Electrical Rewiring & Panel Cost Calculator — New South Wales

Average electrical rewiring & panel cost in New South Wales: A$50,524 (typical range A$44,461–A$58,103, A$302 per m²). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from New South Wales pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a electrical rewiring & panel cost in New South Wales?

Based on current New South Wales labor rates and material prices, a typical electrical rewiring & panel costs about A$50,524. Most projects fall between A$44,461 and A$58,103, or roughly A$302 per m². This example assumes: home size 167 m², scope Full rewire, panel 200 A, ev charger No.

Cost by project size

Project sizeEstimated cost
84 m²A$29,401
167 m²A$50,524
334 m²A$92,771

Where the money goes

  • RewiringA$23,089 (64%)
  • Wall repairA$6,831 (19%)
  • Service & panelA$4,588 (13%)
  • ExtrasA$1,378 (4%)
  • Permit & inspectionA$422 (1%)

Materials A$8,666 · Labor A$26,934 (230 hours) · Equipment, disposal & permits A$709 — before contingency, contractor overhead & profit and tax.

New South Wales vs. Australia average

A typical electrical rewiring & panel in New South Wales costs 1% more than the Australia average (A$50,524 vs. A$49,952). The difference comes mainly from local wages — a carpenter earns on average A$52.87 per hour in New South Wales — and from regional material prices and GST of 10%.

Electrical Rewiring & Panel in New South Wales: local factors

New South Wales ranks 3rd of 8 states and territories for electrical rewiring & panel cost (1 = most expensive) — among the most expensive.

Nearby regionTypical costvs. New South Wales
New South WalesA$50,524—
QueenslandA$48,925-3%
VictoriaA$49,075-3%
South AustraliaA$47,560-6%
Australian Capital TerritoryA$53,750+6%

Permits & contractor licensing in New South Wales

  • Contractor license: Builders and trades must be licensed or registered in New South Wales, and most states require home warranty insurance above a contract value.
  • Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
  • Permits: Building approval comes from your council or a private building certifier.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in New South Wales

TradeHoursAvg. wage / hourInstalled rate / hour
Electrician171A$61.33A$122.66
Drywall installer60A$50.23A$100.46
  • Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a electrical rewiring & panel includes

Rewiring includes a new panel and service, new circuits fished through walls, outlets, switches and detectors, plus patching the access holes. Plaster walls take longer than drywall.

Main cost factors

  • Home size
  • Panel size
  • Full or partial rewire
  • Wall repair after rewiring
  • EV charger

How to save money

  • Upgrade to a 200 A panel if you plan an EV charger, heat pump or induction cooking.
  • Do rewiring before painting and flooring.
  • Add outlets and USB-C receptacles while walls are open.
  • Whole-home surge protection is inexpensive insurance.

Timeline

3–10 days for a full rewire.

Permits

Electrical permits and inspections are always required; utility coordination is needed for service upgrades.

Frequently asked questions

How much does a electrical rewiring & panel cost in New South Wales?

A typical electrical rewiring & panel in New South Wales costs about A$50,524, with most projects between A$44,461 and A$58,103. That is about A$302 per m².

How much of the cost is labor?

Labor is about 74% of the direct cost (230 work hours) for a typical project in New South Wales. Materials are A$8,666 and equipment, disposal and permits A$709, before contingency, contractor overhead and tax.

Is a electrical rewiring & panel cheaper in New South Wales than in nearby regions?

A typical electrical rewiring & panel costs A$50,524 in New South Wales. Among nearby regions, South Australia is the lowest at A$47,560 and Australian Capital Territory the highest at A$53,750. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in New South Wales?

Builders and trades must be licensed or registered in New South Wales, and most states require home warranty insurance above a contract value.

How long does a electrical rewiring & panel take?

3–10 days for a full rewire.

Do I need a permit for a electrical rewiring & panel?

Electrical permits and inspections are always required; utility coordination is needed for service upgrades.

Do I need to rewire an old house?

Homes with knob-and-tube, aluminum branch wiring or a fuse box are strong candidates.

How much does a panel upgrade cost?

Choose “Panel upgrade only” to see just the panel and service cost.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Electrical Rewiring & Panel cost in other states

Compare electrical rewiring & panel costs in every state, province and territory →

More cost calculators for New South Wales

Choose your location

NSW New South WalesVIC VictoriaQLD QueenslandSA South AustraliaWA Western AustraliaTAS TasmaniaNT Northern TerritoryACT Australian Capital Territory