Wood & Vinyl Fence Cost Calculator — Montana
Average wood & vinyl fence cost in Montana: $6,946 (typical range $6,112–$7,988, $46 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Montana pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a wood & vinyl fence cost in Montana?
Based on current Montana labor rates and material prices, a typical wood & vinyl fence costs about $6,946. Most projects fall between $6,112 and $7,988, or roughly $46 per linear foot. This example assumes: length 150 ft, height 6 ft, material Pressure-treated pine, posts 21.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 75 ft | $4,028 |
| 150 ft | $6,946 |
| 300 ft | $12,886 |
Where the money goes
- Rails & panels$3,414 (62%)
- Posts & footings$1,351 (25%)
- Gates$379 (7%)
- Permit & utility locate$348 (6%)
Materials $2,805 · Labor $2,550 (54 hours) · Equipment, disposal & permits $136 — before contingency, contractor overhead & profit and tax.
Montana vs. United States average
A typical wood & vinyl fence in Montana costs 2% less than the United States average ($6,946 vs. $7,078). The difference comes mainly from local wages — a carpenter earns on average $28.68 per hour in Montana — and from regional material prices and Sales tax (materials) of 0%.
Wood & Vinyl Fence in Montana: local factors
Montana ranks 27th of 51 states for wood & vinyl fence cost (1 = most expensive) — in the middle.
| Nearby state | Typical cost | vs. Montana |
|---|---|---|
| Montana | $6,946 | — |
| Idaho | $6,701 | -4% |
| North Dakota | $6,972 | 0% |
| South Dakota | $6,505 | -6% |
| Wyoming | $6,761 | -3% |
What affects the price in Montana
- Deep frost: Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post.
- Wildfire risk: Decks and fences attached to the house may need ignition-resistant or non-combustible materials near the walls.
Permits & contractor licensing in Montana
- Contractor license: Licensing rules in Montana depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in Montana are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Montana
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Fence erector | 54 | $23.55 | $47.10 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a wood & vinyl fence includes
Fence cost is driven by length, height, material and gates. Posts set in concrete every 8 ft, rails and pickets or panels make up the materials; labor is mostly digging and setting posts.
Main cost factors
- Fence length and height
- Material (pine, cedar, vinyl)
- Style
- Number of gates
- Old fence removal
How to save money
- Pressure-treated pine is the cheapest; cedar resists rot naturally.
- Vinyl costs more up front but never needs staining.
- Share the cost with neighbors on property-line fences.
- Call your utility locate service before digging.
Timeline
2–4 days for 150 ft.
Permits
Many cities require a permit for fences over 6 ft; HOAs may have style rules.
Frequently asked questions
How much does a wood & vinyl fence cost in Montana?
A typical wood & vinyl fence in Montana costs about $6,946, with most projects between $6,112 and $7,988. That is about $46 per linear foot.
How much of the cost is labor?
Labor is about 46% of the direct cost (54 work hours) for a typical project in Montana. Materials are $2,805 and equipment, disposal and permits $136, before contingency, contractor overhead and tax.
Is a wood & vinyl fence cheaper in Montana than in nearby states?
A typical wood & vinyl fence costs $6,946 in Montana. Among nearby states, South Dakota is the lowest at $6,505 and North Dakota the highest at $6,972. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Montana?
Licensing rules in Montana depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
What local conditions affect wood & vinyl fence costs in Montana?
Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post. Decks and fences attached to the house may need ignition-resistant or non-combustible materials near the walls.
How long does a wood & vinyl fence take?
2–4 days for 150 ft.
Do I need a permit for a wood & vinyl fence?
Many cities require a permit for fences over 6 ft; HOAs may have style rules.
How much does a fence cost per foot?
See the cost per linear foot (or metre) under the total.
How long does a wood fence last?
10–15 years for treated pine, 15–20 for cedar with regular sealing.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Wood & Vinyl Fence cost in other states
Compare wood & vinyl fence costs in every state, province and territory →