Swimming Pool Cost Calculator — New South Wales

Average swimming pool cost in New South Wales: A$140,815 (typical range A$123,917–A$161,937, A$2,960 per m² of water surface). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from New South Wales pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a swimming pool cost in New South Wales?

Based on current New South Wales labor rates and material prices, a typical swimming pool costs about A$140,815. Most projects fall between A$123,917 and A$161,937, or roughly A$2,960 per m² of water surface. This example assumes: pool size 9.8 m × 4.9 m, water surface 48 m², volume 72,479 L, type Concrete / gunite.

Cost by project size

Project sizeEstimated cost
7.3 × 3.7 mA$113,864
9.8 × 4.9 mA$140,815
12 × 6.1 mA$171,627

Where the money goes

  • Pool structureA$50,706 (50%)
  • Design, permits & excavationA$15,796 (16%)
  • Plumbing & equipmentA$11,686 (12%)
  • Safety fence & gateA$8,689 (9%)
  • Pool deckA$7,977 (8%)
  • ElectricalA$4,475 (4%)
  • Start-upA$1,868 (2%)

Materials A$51,273 · Labor A$36,086 (340 hours) · Equipment, disposal & permits A$13,837 — before contingency, contractor overhead & profit and tax.

New South Wales vs. Australia average

A typical swimming pool in New South Wales costs 1% more than the Australia average (A$140,815 vs. A$139,351). The difference comes mainly from local wages — a carpenter earns on average A$52.87 per hour in New South Wales — and from regional material prices and GST of 10%.

Swimming Pool in New South Wales: local factors

New South Wales ranks 4th of 8 states and territories for swimming pool cost (1 = most expensive) — in the middle.

Nearby regionTypical costvs. New South Wales
New South WalesA$140,815—
QueenslandA$136,562-3%
VictoriaA$137,467-2%
South AustraliaA$134,034-5%
Australian Capital TerritoryA$145,137+3%

What affects the price in New South Wales

  • Expansive / reactive clay soils: Expansive clay soil swells and shrinks with moisture: expect more rebar, a thicker or post-tensioned slab, and good drainage.

Permits & contractor licensing in New South Wales

  • Contractor license: Builders and trades must be licensed or registered in New South Wales, and most states require home warranty insurance above a contract value.
  • Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
  • Permits: Building approval comes from your council or a private building certifier.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in New South Wales

TradeHoursAvg. wage / hourInstalled rate / hour
Cement mason / concrete finisher114A$51.81A$103.62
Brick / block mason58A$53.93A$107.86
Ironworker / welder40A$58.16A$116.32
Construction laborer32A$42.30A$84.60
Plumber32A$60.27A$120.54
Fence erector26A$44.94A$89.88
Equipment operator22A$57.10A$114.20
Electrician16A$61.33A$122.66
  • Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a swimming pool includes

An in-ground pool includes design and permits, excavation and haul-off, the pool structure, plumbing and equipment, electrical bonding, coping and tile, a deck and a code-compliant safety fence. Concrete pools are the most flexible and most expensive; fiberglass is fastest to install.

Main cost factors

  • Pool type and size
  • Depth and shape
  • Heater and automation
  • Deck area and material
  • Safety fencing

How to save money

  • A simple rectangle costs less than a freeform shape with many curves.
  • A variable-speed pump pays for itself in lower electricity bills.
  • A heat pump is cheaper to run than a gas heater in warm climates.
  • Budget for fencing, landscaping and higher insurance.

Timeline

6–12 weeks for concrete; 3–5 weeks for fiberglass.

Permits

A pool permit, electrical permit and a compliant barrier/fence are required almost everywhere.

Frequently asked questions

How much does a swimming pool cost in New South Wales?

A typical swimming pool in New South Wales costs about A$140,815, with most projects between A$123,917 and A$161,937. That is about A$2,960 per m² of water surface.

How much of the cost is labor?

Labor is about 36% of the direct cost (340 work hours) for a typical project in New South Wales. Materials are A$51,273 and equipment, disposal and permits A$13,837, before contingency, contractor overhead and tax.

Is a swimming pool cheaper in New South Wales than in nearby regions?

A typical swimming pool costs A$140,815 in New South Wales. Among nearby regions, South Australia is the lowest at A$134,034 and Australian Capital Territory the highest at A$145,137. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in New South Wales?

Builders and trades must be licensed or registered in New South Wales, and most states require home warranty insurance above a contract value.

What local conditions affect swimming pool costs in New South Wales?

Expansive clay soil swells and shrinks with moisture: expect more rebar, a thicker or post-tensioned slab, and good drainage.

How long does a swimming pool take?

6–12 weeks for concrete; 3–5 weeks for fiberglass.

Do I need a permit for a swimming pool?

A pool permit, electrical permit and a compliant barrier/fence are required almost everywhere.

Concrete, vinyl or fiberglass — which is cheapest?

Vinyl liner pools usually have the lowest upfront cost, concrete the highest. Switch the pool type in the calculator to compare.

What does a pool cost to maintain?

Plan for chemicals, electricity, and periodic resurfacing or liner replacement.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Swimming Pool cost in other states

Compare swimming pool costs in every state, province and territory →

More cost calculators for New South Wales

Choose your location

NSW New South WalesVIC VictoriaQLD QueenslandSA South AustraliaWA Western AustraliaTAS TasmaniaNT Northern TerritoryACT Australian Capital Territory