Whole-Home Renovation Cost Calculator — Rhode Island

Average whole-home renovation cost in Rhode Island: $109,261 (typical range $96,150–$125,650, $99 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Rhode Island pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a whole-home renovation cost in Rhode Island?

Based on current Rhode Island labor rates and material prices, a typical whole-home renovation costs about $109,261. Most projects fall between $96,150 and $125,650, or roughly $99 per sq ft. This example assumes: floor area 1,100 sq ft, rooms 4, bathrooms 2, condition Bare shell (new build, nothing inside).

Cost by finish level

Finish levelEstimated costTypical range
Economy (budget)$90,152$79,334 – $103,675
Standard (mid-range)$109,261$96,150 – $125,650
Premium (high-end)$156,092$137,361 – $179,506

Cost by project size

Project sizeEstimated cost
600 sq ft, 2 rooms, 1 bathrooms$66,261
1,100 sq ft, 4 rooms, 2 bathrooms$109,261
2,000 sq ft, 6 rooms, 3 bathrooms$169,753

Where the money goes

  • Bathroom & kitchen fixtures$18,505 (22%)
  • Partition walls$10,476 (12%)
  • Wall plastering & floor screed$9,932 (12%)
  • Tile$7,619 (9%)
  • Electrical wiring$6,126 (7%)
  • Painting$5,329 (6%)
  • Electrical fixtures & lighting$5,026 (6%)
  • Flooring$4,611 (5%)

Materials $41,421 · Labor $38,266 (604 hours) · Equipment, disposal & permits $4,393 — before contingency, contractor overhead & profit and tax.

Rhode Island vs. United States average

A typical whole-home renovation in Rhode Island costs 4% more than the United States average ($109,261 vs. $104,819). The difference comes mainly from local wages — a carpenter earns on average $30.92 per hour in Rhode Island — and from regional material prices and Sales tax (materials) of 7%.

Whole-Home Renovation in Rhode Island: local factors

Rhode Island ranks 13th of 51 states for whole-home renovation cost (1 = most expensive) — among the most expensive.

Nearby stateTypical costvs. Rhode Island
Rhode Island$109,261—
Connecticut$112,125+3%
Massachusetts$121,262+11%

Permits & contractor licensing in Rhode Island

  • Contractor license: Licensing rules in Rhode Island depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
  • Building code: Building codes in Rhode Island are based on the International Residential Code, adopted with local amendments.
  • Permits: Building permits are issued by your city or county building department.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Rhode Island

TradeHoursAvg. wage / hourInstalled rate / hour
Brick / block mason99$39.41$78.82
Electrician98$35.65$71.30
Drywall installer94$27.58$55.16
Tile & stone setter83$25.26$50.52
Painter80$23.15$46.30
Plumber67$39.23$78.46
Carpenter39$30.92$61.84
Floor layer22$30.94$61.88
Cement mason / concrete finisher22$31.74$63.48
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a whole-home renovation includes

A whole-home renovation covers everything inside: walls, electrical and plumbing rough-in, heating, plaster, screed, drywall, waterproofing, tile, paint, flooring, doors, lighting and bathroom fixtures. Starting from a bare shell costs the most; a cosmetic refresh the least.

Main cost factors

  • Floor area and number of rooms
  • Starting condition (shell, dated, good)
  • Number of bathrooms
  • Finish package
  • Electrical, plumbing and heating scope

How to save money

  • Finish all “wet” work (plaster, screed, tile) before flooring and paint.
  • Buy tile, flooring and doors early — delivery delays stop the whole job.
  • Keep 10% of the budget for surprises behind walls.
  • Electrical and plumbing points are cheaper to add before plastering than later.

Timeline

2–4 months for a 1,000–1,500 sq ft home or apartment.

Permits

Electrical, plumbing and any wall changes need permits; cosmetic work usually does not.

Frequently asked questions

How much does a whole-home renovation cost in Rhode Island?

A typical whole-home renovation in Rhode Island costs about $109,261, with most projects between $96,150 and $125,650. Economy finishes start around $90,152 and premium projects reach $156,092. That is about $99 per sq ft.

How much of the cost is labor?

Labor is about 46% of the direct cost (604 work hours) for a typical project in Rhode Island. Materials are $41,421 and equipment, disposal and permits $4,393, before contingency, contractor overhead and tax.

Is a whole-home renovation cheaper in Rhode Island than in nearby states?

A typical whole-home renovation costs $109,261 in Rhode Island. Among nearby states, Connecticut is the lowest at $112,125 and Massachusetts the highest at $121,262. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Rhode Island?

Licensing rules in Rhode Island depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.

How long does a whole-home renovation take?

2–4 months for a 1,000–1,500 sq ft home or apartment.

Do I need a permit for a whole-home renovation?

Electrical, plumbing and any wall changes need permits; cosmetic work usually does not.

How much does it cost to renovate per square foot?

See the cost per square foot under the total. It depends mostly on the starting condition and finish package.

What should I renovate first?

Infrastructure first (wiring, plumbing, heating, windows), then walls and floors, then finishes and fixtures.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Whole-Home Renovation cost in other states

Compare whole-home renovation costs in every state, province and territory →

More cost calculators for Rhode Island

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming