Paver Patio Cost Calculator — Iowa
Average paver patio cost in Iowa: $6,105 (typical range $5,372–$7,021, $20 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Iowa pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a paver patio cost in Iowa?
Based on current Iowa labor rates and material prices, a typical paver patio costs about $6,105. Most projects fall between $5,372 and $7,021, or roughly $20 per sq ft. This example assumes: patio area 300 sq ft, paver Concrete pavers, base 6".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 150 sq ft | $3,447 |
| 300 sq ft | $6,105 |
| 600 sq ft | $11,851 |
Where the money goes
- Pavers$2,628 (56%)
- Excavation$1,101 (23%)
- Base$990 (21%)
Materials $2,266 · Labor $1,534 (41 hours) · Equipment, disposal & permits $919 — before contingency, contractor overhead & profit and tax.
Iowa vs. United States average
A typical paver patio in Iowa costs 3% less than the United States average ($6,105 vs. $6,312). The difference comes mainly from local wages — a carpenter earns on average $27.71 per hour in Iowa — and from regional material prices and Sales tax (materials) of 6%.
Paver Patio in Iowa: local factors
Iowa ranks 30th of 51 states for paver patio cost (1 = most expensive) — in the middle.
| Nearby state | Typical cost | vs. Iowa |
|---|---|---|
| Iowa | $6,105 | — |
| Illinois | $7,024 | +15% |
| Minnesota | $6,818 | +12% |
| Missouri | $6,273 | +3% |
| Nebraska | $5,989 | -2% |
| South Dakota | $5,929 | -3% |
| Wisconsin | $6,436 | +5% |
What affects the price in Iowa
- Snow loads: Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.
Permits & contractor licensing in Iowa
- Contractor license: Licensing rules in Iowa depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in Iowa are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Iowa
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Landscaper / hardscape | 41 | $18.94 | $37.88 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a paver patio includes
A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.
Main cost factors
- Patio area
- Paver type
- Base depth
- Borders and edging
- Steps or seat walls
How to save money
- Do not skimp on base depth on clay soils.
- Simple running-bond patterns waste less paver material.
- Permeable pavers can reduce storm-water fees in some cities.
- Seat walls and steps add the most cost per square foot.
Timeline
2–5 days.
Permits
Usually not required for ground-level patios; check lot coverage rules.
Frequently asked questions
How much does a paver patio cost in Iowa?
A typical paver patio in Iowa costs about $6,105, with most projects between $5,372 and $7,021. That is about $20 per sq ft.
How much of the cost is labor?
Labor is about 33% of the direct cost (41 work hours) for a typical project in Iowa. Materials are $2,266 and equipment, disposal and permits $919, before contingency, contractor overhead and tax.
Is a paver patio cheaper in Iowa than in nearby states?
A typical paver patio costs $6,105 in Iowa. Among nearby states, South Dakota is the lowest at $5,929 and Illinois the highest at $7,024. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Iowa?
Licensing rules in Iowa depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
What local conditions affect paver patio costs in Iowa?
Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.
How long does a paver patio take?
2–5 days.
Do I need a permit for a paver patio?
Usually not required for ground-level patios; check lot coverage rules.
How much base gravel do I need?
See the “Base” category for cubic yards for your base depth.
How long do paver patios last?
25–50 years with occasional re-sanding of joints.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Paver Patio cost in other states
Compare paver patio costs in every state, province and territory →