Swimming Pool Cost Calculator — California

Average swimming pool cost in California: $102,593 (typical range $90,282–$117,982, $200 per sq ft of water surface). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from California pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a swimming pool cost in California?

Based on current California labor rates and material prices, a typical swimming pool costs about $102,593. Most projects fall between $90,282 and $117,982, or roughly $200 per sq ft of water surface. This example assumes: pool size 32 ft × 16 ft, water surface 512 sq ft, volume 19,149 gal, type Concrete / gunite.

Cost by project size

Project sizeEstimated cost
24 × 12 ft$82,960
32 × 16 ft$102,593
40 × 20 ft$125,018

Where the money goes

  • Pool structure$39,075 (50%)
  • Design, permits & excavation$12,579 (16%)
  • Plumbing & equipment$9,113 (12%)
  • Safety fence & gate$6,793 (9%)
  • Pool deck$6,138 (8%)
  • Electrical$3,432 (4%)
  • Start-up$1,500 (2%)

Materials $43,097 · Labor $23,904 (340 hours) · Equipment, disposal & permits $11,631 — before contingency, contractor overhead & profit and tax.

California vs. United States average

A typical swimming pool in California costs 13% more than the United States average ($102,593 vs. $91,082). The difference comes mainly from local wages — a carpenter earns on average $37.89 per hour in California — and from regional material prices and Sales tax (materials) of 7.25%.

Swimming Pool in California: local factors

California ranks 6th of 51 states for swimming pool cost (1 = most expensive) — among the most expensive.

Nearby stateTypical costvs. California
California$102,593—
Arizona$88,878-13%
Nevada$93,977-8%
Oregon$96,675-6%

What affects the price in California

  • Earthquake zone: Pool shells and nearby retaining walls must be engineered for seismic loads.

Permits & contractor licensing in California

  • Contractor license: Any job worth $1,000 or more (labor plus materials) must be done by a contractor licensed by the Contractors State License Board (CSLB). Check the license number on the CSLB website before signing.
  • Building code: Work must meet the California Residential Code and the Title 24 energy standards (2025 edition in effect since January 1, 2026), including seismic and, in fire-hazard zones, wildland–urban interface rules.
  • Permits: Permits come from the city or county building department; remodels that add electrical circuits, move plumbing or change structure need one. Energy-code (Title 24) compliance forms are often required.

Verify a contractor: Contractors State License Board (CSLB) ↗. Rules change — always confirm with your local building department.

Labor rates for this project in California

TradeHoursAvg. wage / hourInstalled rate / hour
Cement mason / concrete finisher114$34.09$68.18
Brick / block mason58$35.15$70.30
Ironworker / welder40$39.10$78.20
Construction laborer32$31.19$62.38
Plumber32$39.58$79.16
Fence erector26$28.11$56.22
Equipment operator22$36.88$73.76
Electrician16$41.28$82.56
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a swimming pool includes

An in-ground pool includes design and permits, excavation and haul-off, the pool structure, plumbing and equipment, electrical bonding, coping and tile, a deck and a code-compliant safety fence. Concrete pools are the most flexible and most expensive; fiberglass is fastest to install.

Main cost factors

  • Pool type and size
  • Depth and shape
  • Heater and automation
  • Deck area and material
  • Safety fencing

How to save money

  • A simple rectangle costs less than a freeform shape with many curves.
  • A variable-speed pump pays for itself in lower electricity bills.
  • A heat pump is cheaper to run than a gas heater in warm climates.
  • Budget for fencing, landscaping and higher insurance.

Timeline

6–12 weeks for concrete; 3–5 weeks for fiberglass.

Permits

A pool permit, electrical permit and a compliant barrier/fence are required almost everywhere.

Frequently asked questions

How much does a swimming pool cost in California?

A typical swimming pool in California costs about $102,593, with most projects between $90,282 and $117,982. That is about $200 per sq ft of water surface.

How much of the cost is labor?

Labor is about 30% of the direct cost (340 work hours) for a typical project in California. Materials are $43,097 and equipment, disposal and permits $11,631, before contingency, contractor overhead and tax.

Is a swimming pool cheaper in California than in nearby states?

A typical swimming pool costs $102,593 in California. Among nearby states, Arizona is the lowest at $88,878 and Oregon the highest at $96,675. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in California?

Any job worth $1,000 or more (labor plus materials) must be done by a contractor licensed by the Contractors State License Board (CSLB). Check the license number on the CSLB website before signing.

What local conditions affect swimming pool costs in California?

Pool shells and nearby retaining walls must be engineered for seismic loads.

How long does a swimming pool take?

6–12 weeks for concrete; 3–5 weeks for fiberglass.

Do I need a permit for a swimming pool?

A pool permit, electrical permit and a compliant barrier/fence are required almost everywhere.

Concrete, vinyl or fiberglass — which is cheapest?

Vinyl liner pools usually have the lowest upfront cost, concrete the highest. Switch the pool type in the calculator to compare.

What does a pool cost to maintain?

Plan for chemicals, electricity, and periodic resurfacing or liner replacement.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Swimming Pool cost in other states

Compare swimming pool costs in every state, province and territory →

More cost calculators for California

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming