Wood & Vinyl Fence Cost Calculator — North Carolina
Average wood & vinyl fence cost in North Carolina: $6,288 (typical range $5,533–$7,231, $42 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from North Carolina pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a wood & vinyl fence cost in North Carolina?
Based on current North Carolina labor rates and material prices, a typical wood & vinyl fence costs about $6,288. Most projects fall between $5,533 and $7,231, or roughly $42 per linear foot. This example assumes: length 150 ft, height 6 ft, material Pressure-treated pine, posts 21.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 75 ft | $3,647 |
| 150 ft | $6,288 |
| 300 ft | $11,664 |
Where the money goes
- Rails & panels$3,032 (62%)
- Posts & footings$1,197 (25%)
- Gates$340 (7%)
- Permit & utility locate$302 (6%)
Materials $2,642 · Labor $2,102 (54 hours) · Equipment, disposal & permits $128 — before contingency, contractor overhead & profit and tax.
North Carolina vs. United States average
A typical wood & vinyl fence in North Carolina costs 11% less than the United States average ($6,288 vs. $7,078). The difference comes mainly from local wages — a carpenter earns on average $24.28 per hour in North Carolina — and from regional material prices and Sales tax (materials) of 4.75%.
Wood & Vinyl Fence in North Carolina: local factors
North Carolina ranks 48th of 51 states for wood & vinyl fence cost (1 = most expensive) — among the most affordable.
| Nearby state | Typical cost | vs. North Carolina |
|---|---|---|
| North Carolina | $6,288 | — |
| Georgia | $6,390 | +2% |
| South Carolina | $6,432 | +2% |
| Tennessee | $6,468 | +3% |
| Virginia | $6,661 | +6% |
What affects the price in North Carolina
- Hurricane-force winds: Fences must resist high winds: deeper concrete-set posts, closer post spacing or reinforced masonry.
- Termites: Use pressure-treated or naturally resistant lumber and keep wood off the soil; new homes need a termite treatment or physical barrier.
Permits & contractor licensing in North Carolina
- Contractor license: Projects of $40,000 or more require a license from the NC Licensing Board for General Contractors; electrical, plumbing and HVAC work need separate state licenses.
- Building code: The North Carolina Residential Code applies statewide, enforced by county and city inspection departments.
- Permits: Permits are issued by the county or city inspections department; homeowners may pull permits for work on their own home.
Verify a contractor: NC Licensing Board for General Contractors ↗. Rules change — always confirm with your local building department.
Labor rates for this project in North Carolina
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Fence erector | 54 | $19.41 | $38.82 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a wood & vinyl fence includes
Fence cost is driven by length, height, material and gates. Posts set in concrete every 8 ft, rails and pickets or panels make up the materials; labor is mostly digging and setting posts.
Main cost factors
- Fence length and height
- Material (pine, cedar, vinyl)
- Style
- Number of gates
- Old fence removal
How to save money
- Pressure-treated pine is the cheapest; cedar resists rot naturally.
- Vinyl costs more up front but never needs staining.
- Share the cost with neighbors on property-line fences.
- Call your utility locate service before digging.
Timeline
2–4 days for 150 ft.
Permits
Many cities require a permit for fences over 6 ft; HOAs may have style rules.
Frequently asked questions
How much does a wood & vinyl fence cost in North Carolina?
A typical wood & vinyl fence in North Carolina costs about $6,288, with most projects between $5,533 and $7,231. That is about $42 per linear foot.
How much of the cost is labor?
Labor is about 43% of the direct cost (54 work hours) for a typical project in North Carolina. Materials are $2,642 and equipment, disposal and permits $128, before contingency, contractor overhead and tax.
Is a wood & vinyl fence cheaper in North Carolina than in nearby states?
A typical wood & vinyl fence costs $6,288 in North Carolina. Among nearby states, Georgia is the lowest at $6,390 and Virginia the highest at $6,661. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in North Carolina?
Projects of $40,000 or more require a license from the NC Licensing Board for General Contractors; electrical, plumbing and HVAC work need separate state licenses.
What local conditions affect wood & vinyl fence costs in North Carolina?
Fences must resist high winds: deeper concrete-set posts, closer post spacing or reinforced masonry. Use pressure-treated or naturally resistant lumber and keep wood off the soil; new homes need a termite treatment or physical barrier.
How long does a wood & vinyl fence take?
2–4 days for 150 ft.
Do I need a permit for a wood & vinyl fence?
Many cities require a permit for fences over 6 ft; HOAs may have style rules.
How much does a fence cost per foot?
See the cost per linear foot (or metre) under the total.
How long does a wood fence last?
10–15 years for treated pine, 15–20 for cedar with regular sealing.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Wood & Vinyl Fence cost in other states
Compare wood & vinyl fence costs in every state, province and territory →