Block Wall Fence Cost Calculator — North Carolina
Average block wall fence cost in North Carolina: $19,026 (typical range $16,743–$21,880, $190 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from North Carolina pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a block wall fence cost in North Carolina?
Based on current North Carolina labor rates and material prices, a typical block wall fence costs about $19,026. Most projects fall between $16,743 and $21,880, or roughly $190 per linear foot. This example assumes: length 100 ft, height 6 ft, blocks 709, face area 600 sq ft.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 50 ft | $11,149 |
| 100 ft | $19,026 |
| 200 ft | $35,255 |
Where the money goes
- Block wall$8,910 (60%)
- Excavation & footing$3,984 (27%)
- Gates$769 (5%)
- Permit & engineering$692 (5%)
- Cap & finish$454 (3%)
Materials $6,169 · Labor $7,061 (152 hours) · Equipment, disposal & permits $1,579 — before contingency, contractor overhead & profit and tax.
North Carolina vs. United States average
A typical block wall fence in North Carolina costs 12% less than the United States average ($19,026 vs. $21,702). The difference comes mainly from local wages — a carpenter earns on average $24.28 per hour in North Carolina — and from regional material prices and Sales tax (materials) of 4.75%.
Block Wall Fence in North Carolina: local factors
North Carolina ranks 47th of 51 states for block wall fence cost (1 = most expensive) — among the most affordable.
| Nearby state | Typical cost | vs. North Carolina |
|---|---|---|
| North Carolina | $19,026 | — |
| Georgia | $19,045 | 0% |
| South Carolina | $19,437 | +2% |
| Tennessee | $20,401 | +7% |
| Virginia | $19,710 | +4% |
What affects the price in North Carolina
- Hurricane-force winds: Fences must resist high winds: deeper concrete-set posts, closer post spacing or reinforced masonry.
Permits & contractor licensing in North Carolina
- Contractor license: Projects of $40,000 or more require a license from the NC Licensing Board for General Contractors; electrical, plumbing and HVAC work need separate state licenses.
- Building code: The North Carolina Residential Code applies statewide, enforced by county and city inspection departments.
- Permits: Permits are issued by the county or city inspections department; homeowners may pull permits for work on their own home.
Verify a contractor: NC Licensing Board for General Contractors ↗. Rules change — always confirm with your local building department.
Labor rates for this project in North Carolina
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Brick / block mason | 75 | $24.32 | $48.64 |
| Construction laborer | 65 | $21.76 | $43.52 |
| Cement mason / concrete finisher | 8 | $22.70 | $45.40 |
| Ironworker / welder | 4 | $27.00 | $54.00 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a block wall fence includes
A concrete block (CMU) wall needs a reinforced footing, vertical rebar grouted into the cells, horizontal reinforcement, mortar and a cap. Stucco or paint finish adds cost and life. Walls over 4 ft often need engineering.
Main cost factors
- Wall length and height
- Block type
- Footing and rebar
- Pilasters and cap
- Stucco or paint finish
How to save money
- Closer rebar spacing is required in high-wind and seismic areas.
- Split-face block looks finished without stucco.
- Pilasters every 10–16 ft stiffen tall walls.
- Plan drainage behind walls that hold back soil.
Timeline
1–3 weeks depending on length.
Permits
Walls over 4 ft (or retaining walls) usually need a permit and engineered design.
Frequently asked questions
How much does a block wall fence cost in North Carolina?
A typical block wall fence in North Carolina costs about $19,026, with most projects between $16,743 and $21,880. That is about $190 per linear foot.
How much of the cost is labor?
Labor is about 48% of the direct cost (152 work hours) for a typical project in North Carolina. Materials are $6,169 and equipment, disposal and permits $1,579, before contingency, contractor overhead and tax.
Is a block wall fence cheaper in North Carolina than in nearby states?
A typical block wall fence costs $19,026 in North Carolina. Among nearby states, Georgia is the lowest at $19,045 and Tennessee the highest at $20,401. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in North Carolina?
Projects of $40,000 or more require a license from the NC Licensing Board for General Contractors; electrical, plumbing and HVAC work need separate state licenses.
What local conditions affect block wall fence costs in North Carolina?
Fences must resist high winds: deeper concrete-set posts, closer post spacing or reinforced masonry.
How long does a block wall fence take?
1–3 weeks depending on length.
Do I need a permit for a block wall fence?
Walls over 4 ft (or retaining walls) usually need a permit and engineered design.
How many blocks do I need?
The breakdown shows the block count (wall face area ÷ 0.89 sq ft per block + 5%).
Block wall or wood fence?
Block walls cost more but last 50+ years and block noise.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Block Wall Fence cost in other states
Compare block wall fence costs in every state, province and territory →