Paver Patio Cost Calculator — New South Wales

Average paver patio cost in New South Wales: A$10,686 (typical range A$9,404–A$12,289, A$383 per m²). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from New South Wales pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a paver patio cost in New South Wales?

Based on current New South Wales labor rates and material prices, a typical paver patio costs about A$10,686. Most projects fall between A$9,404 and A$12,289, or roughly A$383 per m². This example assumes: patio area 28 m², paver Concrete pavers, base 6".

Cost by project size

Project sizeEstimated cost
14 m²A$5,917
28 m²A$10,686
56 m²A$20,855

Where the money goes

  • PaversA$4,326 (56%)
  • ExcavationA$1,725 (22%)
  • BaseA$1,628 (21%)

Materials A$3,026 · Labor A$3,426 (41 hours) · Equipment, disposal & permits A$1,227 — before contingency, contractor overhead & profit and tax.

New South Wales vs. Australia average

A typical paver patio in New South Wales costs 1% more than the Australia average (A$10,686 vs. A$10,572). The difference comes mainly from local wages — a carpenter earns on average A$52.87 per hour in New South Wales — and from regional material prices and GST of 10%.

Paver Patio in New South Wales: local factors

New South Wales ranks 4th of 8 states and territories for paver patio cost (1 = most expensive) — in the middle.

Nearby regionTypical costvs. New South Wales
New South WalesA$10,686—
QueenslandA$10,358-3%
VictoriaA$10,419-2%
South AustraliaA$10,145-5%
Australian Capital TerritoryA$11,096+4%

What affects the price in New South Wales

  • Expansive / reactive clay soils: Expansive clay soil swells and shrinks with moisture: expect more rebar, a thicker or post-tensioned slab, and good drainage.

Permits & contractor licensing in New South Wales

  • Contractor license: Builders and trades must be licensed or registered in New South Wales, and most states require home warranty insurance above a contract value.
  • Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
  • Permits: Building approval comes from your council or a private building certifier.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in New South Wales

TradeHoursAvg. wage / hourInstalled rate / hour
Landscaper / hardscape41A$42.30A$84.60
  • Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a paver patio includes

A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.

Main cost factors

  • Patio area
  • Paver type
  • Base depth
  • Borders and edging
  • Steps or seat walls

How to save money

  • Do not skimp on base depth on clay soils.
  • Simple running-bond patterns waste less paver material.
  • Permeable pavers can reduce storm-water fees in some cities.
  • Seat walls and steps add the most cost per square foot.

Timeline

2–5 days.

Permits

Usually not required for ground-level patios; check lot coverage rules.

Frequently asked questions

How much does a paver patio cost in New South Wales?

A typical paver patio in New South Wales costs about A$10,686, with most projects between A$9,404 and A$12,289. That is about A$383 per m².

How much of the cost is labor?

Labor is about 45% of the direct cost (41 work hours) for a typical project in New South Wales. Materials are A$3,026 and equipment, disposal and permits A$1,227, before contingency, contractor overhead and tax.

Is a paver patio cheaper in New South Wales than in nearby regions?

A typical paver patio costs A$10,686 in New South Wales. Among nearby regions, South Australia is the lowest at A$10,145 and Australian Capital Territory the highest at A$11,096. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in New South Wales?

Builders and trades must be licensed or registered in New South Wales, and most states require home warranty insurance above a contract value.

What local conditions affect paver patio costs in New South Wales?

Expansive clay soil swells and shrinks with moisture: expect more rebar, a thicker or post-tensioned slab, and good drainage.

How long does a paver patio take?

2–5 days.

Do I need a permit for a paver patio?

Usually not required for ground-level patios; check lot coverage rules.

How much base gravel do I need?

See the “Base” category for cubic yards for your base depth.

How long do paver patios last?

25–50 years with occasional re-sanding of joints.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Paver Patio cost in other states

Compare paver patio costs in every state, province and territory →

More cost calculators for New South Wales

Choose your location

NSW New South WalesVIC VictoriaQLD QueenslandSA South AustraliaWA Western AustraliaTAS TasmaniaNT Northern TerritoryACT Australian Capital Territory