Whole-Home Renovation Cost Calculator — Washington
Average whole-home renovation cost in Washington: $121,646 (typical range $107,048–$139,893, $111 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
How much does a whole-home renovation cost in Washington?
Based on current Washington labor rates and material prices, a typical whole-home renovation costs about $121,646. Most projects fall between $107,048 and $139,893, or roughly $111 per sq ft. This example assumes: floor area 1,100 sq ft, rooms 4, bathrooms 2, condition Bare shell (new build, nothing inside).
Cost by finish level
| Finish level | Estimated cost | Typical range |
|---|---|---|
| Economy (budget) | $102,245 | $89,976 – $117,582 |
| Standard (mid-range) | $121,646 | $107,048 – $139,893 |
| Premium (high-end) | $169,193 | $148,890 – $194,572 |
Cost by project size
| Project size | Estimated cost |
|---|---|
| 600 sq ft, 2 rooms, 1 bathrooms | $73,450 |
| 1,100 sq ft, 4 rooms, 2 bathrooms | $121,646 |
| 2,000 sq ft, 6 rooms, 3 bathrooms | $189,136 |
Where the money goes
- Bathroom & kitchen fixtures$19,177 (20%)
- Wall plastering & floor screed$11,937 (13%)
- Partition walls$10,856 (12%)
- Tile$9,568 (10%)
- Electrical wiring$7,453 (8%)
- Painting$6,342 (7%)
- Electrical fixtures & lighting$5,689 (6%)
- Flooring$4,936 (5%)
Materials $42,212 · Labor $47,305 (604 hours) · Equipment, disposal & permits $4,477 — before contingency, contractor overhead & profit and tax.
Washington vs. United States average
A typical whole-home renovation in Washington costs 16% more than the United States average ($121,646 vs. $104,819). The difference comes mainly from local wages — a carpenter earns on average $38.06 per hour in Washington — and from regional material prices and Sales tax (materials) of 6.5%.
Whole-Home Renovation in Washington: local factors
Washington ranks 3rd of 51 states for whole-home renovation cost (1 = most expensive) — among the most expensive.
What affects the price in Washington
- Earthquake zone: Older homes are often retrofitted (foundation bolting, cripple-wall bracing) during a major remodel; some cities offer incentives.
Permits & contractor licensing in Washington
- Contractor license: Contractors must register with the Department of Labor & Industries (bond and insurance required); electricians and plumbers are licensed by L&I.
- Building code: The Washington State Building Code and Washington State Energy Code — one of the strictest energy codes in the US.
- Permits: Permits are issued by the city or county; L&I issues electrical permits in many areas.
Verify a contractor: Washington Department of Labor & Industries ↗. Rules change — always confirm with your local building department.
Labor rates for this project in Washington
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Brick / block mason | 99 | $41.07 | $82.14 |
| Electrician | 98 | $45.42 | $90.84 |
| Drywall installer | 94 | $38.68 | $77.36 |
| Tile & stone setter | 83 | $38.01 | $76.02 |
| Painter | 80 | $29.28 | $58.56 |
| Plumber | 67 | $42.69 | $85.38 |
| Carpenter | 39 | $38.06 | $76.12 |
| Floor layer | 22 | $36.85 | $73.70 |
| Cement mason / concrete finisher | 22 | $39.37 | $78.74 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a whole-home renovation includes
A whole-home renovation covers everything inside: walls, electrical and plumbing rough-in, heating, plaster, screed, drywall, waterproofing, tile, paint, flooring, doors, lighting and bathroom fixtures. Starting from a bare shell costs the most; a cosmetic refresh the least.
Main cost factors
- Floor area and number of rooms
- Starting condition (shell, dated, good)
- Number of bathrooms
- Finish package
- Electrical, plumbing and heating scope
How to save money
- Finish all “wet” work (plaster, screed, tile) before flooring and paint.
- Buy tile, flooring and doors early — delivery delays stop the whole job.
- Keep 10% of the budget for surprises behind walls.
- Electrical and plumbing points are cheaper to add before plastering than later.
Timeline
2–4 months for a 1,000–1,500 sq ft home or apartment.
Permits
Electrical, plumbing and any wall changes need permits; cosmetic work usually does not.
Frequently asked questions
How much does a whole-home renovation cost in Washington?
A typical whole-home renovation in Washington costs about $121,646, with most projects between $107,048 and $139,893. Economy finishes start around $102,245 and premium projects reach $169,193. That is about $111 per sq ft.
How much of the cost is labor?
Labor is about 50% of the direct cost (604 work hours) for a typical project in Washington. Materials are $42,212 and equipment, disposal and permits $4,477, before contingency, contractor overhead and tax.
Is a whole-home renovation cheaper in Washington than in nearby states?
A typical whole-home renovation costs $121,646 in Washington. Among nearby states, Idaho is the lowest at $98,483 and Oregon the highest at $114,212. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Washington?
Contractors must register with the Department of Labor & Industries (bond and insurance required); electricians and plumbers are licensed by L&I.
What local conditions affect whole-home renovation costs in Washington?
Older homes are often retrofitted (foundation bolting, cripple-wall bracing) during a major remodel; some cities offer incentives.
How long does a whole-home renovation take?
2–4 months for a 1,000–1,500 sq ft home or apartment.
Do I need a permit for a whole-home renovation?
Electrical, plumbing and any wall changes need permits; cosmetic work usually does not.
How much does it cost to renovate per square foot?
See the cost per square foot under the total. It depends mostly on the starting condition and finish package.
What should I renovate first?
Infrastructure first (wiring, plumbing, heating, windows), then walls and floors, then finishes and fixtures.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Whole-Home Renovation cost in other states
Compare whole-home renovation costs in every state, province and territory →