Wood & Vinyl Fence Cost Calculator — Iowa

Average wood & vinyl fence cost in Iowa: $6,800 (typical range $5,984–$7,820, $45 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Iowa pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a wood & vinyl fence cost in Iowa?

Based on current Iowa labor rates and material prices, a typical wood & vinyl fence costs about $6,800. Most projects fall between $5,984 and $7,820, or roughly $45 per linear foot. This example assumes: length 150 ft, height 6 ft, material Pressure-treated pine, posts 21.

Cost by project size

Project sizeEstimated cost
75 ft$3,941
150 ft$6,800
300 ft$12,620

Where the money goes

  • Rails & panels$3,263 (62%)
  • Posts & footings$1,292 (25%)
  • Gates$362 (7%)
  • Permit & utility locate$333 (6%)

Materials $2,669 · Labor $2,451 (54 hours) · Equipment, disposal & permits $129 — before contingency, contractor overhead & profit and tax.

Iowa vs. United States average

A typical wood & vinyl fence in Iowa costs 4% less than the United States average ($6,800 vs. $7,078). The difference comes mainly from local wages — a carpenter earns on average $27.71 per hour in Iowa — and from regional material prices and Sales tax (materials) of 6%.

Wood & Vinyl Fence in Iowa: local factors

Iowa ranks 29th of 51 states for wood & vinyl fence cost (1 = most expensive) — in the middle.

Nearby stateTypical costvs. Iowa
Iowa$6,800—
Illinois$8,084+19%
Minnesota$7,779+14%
Missouri$7,084+4%
Nebraska$6,616-3%
South Dakota$6,505-4%
Wisconsin$7,277+7%

What affects the price in Iowa

  • Moderate frost: Posts and footings typically go 24–42 in. (0.6–1.1 m) deep to stay below the frost line.

Permits & contractor licensing in Iowa

  • Contractor license: Licensing rules in Iowa depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
  • Building code: Building codes in Iowa are based on the International Residential Code, adopted with local amendments.
  • Permits: Building permits are issued by your city or county building department.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Iowa

TradeHoursAvg. wage / hourInstalled rate / hour
Fence erector54$22.63$45.26
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a wood & vinyl fence includes

Fence cost is driven by length, height, material and gates. Posts set in concrete every 8 ft, rails and pickets or panels make up the materials; labor is mostly digging and setting posts.

Main cost factors

  • Fence length and height
  • Material (pine, cedar, vinyl)
  • Style
  • Number of gates
  • Old fence removal

How to save money

  • Pressure-treated pine is the cheapest; cedar resists rot naturally.
  • Vinyl costs more up front but never needs staining.
  • Share the cost with neighbors on property-line fences.
  • Call your utility locate service before digging.

Timeline

2–4 days for 150 ft.

Permits

Many cities require a permit for fences over 6 ft; HOAs may have style rules.

Frequently asked questions

How much does a wood & vinyl fence cost in Iowa?

A typical wood & vinyl fence in Iowa costs about $6,800, with most projects between $5,984 and $7,820. That is about $45 per linear foot.

How much of the cost is labor?

Labor is about 47% of the direct cost (54 work hours) for a typical project in Iowa. Materials are $2,669 and equipment, disposal and permits $129, before contingency, contractor overhead and tax.

Is a wood & vinyl fence cheaper in Iowa than in nearby states?

A typical wood & vinyl fence costs $6,800 in Iowa. Among nearby states, South Dakota is the lowest at $6,505 and Illinois the highest at $8,084. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Iowa?

Licensing rules in Iowa depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.

What local conditions affect wood & vinyl fence costs in Iowa?

Posts and footings typically go 24–42 in. (0.6–1.1 m) deep to stay below the frost line.

How long does a wood & vinyl fence take?

2–4 days for 150 ft.

Do I need a permit for a wood & vinyl fence?

Many cities require a permit for fences over 6 ft; HOAs may have style rules.

How much does a fence cost per foot?

See the cost per linear foot (or metre) under the total.

How long does a wood fence last?

10–15 years for treated pine, 15–20 for cedar with regular sealing.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Wood & Vinyl Fence cost in other states

Compare wood & vinyl fence costs in every state, province and territory →

More cost calculators for Iowa

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming