Whole-Home Renovation Cost Calculator — South Carolina

Average whole-home renovation cost in South Carolina: $94,281 (typical range $82,967–$108,423, $86 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from South Carolina pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a whole-home renovation cost in South Carolina?

Based on current South Carolina labor rates and material prices, a typical whole-home renovation costs about $94,281. Most projects fall between $82,967 and $108,423, or roughly $86 per sq ft. This example assumes: floor area 1,100 sq ft, rooms 4, bathrooms 2, condition Bare shell (new build, nothing inside).

Cost by finish level

Finish levelEstimated costTypical range
Economy (budget)$76,759$67,548 – $88,273
Standard (mid-range)$94,281$82,967 – $108,423
Premium (high-end)$137,221$120,754 – $157,804

Cost by project size

Project sizeEstimated cost
600 sq ft, 2 rooms, 1 bathrooms$57,325
1,100 sq ft, 4 rooms, 2 bathrooms$94,281
2,000 sq ft, 6 rooms, 3 bathrooms$145,744

Where the money goes

  • Bathroom & kitchen fixtures$16,630 (23%)
  • Wall plastering & floor screed$8,717 (12%)
  • Partition walls$7,534 (10%)
  • Tile$7,388 (10%)
  • Electrical wiring$5,052 (7%)
  • Painting$4,736 (7%)
  • Electrical fixtures & lighting$4,360 (6%)
  • Flooring$4,088 (6%)

Materials $38,266 · Labor $30,391 (604 hours) · Equipment, disposal & permits $4,059 — before contingency, contractor overhead & profit and tax.

South Carolina vs. United States average

A typical whole-home renovation in South Carolina costs 10% less than the United States average ($94,281 vs. $104,819). The difference comes mainly from local wages — a carpenter earns on average $26.61 per hour in South Carolina — and from regional material prices and Sales tax (materials) of 6%.

Whole-Home Renovation in South Carolina: local factors

South Carolina ranks 46th of 51 states for whole-home renovation cost (1 = most expensive) — among the most affordable.

Nearby stateTypical costvs. South Carolina
South Carolina$94,281—
Georgia$95,218+1%
North Carolina$91,963-2%

What affects the price in South Carolina

  • Earthquake zone: Older homes are often retrofitted (foundation bolting, cripple-wall bracing) during a major remodel; some cities offer incentives.

Permits & contractor licensing in South Carolina

  • Contractor license: Licensing rules in South Carolina depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
  • Building code: Building codes in South Carolina are based on the International Residential Code, adopted with local amendments.
  • Permits: Building permits are issued by your city or county building department.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in South Carolina

TradeHoursAvg. wage / hourInstalled rate / hour
Brick / block mason99$25.58$51.16
Electrician98$28.38$56.76
Drywall installer94$23.28$46.56
Tile & stone setter83$25.71$51.42
Painter80$20.22$40.44
Plumber67$26.87$53.74
Carpenter39$26.61$53.22
Floor layer22$24.71$49.42
Cement mason / concrete finisher22$26.03$52.06
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a whole-home renovation includes

A whole-home renovation covers everything inside: walls, electrical and plumbing rough-in, heating, plaster, screed, drywall, waterproofing, tile, paint, flooring, doors, lighting and bathroom fixtures. Starting from a bare shell costs the most; a cosmetic refresh the least.

Main cost factors

  • Floor area and number of rooms
  • Starting condition (shell, dated, good)
  • Number of bathrooms
  • Finish package
  • Electrical, plumbing and heating scope

How to save money

  • Finish all “wet” work (plaster, screed, tile) before flooring and paint.
  • Buy tile, flooring and doors early — delivery delays stop the whole job.
  • Keep 10% of the budget for surprises behind walls.
  • Electrical and plumbing points are cheaper to add before plastering than later.

Timeline

2–4 months for a 1,000–1,500 sq ft home or apartment.

Permits

Electrical, plumbing and any wall changes need permits; cosmetic work usually does not.

Frequently asked questions

How much does a whole-home renovation cost in South Carolina?

A typical whole-home renovation in South Carolina costs about $94,281, with most projects between $82,967 and $108,423. Economy finishes start around $76,759 and premium projects reach $137,221. That is about $86 per sq ft.

How much of the cost is labor?

Labor is about 42% of the direct cost (604 work hours) for a typical project in South Carolina. Materials are $38,266 and equipment, disposal and permits $4,059, before contingency, contractor overhead and tax.

Is a whole-home renovation cheaper in South Carolina than in nearby states?

A typical whole-home renovation costs $94,281 in South Carolina. Among nearby states, North Carolina is the lowest at $91,963 and Georgia the highest at $95,218. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in South Carolina?

Licensing rules in South Carolina depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.

What local conditions affect whole-home renovation costs in South Carolina?

Older homes are often retrofitted (foundation bolting, cripple-wall bracing) during a major remodel; some cities offer incentives.

How long does a whole-home renovation take?

2–4 months for a 1,000–1,500 sq ft home or apartment.

Do I need a permit for a whole-home renovation?

Electrical, plumbing and any wall changes need permits; cosmetic work usually does not.

How much does it cost to renovate per square foot?

See the cost per square foot under the total. It depends mostly on the starting condition and finish package.

What should I renovate first?

Infrastructure first (wiring, plumbing, heating, windows), then walls and floors, then finishes and fixtures.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Whole-Home Renovation cost in other states

Compare whole-home renovation costs in every state, province and territory →

More cost calculators for South Carolina

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming