Electrical Rewiring & Panel Cost Calculator — North Dakota
Average electrical rewiring & panel cost in North Dakota: $27,519 (typical range $24,217–$31,647, $15 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from North Dakota pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a electrical rewiring & panel cost in North Dakota?
Based on current North Dakota labor rates and material prices, a typical electrical rewiring & panel costs about $27,519. Most projects fall between $24,217 and $31,647, or roughly $15 per sq ft. This example assumes: home size 1,800 sq ft, scope Full rewire, panel 200 A, ev charger No.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 900 sq ft | $16,424 |
| 1,800 sq ft | $27,519 |
| 3,600 sq ft | $49,709 |
Where the money goes
- Rewiring$13,736 (64%)
- Wall repair$3,340 (16%)
- Service & panel$3,164 (15%)
- Extras$924 (4%)
- Permit & inspection$326 (2%)
Materials $6,688 · Labor $14,254 (230 hours) · Equipment, disposal & permits $547 — before contingency, contractor overhead & profit and tax.
North Dakota vs. United States average
A typical electrical rewiring & panel in North Dakota costs 5% less than the United States average ($27,519 vs. $28,860). The difference comes mainly from local wages — a carpenter earns on average $27.88 per hour in North Dakota — and from regional material prices and Sales tax (materials) of 5%.
Electrical Rewiring & Panel in North Dakota: local factors
North Dakota ranks 29th of 51 states for electrical rewiring & panel cost (1 = most expensive) — in the middle.
| Nearby state | Typical cost | vs. North Dakota |
|---|---|---|
| North Dakota | $27,519 | — |
| Minnesota | $31,348 | +14% |
| Montana | $28,618 | +4% |
| South Dakota | $25,801 | -6% |
Permits & contractor licensing in North Dakota
- Contractor license: Licensing rules in North Dakota depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in North Dakota are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in North Dakota
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Electrician | 171 | $33.87 | $67.74 |
| Drywall installer | 60 | $22.53 | $45.06 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a electrical rewiring & panel includes
Rewiring includes a new panel and service, new circuits fished through walls, outlets, switches and detectors, plus patching the access holes. Plaster walls take longer than drywall.
Main cost factors
- Home size
- Panel size
- Full or partial rewire
- Wall repair after rewiring
- EV charger
How to save money
- Upgrade to a 200 A panel if you plan an EV charger, heat pump or induction cooking.
- Do rewiring before painting and flooring.
- Add outlets and USB-C receptacles while walls are open.
- Whole-home surge protection is inexpensive insurance.
Timeline
3–10 days for a full rewire.
Permits
Electrical permits and inspections are always required; utility coordination is needed for service upgrades.
Frequently asked questions
How much does a electrical rewiring & panel cost in North Dakota?
A typical electrical rewiring & panel in North Dakota costs about $27,519, with most projects between $24,217 and $31,647. That is about $15 per sq ft.
How much of the cost is labor?
Labor is about 66% of the direct cost (230 work hours) for a typical project in North Dakota. Materials are $6,688 and equipment, disposal and permits $547, before contingency, contractor overhead and tax.
Is a electrical rewiring & panel cheaper in North Dakota than in nearby states?
A typical electrical rewiring & panel costs $27,519 in North Dakota. Among nearby states, South Dakota is the lowest at $25,801 and Minnesota the highest at $31,348. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in North Dakota?
Licensing rules in North Dakota depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
How long does a electrical rewiring & panel take?
3–10 days for a full rewire.
Do I need a permit for a electrical rewiring & panel?
Electrical permits and inspections are always required; utility coordination is needed for service upgrades.
Do I need to rewire an old house?
Homes with knob-and-tube, aluminum branch wiring or a fuse box are strong candidates.
How much does a panel upgrade cost?
Choose “Panel upgrade only” to see just the panel and service cost.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Electrical Rewiring & Panel cost in other states
Compare electrical rewiring & panel costs in every state, province and territory →