Wood & Vinyl Fence Cost Calculator — California

Average wood & vinyl fence cost in California: $8,041 (typical range $7,076–$9,247, $54 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from California pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a wood & vinyl fence cost in California?

Based on current California labor rates and material prices, a typical wood & vinyl fence costs about $8,041. Most projects fall between $7,076 and $9,247, or roughly $54 per linear foot. This example assumes: length 150 ft, height 6 ft, material Pressure-treated pine, posts 21.

Cost by project size

Project sizeEstimated cost
75 ft$4,657
150 ft$8,041
300 ft$14,928

Where the money goes

  • Rails & panels$3,841 (62%)
  • Posts & footings$1,524 (25%)
  • Gates$422 (7%)
  • Permit & utility locate$398 (6%)

Materials $2,996 · Labor $3,044 (54 hours) · Equipment, disposal & permits $145 — before contingency, contractor overhead & profit and tax.

California vs. United States average

A typical wood & vinyl fence in California costs 14% more than the United States average ($8,041 vs. $7,078). The difference comes mainly from local wages — a carpenter earns on average $37.89 per hour in California — and from regional material prices and Sales tax (materials) of 7.25%.

Wood & Vinyl Fence in California: local factors

California ranks 7th of 51 states for wood & vinyl fence cost (1 = most expensive) — among the most expensive.

Nearby stateTypical costvs. California
California$8,041—
Arizona$6,718-16%
Nevada$7,312-9%
Oregon$7,558-6%

What affects the price in California

  • Wildfire risk: Decks and fences attached to the house may need ignition-resistant or non-combustible materials near the walls.
  • Termites: Use pressure-treated or naturally resistant lumber and keep wood off the soil; new homes need a termite treatment or physical barrier.

Permits & contractor licensing in California

  • Contractor license: Any job worth $1,000 or more (labor plus materials) must be done by a contractor licensed by the Contractors State License Board (CSLB). Check the license number on the CSLB website before signing.
  • Building code: Work must meet the California Residential Code and the Title 24 energy standards (2025 edition in effect since January 1, 2026), including seismic and, in fire-hazard zones, wildland–urban interface rules.
  • Permits: Permits come from the city or county building department; remodels that add electrical circuits, move plumbing or change structure need one. Energy-code (Title 24) compliance forms are often required.

Verify a contractor: Contractors State License Board (CSLB) ↗. Rules change — always confirm with your local building department.

Labor rates for this project in California

TradeHoursAvg. wage / hourInstalled rate / hour
Fence erector54$28.11$56.22
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a wood & vinyl fence includes

Fence cost is driven by length, height, material and gates. Posts set in concrete every 8 ft, rails and pickets or panels make up the materials; labor is mostly digging and setting posts.

Main cost factors

  • Fence length and height
  • Material (pine, cedar, vinyl)
  • Style
  • Number of gates
  • Old fence removal

How to save money

  • Pressure-treated pine is the cheapest; cedar resists rot naturally.
  • Vinyl costs more up front but never needs staining.
  • Share the cost with neighbors on property-line fences.
  • Call your utility locate service before digging.

Timeline

2–4 days for 150 ft.

Permits

Many cities require a permit for fences over 6 ft; HOAs may have style rules.

Frequently asked questions

How much does a wood & vinyl fence cost in California?

A typical wood & vinyl fence in California costs about $8,041, with most projects between $7,076 and $9,247. That is about $54 per linear foot.

How much of the cost is labor?

Labor is about 49% of the direct cost (54 work hours) for a typical project in California. Materials are $2,996 and equipment, disposal and permits $145, before contingency, contractor overhead and tax.

Is a wood & vinyl fence cheaper in California than in nearby states?

A typical wood & vinyl fence costs $8,041 in California. Among nearby states, Arizona is the lowest at $6,718 and Oregon the highest at $7,558. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in California?

Any job worth $1,000 or more (labor plus materials) must be done by a contractor licensed by the Contractors State License Board (CSLB). Check the license number on the CSLB website before signing.

What local conditions affect wood & vinyl fence costs in California?

Decks and fences attached to the house may need ignition-resistant or non-combustible materials near the walls. Use pressure-treated or naturally resistant lumber and keep wood off the soil; new homes need a termite treatment or physical barrier.

How long does a wood & vinyl fence take?

2–4 days for 150 ft.

Do I need a permit for a wood & vinyl fence?

Many cities require a permit for fences over 6 ft; HOAs may have style rules.

How much does a fence cost per foot?

See the cost per linear foot (or metre) under the total.

How long does a wood fence last?

10–15 years for treated pine, 15–20 for cedar with regular sealing.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Wood & Vinyl Fence cost in other states

Compare wood & vinyl fence costs in every state, province and territory →

More cost calculators for California

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming