Whole-Home Renovation Cost Calculator — California

Average whole-home renovation cost in California: $118,158 (typical range $103,979–$135,882, $107 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from California pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a whole-home renovation cost in California?

Based on current California labor rates and material prices, a typical whole-home renovation costs about $118,158. Most projects fall between $103,979 and $135,882, or roughly $107 per sq ft. This example assumes: floor area 1,100 sq ft, rooms 4, bathrooms 2, condition Bare shell (new build, nothing inside).

Cost by finish level

Finish levelEstimated costTypical range
Economy (budget)$98,100$86,328 – $112,815
Standard (mid-range)$118,158$103,979 – $135,882
Premium (high-end)$167,313$147,235 – $192,410

Cost by project size

Project sizeEstimated cost
600 sq ft, 2 rooms, 1 bathrooms$71,645
1,100 sq ft, 4 rooms, 2 bathrooms$118,158
2,000 sq ft, 6 rooms, 3 bathrooms$183,140

Where the money goes

  • Bathroom & kitchen fixtures$19,490 (21%)
  • Wall plastering & floor screed$11,441 (13%)
  • Partition walls$9,760 (11%)
  • Tile$8,600 (9%)
  • Electrical wiring$6,941 (8%)
  • Painting$6,509 (7%)
  • Electrical fixtures & lighting$5,511 (6%)
  • Flooring$4,901 (5%)

Materials $43,395 · Labor $42,921 (604 hours) · Equipment, disposal & permits $4,603 — before contingency, contractor overhead & profit and tax.

California vs. United States average

A typical whole-home renovation in California costs 13% more than the United States average ($118,158 vs. $104,819). The difference comes mainly from local wages — a carpenter earns on average $37.89 per hour in California — and from regional material prices and Sales tax (materials) of 7.25%.

Whole-Home Renovation in California: local factors

California ranks 8th of 51 states for whole-home renovation cost (1 = most expensive) — among the most expensive.

Nearby stateTypical costvs. California
California$118,158—
Arizona$99,488-16%
Nevada$107,965-9%
Oregon$114,212-3%

What affects the price in California

  • Earthquake zone: Older homes are often retrofitted (foundation bolting, cripple-wall bracing) during a major remodel; some cities offer incentives.

Permits & contractor licensing in California

  • Contractor license: Any job worth $1,000 or more (labor plus materials) must be done by a contractor licensed by the Contractors State License Board (CSLB). Check the license number on the CSLB website before signing.
  • Building code: Work must meet the California Residential Code and the Title 24 energy standards (2025 edition in effect since January 1, 2026), including seismic and, in fire-hazard zones, wildland–urban interface rules.
  • Permits: Permits come from the city or county building department; remodels that add electrical circuits, move plumbing or change structure need one. Energy-code (Title 24) compliance forms are often required.

Verify a contractor: Contractors State License Board (CSLB) ↗. Rules change — always confirm with your local building department.

Labor rates for this project in California

TradeHoursAvg. wage / hourInstalled rate / hour
Brick / block mason99$35.15$70.30
Electrician98$41.28$82.56
Drywall installer94$35.91$71.82
Tile & stone setter83$30.67$61.34
Painter80$30.03$60.06
Plumber67$39.58$79.16
Carpenter39$37.89$75.78
Floor layer22$33.99$67.98
Cement mason / concrete finisher22$34.09$68.18
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a whole-home renovation includes

A whole-home renovation covers everything inside: walls, electrical and plumbing rough-in, heating, plaster, screed, drywall, waterproofing, tile, paint, flooring, doors, lighting and bathroom fixtures. Starting from a bare shell costs the most; a cosmetic refresh the least.

Main cost factors

  • Floor area and number of rooms
  • Starting condition (shell, dated, good)
  • Number of bathrooms
  • Finish package
  • Electrical, plumbing and heating scope

How to save money

  • Finish all “wet” work (plaster, screed, tile) before flooring and paint.
  • Buy tile, flooring and doors early — delivery delays stop the whole job.
  • Keep 10% of the budget for surprises behind walls.
  • Electrical and plumbing points are cheaper to add before plastering than later.

Timeline

2–4 months for a 1,000–1,500 sq ft home or apartment.

Permits

Electrical, plumbing and any wall changes need permits; cosmetic work usually does not.

Frequently asked questions

How much does a whole-home renovation cost in California?

A typical whole-home renovation in California costs about $118,158, with most projects between $103,979 and $135,882. Economy finishes start around $98,100 and premium projects reach $167,313. That is about $107 per sq ft.

How much of the cost is labor?

Labor is about 47% of the direct cost (604 work hours) for a typical project in California. Materials are $43,395 and equipment, disposal and permits $4,603, before contingency, contractor overhead and tax.

Is a whole-home renovation cheaper in California than in nearby states?

A typical whole-home renovation costs $118,158 in California. Among nearby states, Arizona is the lowest at $99,488 and Oregon the highest at $114,212. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in California?

Any job worth $1,000 or more (labor plus materials) must be done by a contractor licensed by the Contractors State License Board (CSLB). Check the license number on the CSLB website before signing.

What local conditions affect whole-home renovation costs in California?

Older homes are often retrofitted (foundation bolting, cripple-wall bracing) during a major remodel; some cities offer incentives.

How long does a whole-home renovation take?

2–4 months for a 1,000–1,500 sq ft home or apartment.

Do I need a permit for a whole-home renovation?

Electrical, plumbing and any wall changes need permits; cosmetic work usually does not.

How much does it cost to renovate per square foot?

See the cost per square foot under the total. It depends mostly on the starting condition and finish package.

What should I renovate first?

Infrastructure first (wiring, plumbing, heating, windows), then walls and floors, then finishes and fixtures.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Whole-Home Renovation cost in other states

Compare whole-home renovation costs in every state, province and territory →

More cost calculators for California

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming