Block Wall Fence Cost Calculator — Alaska
Average block wall fence cost in Alaska: $26,875 (typical range $23,650–$30,906, $269 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Alaska pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a block wall fence cost in Alaska?
Based on current Alaska labor rates and material prices, a typical block wall fence costs about $26,875. Most projects fall between $23,650 and $30,906, or roughly $269 per linear foot. This example assumes: length 100 ft, height 6 ft, blocks 709, face area 600 sq ft.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 50 ft | $15,596 |
| 100 ft | $26,875 |
| 200 ft | $50,034 |
Where the money goes
- Block wall$13,058 (61%)
- Excavation & footing$5,535 (26%)
- Gates$1,071 (5%)
- Permit & engineering$913 (4%)
- Cap & finish$669 (3%)
Materials $8,141 · Labor $11,021 (152 hours) · Equipment, disposal & permits $2,083 — before contingency, contractor overhead & profit and tax.
Alaska vs. United States average
A typical block wall fence in Alaska costs 24% more than the United States average ($26,875 vs. $21,702). The difference comes mainly from local wages — a carpenter earns on average $38.68 per hour in Alaska — and from regional material prices and Sales tax (materials) of 0%.
Block Wall Fence in Alaska: local factors
Alaska ranks 3rd of 51 states for block wall fence cost (1 = most expensive) — among the most expensive.
| Nearby state | Typical cost | vs. Alaska |
|---|---|---|
| Alaska | $26,875 | — |
| Washington | $25,119 | -7% |
| Oregon | $23,480 | -13% |
What affects the price in Alaska
- Deep frost: Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post.
- Earthquake zone: Masonry walls need vertical rebar in grouted cells and an engineered footing in earthquake zones.
Permits & contractor licensing in Alaska
- Contractor license: Licensing rules in Alaska depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in Alaska are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Alaska
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Brick / block mason | 75 | $41.37 | $82.74 |
| Construction laborer | 65 | $28.50 | $57.00 |
| Cement mason / concrete finisher | 8 | $48.08 | $96.16 |
| Ironworker / welder | 4 | $42.58 | $85.16 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a block wall fence includes
A concrete block (CMU) wall needs a reinforced footing, vertical rebar grouted into the cells, horizontal reinforcement, mortar and a cap. Stucco or paint finish adds cost and life. Walls over 4 ft often need engineering.
Main cost factors
- Wall length and height
- Block type
- Footing and rebar
- Pilasters and cap
- Stucco or paint finish
How to save money
- Closer rebar spacing is required in high-wind and seismic areas.
- Split-face block looks finished without stucco.
- Pilasters every 10–16 ft stiffen tall walls.
- Plan drainage behind walls that hold back soil.
Timeline
1–3 weeks depending on length.
Permits
Walls over 4 ft (or retaining walls) usually need a permit and engineered design.
Frequently asked questions
How much does a block wall fence cost in Alaska?
A typical block wall fence in Alaska costs about $26,875, with most projects between $23,650 and $30,906. That is about $269 per linear foot.
How much of the cost is labor?
Labor is about 52% of the direct cost (152 work hours) for a typical project in Alaska. Materials are $8,141 and equipment, disposal and permits $2,083, before contingency, contractor overhead and tax.
Is a block wall fence cheaper in Alaska than in nearby states?
A typical block wall fence costs $26,875 in Alaska. Among nearby states, Oregon is the lowest at $23,480 and Washington the highest at $25,119. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Alaska?
Licensing rules in Alaska depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
What local conditions affect block wall fence costs in Alaska?
Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post. Masonry walls need vertical rebar in grouted cells and an engineered footing in earthquake zones.
How long does a block wall fence take?
1–3 weeks depending on length.
Do I need a permit for a block wall fence?
Walls over 4 ft (or retaining walls) usually need a permit and engineered design.
How many blocks do I need?
The breakdown shows the block count (wall face area ÷ 0.89 sq ft per block + 5%).
Block wall or wood fence?
Block walls cost more but last 50+ years and block noise.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Block Wall Fence cost in other states
Compare block wall fence costs in every state, province and territory →