Block Wall Fence Cost Calculator — Mississippi
Average block wall fence cost in Mississippi: $18,304 (typical range $16,108–$21,050, $183 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Mississippi pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a block wall fence cost in Mississippi?
Based on current Mississippi labor rates and material prices, a typical block wall fence costs about $18,304. Most projects fall between $16,108 and $21,050, or roughly $183 per linear foot. This example assumes: length 100 ft, height 6 ft, blocks 709, face area 600 sq ft.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 50 ft | $10,762 |
| 100 ft | $18,304 |
| 200 ft | $33,859 |
Where the money goes
- Block wall$8,506 (60%)
- Excavation & footing$3,765 (27%)
- Gates$747 (5%)
- Permit & engineering$677 (5%)
- Cap & finish$440 (3%)
Materials $6,042 · Labor $6,547 (152 hours) · Equipment, disposal & permits $1,546 — before contingency, contractor overhead & profit and tax.
Mississippi vs. United States average
A typical block wall fence in Mississippi costs 16% less than the United States average ($18,304 vs. $21,702). The difference comes mainly from local wages — a carpenter earns on average $23.69 per hour in Mississippi — and from regional material prices and Sales tax (materials) of 7%.
Block Wall Fence in Mississippi: local factors
Mississippi ranks 50th of 51 states for block wall fence cost (1 = most expensive) — among the most affordable.
| Nearby state | Typical cost | vs. Mississippi |
|---|---|---|
| Mississippi | $18,304 | — |
| Alabama | $18,268 | -0% |
| Arkansas | $18,604 | +2% |
| Louisiana | $19,369 | +6% |
| Tennessee | $20,401 | +11% |
What affects the price in Mississippi
- Hurricane-force winds: Fences must resist high winds: deeper concrete-set posts, closer post spacing or reinforced masonry.
Permits & contractor licensing in Mississippi
- Contractor license: Licensing rules in Mississippi depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in Mississippi are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Mississippi
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Brick / block mason | 75 | $23.23 | $46.46 |
| Construction laborer | 65 | $19.38 | $38.76 |
| Cement mason / concrete finisher | 8 | $20.90 | $41.80 |
| Ironworker / welder | 4 | $25.62 | $51.24 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a block wall fence includes
A concrete block (CMU) wall needs a reinforced footing, vertical rebar grouted into the cells, horizontal reinforcement, mortar and a cap. Stucco or paint finish adds cost and life. Walls over 4 ft often need engineering.
Main cost factors
- Wall length and height
- Block type
- Footing and rebar
- Pilasters and cap
- Stucco or paint finish
How to save money
- Closer rebar spacing is required in high-wind and seismic areas.
- Split-face block looks finished without stucco.
- Pilasters every 10–16 ft stiffen tall walls.
- Plan drainage behind walls that hold back soil.
Timeline
1–3 weeks depending on length.
Permits
Walls over 4 ft (or retaining walls) usually need a permit and engineered design.
Frequently asked questions
How much does a block wall fence cost in Mississippi?
A typical block wall fence in Mississippi costs about $18,304, with most projects between $16,108 and $21,050. That is about $183 per linear foot.
How much of the cost is labor?
Labor is about 46% of the direct cost (152 work hours) for a typical project in Mississippi. Materials are $6,042 and equipment, disposal and permits $1,546, before contingency, contractor overhead and tax.
Is a block wall fence cheaper in Mississippi than in nearby states?
A typical block wall fence costs $18,304 in Mississippi. Among nearby states, Alabama is the lowest at $18,268 and Tennessee the highest at $20,401. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Mississippi?
Licensing rules in Mississippi depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
What local conditions affect block wall fence costs in Mississippi?
Fences must resist high winds: deeper concrete-set posts, closer post spacing or reinforced masonry.
How long does a block wall fence take?
1–3 weeks depending on length.
Do I need a permit for a block wall fence?
Walls over 4 ft (or retaining walls) usually need a permit and engineered design.
How many blocks do I need?
The breakdown shows the block count (wall face area ÷ 0.89 sq ft per block + 5%).
Block wall or wood fence?
Block walls cost more but last 50+ years and block noise.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Block Wall Fence cost in other states
Compare block wall fence costs in every state, province and territory →