Paver Patio Cost Calculator — New Jersey
Average paver patio cost in New Jersey: $7,095 (typical range $6,244–$8,159, $24 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from New Jersey pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a paver patio cost in New Jersey?
Based on current New Jersey labor rates and material prices, a typical paver patio costs about $7,095. Most projects fall between $6,244 and $8,159, or roughly $24 per sq ft. This example assumes: patio area 300 sq ft, paver Concrete pavers, base 6".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 150 sq ft | $3,978 |
| 300 sq ft | $7,095 |
| 600 sq ft | $13,795 |
Where the money goes
- Pavers$3,063 (56%)
- Excavation$1,263 (23%)
- Base$1,153 (21%)
Materials $2,474 · Labor $2,002 (41 hours) · Equipment, disposal & permits $1,003 — before contingency, contractor overhead & profit and tax.
New Jersey vs. United States average
A typical paver patio in New Jersey costs 12% more than the United States average ($7,095 vs. $6,312). The difference comes mainly from local wages — a carpenter earns on average $34.61 per hour in New Jersey — and from regional material prices and Sales tax (materials) of 6.625%.
Paver Patio in New Jersey: local factors
New Jersey ranks 6th of 51 states for paver patio cost (1 = most expensive) — among the most expensive.
| Nearby state | Typical cost | vs. New Jersey |
|---|---|---|
| New Jersey | $7,095 | — |
| Delaware | $6,202 | -13% |
| New York | $7,088 | -0% |
| Pennsylvania | $6,478 | -9% |
Permits & contractor licensing in New Jersey
- Contractor license: Home improvement contractors must register with the NJ Division of Consumer Affairs; new-home builders register under the New Home Warranty program.
- Building code: The New Jersey Uniform Construction Code applies statewide.
- Permits: Permits are issued by the municipal construction office; most remodels need building, plumbing or electrical subcode permits.
Verify a contractor: NJ Division of Consumer Affairs ↗. Rules change — always confirm with your local building department.
Labor rates for this project in New Jersey
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Landscaper / hardscape | 41 | $24.71 | $49.42 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a paver patio includes
A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.
Main cost factors
- Patio area
- Paver type
- Base depth
- Borders and edging
- Steps or seat walls
How to save money
- Do not skimp on base depth on clay soils.
- Simple running-bond patterns waste less paver material.
- Permeable pavers can reduce storm-water fees in some cities.
- Seat walls and steps add the most cost per square foot.
Timeline
2–5 days.
Permits
Usually not required for ground-level patios; check lot coverage rules.
Frequently asked questions
How much does a paver patio cost in New Jersey?
A typical paver patio in New Jersey costs about $7,095, with most projects between $6,244 and $8,159. That is about $24 per sq ft.
How much of the cost is labor?
Labor is about 37% of the direct cost (41 work hours) for a typical project in New Jersey. Materials are $2,474 and equipment, disposal and permits $1,003, before contingency, contractor overhead and tax.
Is a paver patio cheaper in New Jersey than in nearby states?
A typical paver patio costs $7,095 in New Jersey. Among nearby states, Delaware is the lowest at $6,202 and New York the highest at $7,088. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in New Jersey?
Home improvement contractors must register with the NJ Division of Consumer Affairs; new-home builders register under the New Home Warranty program.
How long does a paver patio take?
2–5 days.
Do I need a permit for a paver patio?
Usually not required for ground-level patios; check lot coverage rules.
How much base gravel do I need?
See the “Base” category for cubic yards for your base depth.
How long do paver patios last?
25–50 years with occasional re-sanding of joints.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Paver Patio cost in other states
Compare paver patio costs in every state, province and territory →