Wood & Vinyl Fence Cost Calculator — New Mexico
Average wood & vinyl fence cost in New Mexico: $6,473 (typical range $5,696–$7,444, $43 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from New Mexico pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a wood & vinyl fence cost in New Mexico?
Based on current New Mexico labor rates and material prices, a typical wood & vinyl fence costs about $6,473. Most projects fall between $5,696 and $7,444, or roughly $43 per linear foot. This example assumes: length 150 ft, height 6 ft, material Pressure-treated pine, posts 21.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 75 ft | $3,754 |
| 150 ft | $6,473 |
| 300 ft | $12,008 |
Where the money goes
- Rails & panels$3,120 (62%)
- Posts & footings$1,232 (25%)
- Gates$349 (7%)
- Permit & utility locate$312 (6%)
Materials $2,696 · Labor $2,187 (54 hours) · Equipment, disposal & permits $130 — before contingency, contractor overhead & profit and tax.
New Mexico vs. United States average
A typical wood & vinyl fence in New Mexico costs 9% less than the United States average ($6,473 vs. $7,078). The difference comes mainly from local wages — a carpenter earns on average $27.61 per hour in New Mexico — and from regional material prices and Sales tax (materials) of 4.875%.
Wood & Vinyl Fence in New Mexico: local factors
New Mexico ranks 41st of 51 states for wood & vinyl fence cost (1 = most expensive) — among the most affordable.
| Nearby state | Typical cost | vs. New Mexico |
|---|---|---|
| New Mexico | $6,473 | — |
| Arizona | $6,718 | +4% |
| Colorado | $7,037 | +9% |
| Oklahoma | $6,308 | -3% |
| Texas | $6,414 | -1% |
| Utah | $6,694 | +3% |
What affects the price in New Mexico
- Moderate frost: Posts and footings typically go 24–42 in. (0.6–1.1 m) deep to stay below the frost line.
- Wildfire risk: Decks and fences attached to the house may need ignition-resistant or non-combustible materials near the walls.
Permits & contractor licensing in New Mexico
- Contractor license: Licensing rules in New Mexico depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in New Mexico are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in New Mexico
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Fence erector | 54 | $20.19 | $40.38 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a wood & vinyl fence includes
Fence cost is driven by length, height, material and gates. Posts set in concrete every 8 ft, rails and pickets or panels make up the materials; labor is mostly digging and setting posts.
Main cost factors
- Fence length and height
- Material (pine, cedar, vinyl)
- Style
- Number of gates
- Old fence removal
How to save money
- Pressure-treated pine is the cheapest; cedar resists rot naturally.
- Vinyl costs more up front but never needs staining.
- Share the cost with neighbors on property-line fences.
- Call your utility locate service before digging.
Timeline
2–4 days for 150 ft.
Permits
Many cities require a permit for fences over 6 ft; HOAs may have style rules.
Frequently asked questions
How much does a wood & vinyl fence cost in New Mexico?
A typical wood & vinyl fence in New Mexico costs about $6,473, with most projects between $5,696 and $7,444. That is about $43 per linear foot.
How much of the cost is labor?
Labor is about 44% of the direct cost (54 work hours) for a typical project in New Mexico. Materials are $2,696 and equipment, disposal and permits $130, before contingency, contractor overhead and tax.
Is a wood & vinyl fence cheaper in New Mexico than in nearby states?
A typical wood & vinyl fence costs $6,473 in New Mexico. Among nearby states, Oklahoma is the lowest at $6,308 and Colorado the highest at $7,037. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in New Mexico?
Licensing rules in New Mexico depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
What local conditions affect wood & vinyl fence costs in New Mexico?
Posts and footings typically go 24–42 in. (0.6–1.1 m) deep to stay below the frost line. Decks and fences attached to the house may need ignition-resistant or non-combustible materials near the walls.
How long does a wood & vinyl fence take?
2–4 days for 150 ft.
Do I need a permit for a wood & vinyl fence?
Many cities require a permit for fences over 6 ft; HOAs may have style rules.
How much does a fence cost per foot?
See the cost per linear foot (or metre) under the total.
How long does a wood fence last?
10–15 years for treated pine, 15–20 for cedar with regular sealing.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Wood & Vinyl Fence cost in other states
Compare wood & vinyl fence costs in every state, province and territory →