Swimming Pool Cost Calculator (2026)

The average swimming pool in the U.S. costs about $91,082 (typical range $80,152–$104,744). Prices below use national average wages — choose your state or province for local labor rates and taxes. Updated November 2026

Loading calculator…

Swimming Pool cost by state — United States (USD)

Most expensive: Hawaii ($120,826), Alaska ($116,627), Massachusetts ($104,026). Least expensive: Arkansas ($81,826), Alabama ($81,855), Mississippi ($81,877).

StateTypical costRangeUnit price
Alabama$81,855$72,032 – $94,133$160 per sq ft
Alaska$116,627$102,632 – $134,121$228 per sq ft
Arizona$88,878$78,213 – $102,210$174 per sq ft
Arkansas$81,826$72,007 – $94,100$160 per sq ft
California$102,593$90,282 – $117,982$200 per sq ft
Colorado$91,380$80,414 – $105,087$178 per sq ft
Connecticut$97,515$85,813 – $112,142$190 per sq ft
Delaware$89,978$79,181 – $103,475$176 per sq ft
District of Columbia$99,815$87,837 – $114,787$195 per sq ft
Florida$86,536$76,152 – $99,516$169 per sq ft
Georgia$83,958$73,883 – $96,552$164 per sq ft
Hawaii$120,826$106,327 – $138,950$236 per sq ft
Idaho$88,992$78,313 – $102,341$174 per sq ft
Illinois$101,293$89,138 – $116,487$198 per sq ft
Indiana$90,559$79,692 – $104,143$177 per sq ft
Iowa$88,928$78,257 – $102,267$174 per sq ft
Kansas$87,710$77,185 – $100,867$171 per sq ft
Kentucky$86,237$75,889 – $99,173$168 per sq ft
Louisiana$85,660$75,381 – $98,509$167 per sq ft
Maine$91,212$80,267 – $104,894$178 per sq ft
Maryland$91,481$80,503 – $105,203$179 per sq ft
Massachusetts$104,026$91,543 – $119,630$203 per sq ft
Michigan$91,430$80,458 – $105,145$179 per sq ft
Minnesota$99,184$87,282 – $114,062$194 per sq ft
Mississippi$81,877$72,052 – $94,159$160 per sq ft
Missouri$90,682$79,800 – $104,284$177 per sq ft
Montana$90,390$79,543 – $103,949$177 per sq ft
Nebraska$86,904$76,476 – $99,940$170 per sq ft
Nevada$93,977$82,700 – $108,074$184 per sq ft
New Hampshire$90,217$79,391 – $103,750$176 per sq ft
New Jersey$101,795$89,580 – $117,064$199 per sq ft
New Mexico$85,689$75,406 – $98,542$167 per sq ft
New York$102,791$90,456 – $118,210$201 per sq ft
North Carolina$83,463$73,447 – $95,982$163 per sq ft
North Dakota$90,982$80,064 – $104,629$178 per sq ft
Ohio$91,276$80,323 – $104,967$178 per sq ft
Oklahoma$83,075$73,106 – $95,536$162 per sq ft
Oregon$96,675$85,074 – $111,176$189 per sq ft
Pennsylvania$93,976$82,699 – $108,072$184 per sq ft
Rhode Island$97,980$86,222 – $112,677$191 per sq ft
South Carolina$85,328$75,089 – $98,127$167 per sq ft
South Dakota$85,832$75,532 – $98,707$168 per sq ft
Tennessee$85,964$75,648 – $98,859$168 per sq ft
Texas$84,857$74,674 – $97,586$166 per sq ft
Utah$88,408$77,799 – $101,669$173 per sq ft
Vermont$93,616$82,382 – $107,658$183 per sq ft
Virginia$87,515$77,013 – $100,642$171 per sq ft
Washington$103,544$91,119 – $119,076$202 per sq ft
West Virginia$86,181$75,839 – $99,108$168 per sq ft
Wisconsin$94,130$82,834 – $108,250$184 per sq ft
Wyoming$90,206$79,381 – $103,737$176 per sq ft

Swimming Pool cost by province — Canada (CAD)

Most expensive: Nunavut (C$190,599), Northwest Territories (C$166,540), Yukon (C$157,493). Least expensive: Alberta (C$125,203), Manitoba (C$127,167), Saskatchewan (C$127,498).

