Whole-Home Renovation Cost Calculator — Connecticut
Average whole-home renovation cost in Connecticut: $112,125 (typical range $98,670–$128,944, $102 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Connecticut pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a whole-home renovation cost in Connecticut?
Based on current Connecticut labor rates and material prices, a typical whole-home renovation costs about $112,125. Most projects fall between $98,670 and $128,944, or roughly $102 per sq ft. This example assumes: floor area 1,100 sq ft, rooms 4, bathrooms 2, condition Bare shell (new build, nothing inside).
Cost by finish level
| Finish level | Estimated cost | Typical range |
|---|---|---|
| Economy (budget) | $92,746 | $81,616 – $106,658 |
| Standard (mid-range) | $112,125 | $98,670 – $128,944 |
| Premium (high-end) | $159,618 | $140,464 – $183,561 |
Cost by project size
| Project size | Estimated cost |
|---|---|
| 600 sq ft, 2 rooms, 1 bathrooms | $67,969 |
| 1,100 sq ft, 4 rooms, 2 bathrooms | $112,125 |
| 2,000 sq ft, 6 rooms, 3 bathrooms | $173,617 |
Where the money goes
- Bathroom & kitchen fixtures$18,743 (22%)
- Wall plastering & floor screed$10,165 (12%)
- Partition walls$9,539 (11%)
- Tile$8,862 (10%)
- Painting$6,543 (8%)
- Electrical wiring$6,360 (7%)
- Electrical fixtures & lighting$5,177 (6%)
- Doors & trim$4,483 (5%)
Materials $42,212 · Labor $39,829 (604 hours) · Equipment, disposal & permits $4,477 — before contingency, contractor overhead & profit and tax.
Connecticut vs. United States average
A typical whole-home renovation in Connecticut costs 7% more than the United States average ($112,125 vs. $104,819). The difference comes mainly from local wages — a carpenter earns on average $33.02 per hour in Connecticut — and from regional material prices and Sales tax (materials) of 6.35%.
Whole-Home Renovation in Connecticut: local factors
Connecticut ranks 12th of 51 states for whole-home renovation cost (1 = most expensive) — among the most expensive.
| Nearby state | Typical cost | vs. Connecticut |
|---|---|---|
| Connecticut | $112,125 | — |
| Massachusetts | $121,262 | +8% |
| New York | $118,979 | +6% |
| Rhode Island | $109,261 | -3% |
Permits & contractor licensing in Connecticut
- Contractor license: Licensing rules in Connecticut depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in Connecticut are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Connecticut
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Brick / block mason | 99 | $34.42 | $68.84 |
| Electrician | 98 | $37.21 | $74.42 |
| Drywall installer | 94 | $29.33 | $58.66 |
| Tile & stone setter | 83 | $33.21 | $66.42 |
| Painter | 80 | $30.53 | $61.06 |
| Plumber | 67 | $36.25 | $72.50 |
| Carpenter | 39 | $33.02 | $66.04 |
| Floor layer | 22 | $25.43 | $50.86 |
| Cement mason / concrete finisher | 22 | $29.37 | $58.74 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a whole-home renovation includes
A whole-home renovation covers everything inside: walls, electrical and plumbing rough-in, heating, plaster, screed, drywall, waterproofing, tile, paint, flooring, doors, lighting and bathroom fixtures. Starting from a bare shell costs the most; a cosmetic refresh the least.
Main cost factors
- Floor area and number of rooms
- Starting condition (shell, dated, good)
- Number of bathrooms
- Finish package
- Electrical, plumbing and heating scope
How to save money
- Finish all “wet” work (plaster, screed, tile) before flooring and paint.
- Buy tile, flooring and doors early — delivery delays stop the whole job.
- Keep 10% of the budget for surprises behind walls.
- Electrical and plumbing points are cheaper to add before plastering than later.
Timeline
2–4 months for a 1,000–1,500 sq ft home or apartment.
Permits
Electrical, plumbing and any wall changes need permits; cosmetic work usually does not.
Frequently asked questions
How much does a whole-home renovation cost in Connecticut?
A typical whole-home renovation in Connecticut costs about $112,125, with most projects between $98,670 and $128,944. Economy finishes start around $92,746 and premium projects reach $159,618. That is about $102 per sq ft.
How much of the cost is labor?
Labor is about 46% of the direct cost (604 work hours) for a typical project in Connecticut. Materials are $42,212 and equipment, disposal and permits $4,477, before contingency, contractor overhead and tax.
Is a whole-home renovation cheaper in Connecticut than in nearby states?
A typical whole-home renovation costs $112,125 in Connecticut. Among nearby states, Rhode Island is the lowest at $109,261 and Massachusetts the highest at $121,262. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Connecticut?
Licensing rules in Connecticut depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
How long does a whole-home renovation take?
2–4 months for a 1,000–1,500 sq ft home or apartment.
Do I need a permit for a whole-home renovation?
Electrical, plumbing and any wall changes need permits; cosmetic work usually does not.
How much does it cost to renovate per square foot?
See the cost per square foot under the total. It depends mostly on the starting condition and finish package.
What should I renovate first?
Infrastructure first (wiring, plumbing, heating, windows), then walls and floors, then finishes and fixtures.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Whole-Home Renovation cost in other states
Compare whole-home renovation costs in every state, province and territory →