Swimming Pool Cost Calculator — Washington
Average swimming pool cost in Washington: $103,544 (typical range $91,119–$119,076, $202 per sq ft of water surface). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
How much does a swimming pool cost in Washington?
Based on current Washington labor rates and material prices, a typical swimming pool costs about $103,544. Most projects fall between $91,119 and $119,076, or roughly $202 per sq ft of water surface. This example assumes: pool size 32 ft × 16 ft, water surface 512 sq ft, volume 19,149 gal, type Concrete / gunite.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 24 × 12 ft | $83,615 |
| 32 × 16 ft | $103,544 |
| 40 × 20 ft | $126,304 |
Where the money goes
- Pool structure$40,159 (50%)
- Design, permits & excavation$12,356 (16%)
- Plumbing & equipment$9,133 (11%)
- Safety fence & gate$6,755 (8%)
- Pool deck$6,343 (8%)
- Electrical$3,507 (4%)
- Start-up$1,446 (2%)
Materials $41,921 · Labor $26,464 (340 hours) · Equipment, disposal & permits $11,314 — before contingency, contractor overhead & profit and tax.
Washington vs. United States average
A typical swimming pool in Washington costs 14% more than the United States average ($103,544 vs. $91,082). The difference comes mainly from local wages — a carpenter earns on average $38.06 per hour in Washington — and from regional material prices and Sales tax (materials) of 6.5%.
Swimming Pool in Washington: local factors
Washington ranks 4th of 51 states for swimming pool cost (1 = most expensive) — among the most expensive.
What affects the price in Washington
- Earthquake zone: Pool shells and nearby retaining walls must be engineered for seismic loads.
Permits & contractor licensing in Washington
- Contractor license: Contractors must register with the Department of Labor & Industries (bond and insurance required); electricians and plumbers are licensed by L&I.
- Building code: The Washington State Building Code and Washington State Energy Code — one of the strictest energy codes in the US.
- Permits: Permits are issued by the city or county; L&I issues electrical permits in many areas.
Verify a contractor: Washington Department of Labor & Industries ↗. Rules change — always confirm with your local building department.
Labor rates for this project in Washington
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Cement mason / concrete finisher | 114 | $39.37 | $78.74 |
| Brick / block mason | 58 | $41.07 | $82.14 |
| Ironworker / welder | 40 | $41.93 | $83.86 |
| Construction laborer | 32 | $29.48 | $58.96 |
| Plumber | 32 | $42.69 | $85.38 |
| Fence erector | 26 | $30.14 | $60.28 |
| Equipment operator | 22 | $39.55 | $79.10 |
| Electrician | 16 | $45.42 | $90.84 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a swimming pool includes
An in-ground pool includes design and permits, excavation and haul-off, the pool structure, plumbing and equipment, electrical bonding, coping and tile, a deck and a code-compliant safety fence. Concrete pools are the most flexible and most expensive; fiberglass is fastest to install.
Main cost factors
- Pool type and size
- Depth and shape
- Heater and automation
- Deck area and material
- Safety fencing
How to save money
- A simple rectangle costs less than a freeform shape with many curves.
- A variable-speed pump pays for itself in lower electricity bills.
- A heat pump is cheaper to run than a gas heater in warm climates.
- Budget for fencing, landscaping and higher insurance.
Timeline
6–12 weeks for concrete; 3–5 weeks for fiberglass.
Permits
A pool permit, electrical permit and a compliant barrier/fence are required almost everywhere.
Frequently asked questions
How much does a swimming pool cost in Washington?
A typical swimming pool in Washington costs about $103,544, with most projects between $91,119 and $119,076. That is about $202 per sq ft of water surface.
How much of the cost is labor?
Labor is about 33% of the direct cost (340 work hours) for a typical project in Washington. Materials are $41,921 and equipment, disposal and permits $11,314, before contingency, contractor overhead and tax.
Is a swimming pool cheaper in Washington than in nearby states?
A typical swimming pool costs $103,544 in Washington. Among nearby states, Idaho is the lowest at $88,992 and Oregon the highest at $96,675. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Washington?
Contractors must register with the Department of Labor & Industries (bond and insurance required); electricians and plumbers are licensed by L&I.
What local conditions affect swimming pool costs in Washington?
Pool shells and nearby retaining walls must be engineered for seismic loads.
How long does a swimming pool take?
6–12 weeks for concrete; 3–5 weeks for fiberglass.
Do I need a permit for a swimming pool?
A pool permit, electrical permit and a compliant barrier/fence are required almost everywhere.
Concrete, vinyl or fiberglass — which is cheapest?
Vinyl liner pools usually have the lowest upfront cost, concrete the highest. Switch the pool type in the calculator to compare.
What does a pool cost to maintain?
Plan for chemicals, electricity, and periodic resurfacing or liner replacement.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Swimming Pool cost in other states
Compare swimming pool costs in every state, province and territory →