own home.
Verify a contractor: NC Licensing Board for General Contractors ↗. Rules change — always confirm with your local building department.
Labor rates for this project in North Carolina
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Fence erector | 48 | $19.41 | $38.82 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a iron & metal fence includes
Metal fences range from budget chain link to ornamental aluminum and wrought iron. Driveway gates and automatic openers can cost as much as the fence itself.
Main cost factors
- Fence type
- Length and height
- Walk and driveway gates
- Automatic gate opener
- Finish (galvanized, powder coat)
How to save money
- Chain link is the cheapest way to enclose a large yard.
- Aluminum looks like iron but never rusts and costs less.
- Powder-coated steel lasts much longer than painted steel.
- Sliding gates suit sloped driveways; swing gates are cheaper on flat ground.
Timeline
2–5 days, plus 2–4 weeks for custom gates.
Permits
Permits are often required for fences over 6 ft and for electrical work on gate openers.
Frequently asked questions
How much does a iron & metal fence cost in North Carolina?
A typical iron & metal fence in North Carolina costs about $13,931, with most projects between $12,259 and $16,021. That is about $93 per linear foot.
How much of the cost is labor?
Labor is about 18% of the direct cost (48 work hours) for a typical project in North Carolina. Materials are $8,680 and equipment, disposal and permits $128, before contingency, contractor overhead and tax.
Is a iron & metal fence cheaper in North Carolina than in nearby states?
A typical iron & metal fence costs $13,931 in North Carolina. Among nearby states, Georgia is the lowest at $13,975 and Virginia the highest at $14,558. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in North Carolina?
Projects of $40,000 or more require a license from the NC Licensing Board for General Contractors; electrical, plumbing and HVAC work need separate state licenses.
What local conditions affect iron & metal fence costs in North Carolina?
Fences must resist high winds: deeper concrete-set posts, closer post spacing or reinforced masonry.
How long does a iron & metal fence take?
2–5 days, plus 2–4 weeks for custom gates.
Do I need a permit for a iron & metal fence?
Permits are often required for fences over 6 ft and for electrical work on gate openers.
Is wrought iron more expensive than aluminum?
Yes — compare both by switching the fence type above.
How much does an automatic gate opener cost?
Turn on “Automatic gate opener” to see opener, safety and wiring costs.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Iron & Metal Fence cost in other states
Compare iron & metal fence costs in every state, province and territory →