Swimming Pool Cost Calculator — Maryland
Average swimming pool cost in Maryland: $91,481 (typical range $80,503–$105,203, $179 per sq ft of water surface). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Maryland pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a swimming pool cost in Maryland?
Based on current Maryland labor rates and material prices, a typical swimming pool costs about $91,481. Most projects fall between $80,503 and $105,203, or roughly $179 per sq ft of water surface. This example assumes: pool size 32 ft × 16 ft, water surface 512 sq ft, volume 19,149 gal, type Concrete / gunite.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 24 × 12 ft | $74,028 |
| 32 × 16 ft | $91,481 |
| 40 × 20 ft | $111,421 |
Where the money goes
- Pool structure$34,619 (49%)
- Design, permits & excavation$11,315 (16%)
- Plumbing & equipment$8,423 (12%)
- Safety fence & gate$6,199 (9%)
- Pool deck$5,400 (8%)
- Electrical$3,138 (4%)
- Start-up$1,309 (2%)
Materials $40,353 · Labor $19,159 (340 hours) · Equipment, disposal & permits $10,890 — before contingency, contractor overhead & profit and tax.
Maryland vs. United States average
A typical swimming pool in Maryland costs 0% less than the United States average ($91,481 vs. $91,082). The difference comes mainly from local wages — a carpenter earns on average $33.19 per hour in Maryland — and from regional material prices and Sales tax (materials) of 6%.
Swimming Pool in Maryland: local factors
Maryland ranks 18th of 51 states for swimming pool cost (1 = most expensive) — in the middle.
| Nearby state | Typical cost | vs. Maryland |
|---|---|---|
| Maryland | $91,481 | — |
| Delaware | $89,978 | -2% |
| Pennsylvania | $93,976 | +3% |
| Virginia | $87,515 | -4% |
| West Virginia | $86,181 | -6% |
| District of Columbia | $99,815 | +9% |
Permits & contractor licensing in Maryland
- Contractor license: Licensing rules in Maryland depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in Maryland are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Maryland
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Cement mason / concrete finisher | 114 | $26.13 | $52.26 |
| Brick / block mason | 58 | $27.22 | $54.44 |
| Ironworker / welder | 40 | $32.36 | $64.72 |
| Construction laborer | 32 | $23.24 | $46.48 |
| Plumber | 32 | $35.34 | $70.68 |
| Fence erector | 26 | $23.26 | $46.52 |
| Equipment operator | 22 | $30.52 | $61.04 |
| Electrician | 16 | $36.28 | $72.56 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a swimming pool includes
An in-ground pool includes design and permits, excavation and haul-off, the pool structure, plumbing and equipment, electrical bonding, coping and tile, a deck and a code-compliant safety fence. Concrete pools are the most flexible and most expensive; fiberglass is fastest to install.
Main cost factors
- Pool type and size
- Depth and shape
- Heater and automation
- Deck area and material
- Safety fencing
How to save money
- A simple rectangle costs less than a freeform shape with many curves.
- A variable-speed pump pays for itself in lower electricity bills.
- A heat pump is cheaper to run than a gas heater in warm climates.
- Budget for fencing, landscaping and higher insurance.
Timeline
6–12 weeks for concrete; 3–5 weeks for fiberglass.
Permits
A pool permit, electrical permit and a compliant barrier/fence are required almost everywhere.
Frequently asked questions
How much does a swimming pool cost in Maryland?
A typical swimming pool in Maryland costs about $91,481, with most projects between $80,503 and $105,203. That is about $179 per sq ft of water surface.
How much of the cost is labor?
Labor is about 27% of the direct cost (340 work hours) for a typical project in Maryland. Materials are $40,353 and equipment, disposal and permits $10,890, before contingency, contractor overhead and tax.
Is a swimming pool cheaper in Maryland than in nearby states?
A typical swimming pool costs $91,481 in Maryland. Among nearby states, West Virginia is the lowest at $86,181 and District of Columbia the highest at $99,815. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Maryland?
Licensing rules in Maryland depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
How long does a swimming pool take?
6–12 weeks for concrete; 3–5 weeks for fiberglass.
Do I need a permit for a swimming pool?
A pool permit, electrical permit and a compliant barrier/fence are required almost everywhere.
Concrete, vinyl or fiberglass — which is cheapest?
Vinyl liner pools usually have the lowest upfront cost, concrete the highest. Switch the pool type in the calculator to compare.
What does a pool cost to maintain?
Plan for chemicals, electricity, and periodic resurfacing or liner replacement.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Swimming Pool cost in other states
Compare swimming pool costs in every state, province and territory →