Swimming Pool Cost Calculator — Connecticut
Average swimming pool cost in Connecticut: $97,515 (typical range $85,813–$112,142, $190 per sq ft of water surface). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Connecticut pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a swimming pool cost in Connecticut?
Based on current Connecticut labor rates and material prices, a typical swimming pool costs about $97,515. Most projects fall between $85,813 and $112,142, or roughly $190 per sq ft of water surface. This example assumes: pool size 32 ft × 16 ft, water surface 512 sq ft, volume 19,149 gal, type Concrete / gunite.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 24 × 12 ft | $78,852 |
| 32 × 16 ft | $97,515 |
| 40 × 20 ft | $118,818 |
Where the money goes
- Pool structure$37,244 (50%)
- Design, permits & excavation$12,067 (16%)
- Plumbing & equipment$8,721 (12%)
- Safety fence & gate$6,534 (9%)
- Pool deck$5,743 (8%)
- Electrical$3,245 (4%)
- Start-up$1,430 (2%)
Materials $41,921 · Labor $21,748 (340 hours) · Equipment, disposal & permits $11,314 — before contingency, contractor overhead & profit and tax.
Connecticut vs. United States average
A typical swimming pool in Connecticut costs 7% more than the United States average ($97,515 vs. $91,082). The difference comes mainly from local wages — a carpenter earns on average $33.02 per hour in Connecticut — and from regional material prices and Sales tax (materials) of 6.35%.
Swimming Pool in Connecticut: local factors
Connecticut ranks 12th of 51 states for swimming pool cost (1 = most expensive) — among the most expensive.
| Nearby state | Typical cost | vs. Connecticut |
|---|---|---|
| Connecticut | $97,515 | — |
| Massachusetts | $104,026 | +7% |
| New York | $102,791 | +5% |
| Rhode Island | $97,980 | 0% |
Permits & contractor licensing in Connecticut
- Contractor license: Licensing rules in Connecticut depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in Connecticut are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Connecticut
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Cement mason / concrete finisher | 114 | $29.37 | $58.74 |
| Brick / block mason | 58 | $34.42 | $68.84 |
| Ironworker / welder | 40 | $36.10 | $72.20 |
| Construction laborer | 32 | $28.49 | $56.98 |
| Plumber | 32 | $36.25 | $72.50 |
| Fence erector | 26 | $25.95 | $51.90 |
| Equipment operator | 22 | $34.05 | $68.10 |
| Electrician | 16 | $37.21 | $74.42 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a swimming pool includes
An in-ground pool includes design and permits, excavation and haul-off, the pool structure, plumbing and equipment, electrical bonding, coping and tile, a deck and a code-compliant safety fence. Concrete pools are the most flexible and most expensive; fiberglass is fastest to install.
Main cost factors
- Pool type and size
- Depth and shape
- Heater and automation
- Deck area and material
- Safety fencing
How to save money
- A simple rectangle costs less than a freeform shape with many curves.
- A variable-speed pump pays for itself in lower electricity bills.
- A heat pump is cheaper to run than a gas heater in warm climates.
- Budget for fencing, landscaping and higher insurance.
Timeline
6–12 weeks for concrete; 3–5 weeks for fiberglass.
Permits
A pool permit, electrical permit and a compliant barrier/fence are required almost everywhere.
Frequently asked questions
How much does a swimming pool cost in Connecticut?
A typical swimming pool in Connecticut costs about $97,515, with most projects between $85,813 and $112,142. That is about $190 per sq ft of water surface.
How much of the cost is labor?
Labor is about 29% of the direct cost (340 work hours) for a typical project in Connecticut. Materials are $41,921 and equipment, disposal and permits $11,314, before contingency, contractor overhead and tax.
Is a swimming pool cheaper in Connecticut than in nearby states?
A typical swimming pool costs $97,515 in Connecticut. Among nearby states, Rhode Island is the lowest at $97,980 and Massachusetts the highest at $104,026. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Connecticut?
Licensing rules in Connecticut depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
How long does a swimming pool take?
6–12 weeks for concrete; 3–5 weeks for fiberglass.
Do I need a permit for a swimming pool?
A pool permit, electrical permit and a compliant barrier/fence are required almost everywhere.
Concrete, vinyl or fiberglass — which is cheapest?
Vinyl liner pools usually have the lowest upfront cost, concrete the highest. Switch the pool type in the calculator to compare.
What does a pool cost to maintain?
Plan for chemicals, electricity, and periodic resurfacing or liner replacement.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Swimming Pool cost in other states
Compare swimming pool costs in every state, province and territory →