Block Wall Fence Cost Calculator — Colorado
Average block wall fence cost in Colorado: $21,286 (typical range $18,732–$24,479, $213 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Colorado pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a block wall fence cost in Colorado?
Based on current Colorado labor rates and material prices, a typical block wall fence costs about $21,286. Most projects fall between $18,732 and $24,479, or roughly $213 per linear foot. This example assumes: length 100 ft, height 6 ft, blocks 709, face area 600 sq ft.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 50 ft | $12,391 |
| 100 ft | $21,286 |
| 200 ft | $39,574 |
Where the money goes
- Block wall$10,213 (61%)
- Excavation & footing$4,361 (26%)
- Gates$850 (5%)
- Permit & engineering$734 (4%)
- Cap & finish$519 (3%)
Materials $6,551 · Labor $8,450 (152 hours) · Equipment, disposal & permits $1,676 — before contingency, contractor overhead & profit and tax.
Colorado vs. United States average
A typical block wall fence in Colorado costs 2% less than the United States average ($21,286 vs. $21,702). The difference comes mainly from local wages — a carpenter earns on average $31.82 per hour in Colorado — and from regional material prices and Sales tax (materials) of 2.9%.
Block Wall Fence in Colorado: local factors
Colorado ranks 25th of 51 states for block wall fence cost (1 = most expensive) — in the middle.
| Nearby state | Typical cost | vs. Colorado |
|---|---|---|
| Colorado | $21,286 | — |
| Arizona | $20,584 | -3% |
| Kansas | $20,300 | -5% |
| Nebraska | $20,315 | -5% |
| New Mexico | $18,719 | -12% |
| Oklahoma | $19,071 | -10% |
| Utah | $20,537 | -4% |
| Wyoming | $20,840 | -2% |
What affects the price in Colorado
- Moderate frost: Posts and footings typically go 24–42 in. (0.6–1.1 m) deep to stay below the frost line.
Permits & contractor licensing in Colorado
- Contractor license: Licensing rules in Colorado depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in Colorado are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Colorado
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Brick / block mason | 75 | $30.70 | $61.40 |
| Construction laborer | 65 | $23.96 | $47.92 |
| Cement mason / concrete finisher | 8 | $29.01 | $58.02 |
| Ironworker / welder | 4 | $32.86 | $65.72 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a block wall fence includes
A concrete block (CMU) wall needs a reinforced footing, vertical rebar grouted into the cells, horizontal reinforcement, mortar and a cap. Stucco or paint finish adds cost and life. Walls over 4 ft often need engineering.
Main cost factors
- Wall length and height
- Block type
- Footing and rebar
- Pilasters and cap
- Stucco or paint finish
How to save money
- Closer rebar spacing is required in high-wind and seismic areas.
- Split-face block looks finished without stucco.
- Pilasters every 10–16 ft stiffen tall walls.
- Plan drainage behind walls that hold back soil.
Timeline
1–3 weeks depending on length.
Permits
Walls over 4 ft (or retaining walls) usually need a permit and engineered design.
Frequently asked questions
How much does a block wall fence cost in Colorado?
A typical block wall fence in Colorado costs about $21,286, with most projects between $18,732 and $24,479. That is about $213 per linear foot.
How much of the cost is labor?
Labor is about 51% of the direct cost (152 work hours) for a typical project in Colorado. Materials are $6,551 and equipment, disposal and permits $1,676, before contingency, contractor overhead and tax.
Is a block wall fence cheaper in Colorado than in nearby states?
A typical block wall fence costs $21,286 in Colorado. Among nearby states, New Mexico is the lowest at $18,719 and Wyoming the highest at $20,840. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Colorado?
Licensing rules in Colorado depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
What local conditions affect block wall fence costs in Colorado?
Posts and footings typically go 24–42 in. (0.6–1.1 m) deep to stay below the frost line.
How long does a block wall fence take?
1–3 weeks depending on length.
Do I need a permit for a block wall fence?
Walls over 4 ft (or retaining walls) usually need a permit and engineered design.
How many blocks do I need?
The breakdown shows the block count (wall face area ÷ 0.89 sq ft per block + 5%).
Block wall or wood fence?
Block walls cost more but last 50+ years and block noise.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Block Wall Fence cost in other states
Compare block wall fence costs in every state, province and territory →