Block Wall Fence Cost Calculator — Virginia
Average block wall fence cost in Virginia: $19,710 (typical range $17,345–$22,667, $197 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Virginia pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a block wall fence cost in Virginia?
Based on current Virginia labor rates and material prices, a typical block wall fence costs about $19,710. Most projects fall between $17,345 and $22,667, or roughly $197 per linear foot. This example assumes: length 100 ft, height 6 ft, blocks 709, face area 600 sq ft.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 50 ft | $11,553 |
| 100 ft | $19,710 |
| 200 ft | $36,514 |
Where the money goes
- Block wall$9,264 (60%)
- Excavation & footing$4,054 (26%)
- Gates$806 (5%)
- Permit & engineering$713 (5%)
- Cap & finish$477 (3%)
Materials $6,360 · Labor $7,327 (152 hours) · Equipment, disposal & permits $1,628 — before contingency, contractor overhead & profit and tax.
Virginia vs. United States average
A typical block wall fence in Virginia costs 9% less than the United States average ($19,710 vs. $21,702). The difference comes mainly from local wages — a carpenter earns on average $26.63 per hour in Virginia — and from regional material prices and Sales tax (materials) of 5.3%.
Block Wall Fence in Virginia: local factors
Virginia ranks 40th of 51 states for block wall fence cost (1 = most expensive) — among the most affordable.
| Nearby state | Typical cost | vs. Virginia |
|---|---|---|
| Virginia | $19,710 | — |
| Kentucky | $19,910 | +1% |
| Maryland | $20,649 | +5% |
| North Carolina | $19,026 | -3% |
| Tennessee | $20,401 | +4% |
| West Virginia | $19,292 | -2% |
| District of Columbia | $23,352 | +18% |
What affects the price in Virginia
- Moderate frost: Posts and footings typically go 24–42 in. (0.6–1.1 m) deep to stay below the frost line.
Permits & contractor licensing in Virginia
- Contractor license: Contractors need a DPOR license for work over $1,000 — Class C, B or A depending on the size of the job.
- Building code: The Virginia Uniform Statewide Building Code applies everywhere, enforced by the locality.
- Permits: Permits are issued by the city or county building department.
Verify a contractor: Virginia DPOR – Board for Contractors ↗. Rules change — always confirm with your local building department.
Labor rates for this project in Virginia
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Brick / block mason | 75 | $26.34 | $52.68 |
| Construction laborer | 65 | $21.00 | $42.00 |
| Cement mason / concrete finisher | 8 | $25.43 | $50.86 |
| Ironworker / welder | 4 | $29.51 | $59.02 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a block wall fence includes
A concrete block (CMU) wall needs a reinforced footing, vertical rebar grouted into the cells, horizontal reinforcement, mortar and a cap. Stucco or paint finish adds cost and life. Walls over 4 ft often need engineering.
Main cost factors
- Wall length and height
- Block type
- Footing and rebar
- Pilasters and cap
- Stucco or paint finish
How to save money
- Closer rebar spacing is required in high-wind and seismic areas.
- Split-face block looks finished without stucco.
- Pilasters every 10–16 ft stiffen tall walls.
- Plan drainage behind walls that hold back soil.
Timeline
1–3 weeks depending on length.
Permits
Walls over 4 ft (or retaining walls) usually need a permit and engineered design.
Frequently asked questions
How much does a block wall fence cost in Virginia?
A typical block wall fence in Virginia costs about $19,710, with most projects between $17,345 and $22,667. That is about $197 per linear foot.
How much of the cost is labor?
Labor is about 48% of the direct cost (152 work hours) for a typical project in Virginia. Materials are $6,360 and equipment, disposal and permits $1,628, before contingency, contractor overhead and tax.
Is a block wall fence cheaper in Virginia than in nearby states?
A typical block wall fence costs $19,710 in Virginia. Among nearby states, North Carolina is the lowest at $19,026 and District of Columbia the highest at $23,352. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Virginia?
Contractors need a DPOR license for work over $1,000 — Class C, B or A depending on the size of the job.
What local conditions affect block wall fence costs in Virginia?
Posts and footings typically go 24–42 in. (0.6–1.1 m) deep to stay below the frost line.
How long does a block wall fence take?
1–3 weeks depending on length.
Do I need a permit for a block wall fence?
Walls over 4 ft (or retaining walls) usually need a permit and engineered design.
How many blocks do I need?
The breakdown shows the block count (wall face area ÷ 0.89 sq ft per block + 5%).
Block wall or wood fence?
Block walls cost more but last 50+ years and block noise.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Block Wall Fence cost in other states
Compare block wall fence costs in every state, province and territory →