Block Wall Fence Cost Calculator — Arizona

Average block wall fence cost in Arizona: $20,584 (typical range $18,114–$23,672, $206 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Arizona pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a block wall fence cost in Arizona?

Based on current Arizona labor rates and material prices, a typical block wall fence costs about $20,584. Most projects fall between $18,114 and $23,672, or roughly $206 per linear foot. This example assumes: length 100 ft, height 6 ft, blocks 709, face area 600 sq ft.

Cost by project size

Project sizeEstimated cost
50 ft$11,981
100 ft$20,584
200 ft$38,276

Where the money goes

  • Block wall$9,780 (61%)
  • Excavation & footing$4,203 (26%)
  • Gates$808 (5%)
  • Permit & engineering$706 (4%)
  • Cap & finish$497 (3%)

Materials $6,296 · Labor $8,086 (152 hours) · Equipment, disposal & permits $1,611 — before contingency, contractor overhead & profit and tax.

Arizona vs. United States average

A typical block wall fence in Arizona costs 5% less than the United States average ($20,584 vs. $21,702). The difference comes mainly from local wages — a carpenter earns on average $28.36 per hour in Arizona — and from regional material prices and Sales tax (materials) of 5.6%.

Block Wall Fence in Arizona: local factors

Arizona ranks 30th of 51 states for block wall fence cost (1 = most expensive) — in the middle.

Nearby stateTypical costvs. Arizona
Arizona$20,584—
California$24,515+19%
Colorado$21,286+3%
New Mexico$18,719-9%
Nevada$21,542+5%
Utah$20,537-0%

Permits & contractor licensing in Arizona

  • Contractor license: Contractors must be licensed by the Arizona Registrar of Contractors (ROC); only small “handyman” jobs under a dollar limit are exempt.
  • Building code: Cities and counties adopt the International Residential Code with local amendments.
  • Permits: Permits are issued by the city or county; HOA approval is often needed too.

Verify a contractor: Arizona Registrar of Contractors ↗. Rules change — always confirm with your local building department.

Labor rates for this project in Arizona

TradeHoursAvg. wage / hourInstalled rate / hour
Brick / block mason75$29.25$58.50
Construction laborer65$23.03$46.06
Cement mason / concrete finisher8$28.62$57.24
Ironworker / welder4$30.38$60.76
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a block wall fence includes

A concrete block (CMU) wall needs a reinforced footing, vertical rebar grouted into the cells, horizontal reinforcement, mortar and a cap. Stucco or paint finish adds cost and life. Walls over 4 ft often need engineering.

Main cost factors

  • Wall length and height
  • Block type
  • Footing and rebar
  • Pilasters and cap
  • Stucco or paint finish

How to save money

  • Closer rebar spacing is required in high-wind and seismic areas.
  • Split-face block looks finished without stucco.
  • Pilasters every 10–16 ft stiffen tall walls.
  • Plan drainage behind walls that hold back soil.

Timeline

1–3 weeks depending on length.

Permits

Walls over 4 ft (or retaining walls) usually need a permit and engineered design.

Frequently asked questions

How much does a block wall fence cost in Arizona?

A typical block wall fence in Arizona costs about $20,584, with most projects between $18,114 and $23,672. That is about $206 per linear foot.

How much of the cost is labor?

Labor is about 51% of the direct cost (152 work hours) for a typical project in Arizona. Materials are $6,296 and equipment, disposal and permits $1,611, before contingency, contractor overhead and tax.

Is a block wall fence cheaper in Arizona than in nearby states?

A typical block wall fence costs $20,584 in Arizona. Among nearby states, New Mexico is the lowest at $18,719 and California the highest at $24,515. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Arizona?

Contractors must be licensed by the Arizona Registrar of Contractors (ROC); only small “handyman” jobs under a dollar limit are exempt.

How long does a block wall fence take?

1–3 weeks depending on length.

Do I need a permit for a block wall fence?

Walls over 4 ft (or retaining walls) usually need a permit and engineered design.

How many blocks do I need?

The breakdown shows the block count (wall face area ÷ 0.89 sq ft per block + 5%).

Block wall or wood fence?

Block walls cost more but last 50+ years and block noise.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Block Wall Fence cost in other states

Compare block wall fence costs in every state, province and territory →

More cost calculators for Arizona

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming