Wood & Vinyl Fence Cost Calculator — North Dakota
Average wood & vinyl fence cost in North Dakota: $6,972 (typical range $6,135–$8,018, $46 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from North Dakota pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a wood & vinyl fence cost in North Dakota?
Based on current North Dakota labor rates and material prices, a typical wood & vinyl fence costs about $6,972. Most projects fall between $6,135 and $8,018, or roughly $46 per linear foot. This example assumes: length 150 ft, height 6 ft, material Pressure-treated pine, posts 21.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 75 ft | $4,041 |
| 150 ft | $6,972 |
| 300 ft | $12,938 |
Where the money goes
- Rails & panels$3,358 (62%)
- Posts & footings$1,330 (25%)
- Gates$372 (7%)
- Permit & utility locate$342 (6%)
Materials $2,751 · Labor $2,519 (54 hours) · Equipment, disposal & permits $133 — before contingency, contractor overhead & profit and tax.
North Dakota vs. United States average
A typical wood & vinyl fence in North Dakota costs 1% less than the United States average ($6,972 vs. $7,078). The difference comes mainly from local wages — a carpenter earns on average $27.88 per hour in North Dakota — and from regional material prices and Sales tax (materials) of 5%.
Wood & Vinyl Fence in North Dakota: local factors
North Dakota ranks 25th of 51 states for wood & vinyl fence cost (1 = most expensive) — in the middle.
| Nearby state | Typical cost | vs. North Dakota |
|---|---|---|
| North Dakota | $6,972 | — |
| Minnesota | $7,779 | +12% |
| Montana | $6,946 | -0% |
| South Dakota | $6,505 | -7% |
What affects the price in North Dakota
- Deep frost: Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post.
Permits & contractor licensing in North Dakota
- Contractor license: Licensing rules in North Dakota depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in North Dakota are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in North Dakota
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Fence erector | 54 | $23.26 | $46.52 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a wood & vinyl fence includes
Fence cost is driven by length, height, material and gates. Posts set in concrete every 8 ft, rails and pickets or panels make up the materials; labor is mostly digging and setting posts.
Main cost factors
- Fence length and height
- Material (pine, cedar, vinyl)
- Style
- Number of gates
- Old fence removal
How to save money
- Pressure-treated pine is the cheapest; cedar resists rot naturally.
- Vinyl costs more up front but never needs staining.
- Share the cost with neighbors on property-line fences.
- Call your utility locate service before digging.
Timeline
2–4 days for 150 ft.
Permits
Many cities require a permit for fences over 6 ft; HOAs may have style rules.
Frequently asked questions
How much does a wood & vinyl fence cost in North Dakota?
A typical wood & vinyl fence in North Dakota costs about $6,972, with most projects between $6,135 and $8,018. That is about $46 per linear foot.
How much of the cost is labor?
Labor is about 47% of the direct cost (54 work hours) for a typical project in North Dakota. Materials are $2,751 and equipment, disposal and permits $133, before contingency, contractor overhead and tax.
Is a wood & vinyl fence cheaper in North Dakota than in nearby states?
A typical wood & vinyl fence costs $6,972 in North Dakota. Among nearby states, South Dakota is the lowest at $6,505 and Minnesota the highest at $7,779. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in North Dakota?
Licensing rules in North Dakota depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
What local conditions affect wood & vinyl fence costs in North Dakota?
Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post.
How long does a wood & vinyl fence take?
2–4 days for 150 ft.
Do I need a permit for a wood & vinyl fence?
Many cities require a permit for fences over 6 ft; HOAs may have style rules.
How much does a fence cost per foot?
See the cost per linear foot (or metre) under the total.
How long does a wood fence last?
10–15 years for treated pine, 15–20 for cedar with regular sealing.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Wood & Vinyl Fence cost in other states
Compare wood & vinyl fence costs in every state, province and territory →