ProvinceTypical costRangeUnit price
AlbertaC$125,203C$110,179 – C$143,983C$245 per sq ft
British ColumbiaC$140,027C$123,224 – C$161,031C$273 per sq ft
ManitobaC$127,167C$111,907 – C$146,242C$248 per sq ft
New BrunswickC$130,454C$114,800 – C$150,022C$255 per sq ft
Newfoundland and LabradorC$137,720C$121,194 – C$158,378C$269 per sq ft
Nova ScotiaC$132,744C$116,815 – C$152,656C$259 per sq ft
OntarioC$135,454C$119,200 – C$155,772C$265 per sq ft
Prince Edward IslandC$129,739C$114,170 – C$149,200C$253 per sq ft
QuebecC$136,401C$120,033 – C$156,861C$266 per sq ft
SaskatchewanC$127,498C$112,198 – C$146,623C$249 per sq ft
YukonC$157,493C$138,594 – C$181,117C$308 per sq ft
Northwest TerritoriesC$166,540C$146,555 – C$191,521C$325 per sq ft
NunavutC$190,599C$167,727 – C$219,189C$372 per sq ft

Swimming Pool cost by state — Australia (AUD)

Most expensive: Northern Territory (A$150,043), Western Australia (A$146,258), Australian Capital Territory (A$145,137). Least expensive: South Australia (A$134,034), Tasmania (A$136,313), Queensland (A$136,562).

StateTypical costRangeUnit price
New South WalesA$140,815A$123,917 – A$161,937A$2,960 per m²
VictoriaA$137,467A$120,971 – A$158,087A$2,890 per m²
QueenslandA$136,562A$120,175 – A$157,046A$2,871 per m²
South AustraliaA$134,034A$117,950 – A$154,139A$2,818 per m²
Western AustraliaA$146,258A$128,707 – A$168,197A$3,075 per m²
TasmaniaA$136,313A$119,955 – A$156,760A$2,866 per m²
Northern TerritoryA$150,043A$132,038 – A$172,549A$3,154 per m²
Australian Capital TerritoryA$145,137A$127,721 – A$166,908A$3,051 per m²

How much does a swimming pool cost in the U.S.?

Based on current the U.S. labor rates and material prices, a typical swimming pool costs about $91,082. Most projects fall between $80,152 and $104,744, or roughly $178 per sq ft of water surface. This example assumes: pool size 32 ft × 16 ft, water surface 512 sq ft, volume 19,149 gal, type Concrete / gunite.

Cost by project size

Project sizeEstimated cost
24 × 12 ft$73,601
32 × 16 ft$91,082
40 × 20 ft$111,040

Where the money goes

  • Pool structure$35,127 (50%)
  • Design, permits & excavation$11,202 (16%)
  • Plumbing & equipment$8,203 (12%)
  • Safety fence & gate$6,108 (9%)
  • Pool deck$5,453 (8%)
  • Electrical$3,019 (4%)
  • Start-up$1,311 (2%)

Materials $39,178 · Labor $20,671 (340 hours) · Equipment, disposal & permits $10,573 — before contingency, contractor overhead & profit and tax.

Labor rates for this project in the U.S. (national average)

TradeHoursAvg. wage / hourInstalled rate / hour
Cement mason / concrete finisher114$28.87$57.74
Brick / block mason58$32.83$65.66
Ironworker / welder40$33.79$67.58
Construction laborer32$25.02$50.04
Plumber32$34.70$69.40
Fence erector26$24.29$48.58
Equipment operator22$31.87$63.74
Electrician16$34.37$68.74
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a swimming pool includes

An in-ground pool includes design and permits, excavation and haul-off, the pool structure, plumbing and equipment, electrical bonding, coping and tile, a deck and a code-compliant safety fence. Concrete pools are the most flexible and most expensive; fiberglass is fastest to install.

Main cost factors

  • Pool type and size
  • Depth and shape
  • Heater and automation
  • Deck area and material
  • Safety fencing

How to save money

  • A simple rectangle costs less than a freeform shape with many curves.
  • A variable-speed pump pays for itself in lower electricity bills.
  • A heat pump is cheaper to run than a gas heater in warm climates.
  • Budget for fencing, landscaping and higher insurance.

Timeline

6–12 weeks for concrete; 3–5 weeks for fiberglass.

Permits

A pool permit, electrical permit and a compliant barrier/fence are required almost everywhere.

Frequently asked questions

How much does a swimming pool cost in the US?

A typical swimming pool in the US costs about $91,082, with most projects between $80,152 and $104,744. That is about $178 per sq ft of water surface.

How much of the cost is labor?

Labor is about 29% of the direct cost (340 work hours) for a typical project in the US. Materials are $39,178 and equipment, disposal and permits $10,573, before contingency, contractor overhead and tax.

How long does a swimming pool take?

6–12 weeks for concrete; 3–5 weeks for fiberglass.

Do I need a permit for a swimming pool?

A pool permit, electrical permit and a compliant barrier/fence are required almost everywhere.

Concrete, vinyl or fiberglass — which is cheapest?

Vinyl liner pools usually have the lowest upfront cost, concrete the highest. Switch the pool type in the calculator to compare.

What does a pool cost to maintain?

Plan for chemicals, electricity, and periodic resurfacing or liner replacement.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

More cost calculators

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming