Wood & Vinyl Fence Cost Calculator — New Jersey
Average wood & vinyl fence cost in New Jersey: $8,103 (typical range $7,131–$9,318, $54 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from New Jersey pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a wood & vinyl fence cost in New Jersey?
Based on current New Jersey labor rates and material prices, a typical wood & vinyl fence costs about $8,103. Most projects fall between $7,131 and $9,318, or roughly $54 per linear foot. This example assumes: length 150 ft, height 6 ft, material Pressure-treated pine, posts 21.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 75 ft | $4,692 |
| 150 ft | $8,103 |
| 300 ft | $15,045 |
Where the money goes
- Rails & panels$3,881 (62%)
- Posts & footings$1,542 (25%)
- Gates$424 (7%)
- Permit & utility locate$407 (7%)
Materials $2,914 · Labor $3,198 (54 hours) · Equipment, disposal & permits $141 — before contingency, contractor overhead & profit and tax.
New Jersey vs. United States average
A typical wood & vinyl fence in New Jersey costs 14% more than the United States average ($8,103 vs. $7,078). The difference comes mainly from local wages — a carpenter earns on average $34.61 per hour in New Jersey — and from regional material prices and Sales tax (materials) of 6.625%.
Wood & Vinyl Fence in New Jersey: local factors
New Jersey ranks 5th of 51 states for wood & vinyl fence cost (1 = most expensive) — among the most expensive.
| Nearby state | Typical cost | vs. New Jersey |
|---|---|---|
| New Jersey | $8,103 | — |
| Delaware | $6,893 | -15% |
| New York | $8,030 | -1% |
| Pennsylvania | $7,274 | -10% |
What affects the price in New Jersey
- Moderate frost: Posts and footings typically go 24–42 in. (0.6–1.1 m) deep to stay below the frost line.
Permits & contractor licensing in New Jersey
- Contractor license: Home improvement contractors must register with the NJ Division of Consumer Affairs; new-home builders register under the New Home Warranty program.
- Building code: The New Jersey Uniform Construction Code applies statewide.
- Permits: Permits are issued by the municipal construction office; most remodels need building, plumbing or electrical subcode permits.
Verify a contractor: NJ Division of Consumer Affairs ↗. Rules change — always confirm with your local building department.
Labor rates for this project in New Jersey
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Fence erector | 54 | $29.53 | $59.06 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a wood & vinyl fence includes
Fence cost is driven by length, height, material and gates. Posts set in concrete every 8 ft, rails and pickets or panels make up the materials; labor is mostly digging and setting posts.
Main cost factors
- Fence length and height
- Material (pine, cedar, vinyl)
- Style
- Number of gates
- Old fence removal
How to save money
- Pressure-treated pine is the cheapest; cedar resists rot naturally.
- Vinyl costs more up front but never needs staining.
- Share the cost with neighbors on property-line fences.
- Call your utility locate service before digging.
Timeline
2–4 days for 150 ft.
Permits
Many cities require a permit for fences over 6 ft; HOAs may have style rules.
Frequently asked questions
How much does a wood & vinyl fence cost in New Jersey?
A typical wood & vinyl fence in New Jersey costs about $8,103, with most projects between $7,131 and $9,318. That is about $54 per linear foot.
How much of the cost is labor?
Labor is about 51% of the direct cost (54 work hours) for a typical project in New Jersey. Materials are $2,914 and equipment, disposal and permits $141, before contingency, contractor overhead and tax.
Is a wood & vinyl fence cheaper in New Jersey than in nearby states?
A typical wood & vinyl fence costs $8,103 in New Jersey. Among nearby states, Delaware is the lowest at $6,893 and New York the highest at $8,030. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in New Jersey?
Home improvement contractors must register with the NJ Division of Consumer Affairs; new-home builders register under the New Home Warranty program.
What local conditions affect wood & vinyl fence costs in New Jersey?
Posts and footings typically go 24–42 in. (0.6–1.1 m) deep to stay below the frost line.
How long does a wood & vinyl fence take?
2–4 days for 150 ft.
Do I need a permit for a wood & vinyl fence?
Many cities require a permit for fences over 6 ft; HOAs may have style rules.
How much does a fence cost per foot?
See the cost per linear foot (or metre) under the total.
How long does a wood fence last?
10–15 years for treated pine, 15–20 for cedar with regular sealing.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Wood & Vinyl Fence cost in other states
Compare wood & vinyl fence costs in every state, province and territory →